Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Turbina XICOY X240 compact
3,385.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Brass control horn M4 short for wire (4 pcs)
2 x	Horn 5/20 with M2 Bearing
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Horn F3A de Titanium 16 mm (2 units)
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	6 mm M3 variable inclined horn
2 x	6 mm M3 variable horn
1 x	Cable with accesories
2 x	Horn 6/35 with M3 Bearing
1 x	Horn for flap control (1 pcs)
2 x	Control horn long w/ball
1 x	Cable control set
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Horn DUBRO 1/2A
1 x	Brass control horn M2 long for wire (10pcs)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Brass control horn M2 large for wire (2pcs)
2 x	Horn mando small (2 pcs)
2 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	20 mm carbon horn
2 x	Horn 5/10 with M2 Bearing
1 x	Adjustable brass horn threaded M3
1 x	Extra long horn 60x30
2 x	Brass control horn M2 short for wire (2 pcs)
1 x	6 mm red aluminium threaded horn with patella
1 x	Horn 20x28,5 mm (2 pcs)
2 x	5 mm M2 variable horn
1 x	6 mm blue aluminium threaded horn with patella
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
3 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
2 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
2 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Stainless steel cable Ø 0.62 mm (10 m)
2 x	Crimping sleeves for cable 0.70 mm (10 pcs)
2 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Aluminium alloy coupler for carbon tube 6/M4
2 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
2 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
2 x	Crimping sleeves for cable 1.3 mm (10 pcs)
2 x	USB Mini Camera endoscope
1 x	Circlik for shaft 1.9 mm (10 pcs)
2 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x
2 x	Horn 6/27 with M3 Bearing
1 x	Long ball link M3 (6 uds)
1 x	Interface Realflight Simulator
2 x	Horn 6/20 with M3 Bearing
2 x	PIT (Aero-Naut)
1 x	METEOR 1.000 mm kit
1 x	Soporte grifo FESTO (2 pcs)
1 x	Recessed MPX connector support (6 pcs)
1 x	Support ECU Xicoy X-45
1 x	Support Pitot JETI
1 x	Angle support XT60 conector
2 x	IKARUS plane
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Support Flush MPX Conector (6 pcs)
1 x	Futaba 38 mm servo arm with ball link
1 x	SD HC 8 GB
1 x	Futaba 14/20 mm servo pull-pull double arm with ball link
1 x	Futaba 46 mm servo arm with ball link
1 x	Futaba 20 mm servo arm
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Lead with adhesive (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm
2 x	Allen wheel collar M3x5
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	Snap long M2 (10 uds)
2 x	Split pin 1.6x16 mm (10 uds)
1 x	Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x	Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs)
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	Wing bolts M6 Steel screw Red (2 pcs)
1 x	Triple rod con. 2mm Pushrod (2 pcs)
1 x	Tip wing protector 40x14 (2 pcs)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Pushrod octagone 3/2 with coupler M2
1 x	ABS tube 16.0x14.0x1000 mm
2 x	ABS tube 7.0x5.0x1000 mm
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Fiberglass tube 6/4x1000mm
1 x	Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	ABS tube 12.0x10.0x1000 mm
1 x	Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x	ABS tube 5.0x4.0x156 mm
1 x	ABS tube 7.0x6.0x1000 mm
1 x	ABS tube 3.0x2.0x330 mm
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x	Xoar Electric Beechwood Prop 15x8
1 x	Xoar Electric Beechwood Prop 21x10
1 x	Snap short M2 (10 uds)
1 x	28x5 mm wires output (2 pcs)
1 x	Cockpit aluminium closing 5.4g
1 x	SUS wire 3m (nylon coated)
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x	Clip mini fixing for wing (2 pcs)
1 x	11 mm Rubber pads (14 pcs)
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled
1 x	Pushrod octagone 4/3
1 x	Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Cockpit metalic closing
2 x	41x5,5 mm wires output (2 pcs)
1 x	90 mm rods + T patellas set for direction control
1 x	Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs)
1 x	38x4,5 mm wires output (2 pcs)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
2 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs)
1 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	45 mm rods set for direction control
1 x	Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs)
1 x	Cockpit latch closing I=10 mm
1 x	80 mm rods set for direction control
1 x	Wing bolts M6 Steel screw Blue (2 pcs)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Turbo Timber Evolution 1.5m PNP
1 x	SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Cap Hispano Aviación
1 x	CC 05
1 x	DRACO 2.0m PNP
1 x	Turbo Timber Evolution 1.5m BNF
1 x	Connector Sub-D 2+5 Male
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	DRACO 2.0m Helice 14.5x9 4-Blade
1 x	DOMINO 46-55 Trainer 1583 mm
1 x	EDGE 540-A 105" (2660 mm)
1 x	SLICK 360-A 104" (2640 mm)
1 x	SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
2 x	TWIST planeador gomas
1 x	Ball link M2 (10 pcs)
1 x	Indoor landing gear set
1 x	Cable coupler M2x66 (2 uds)
1 x	Horizontal servo holder
1 x	6 mm ball link M3 (10 pcs)
1 x	Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x	Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	DUPLEX R7 receiver REX Assist
1 x	DUPLEX R6 receiver REX Assist
1 x	Receiver DUPLEX R9 EX 2.4 GHz
1 x	Receptor DUPLEX REX R9 Slim Assit
1 x	DUPLEX 2.4EX Satellite receiver Rsat 2
1 x	Crystal Universal RX 35.140 Ch 74
1 x	EasyFLY Addon
1 x	Crystal Universal RX 35.020 Ch 62
1 x	Snap pin for micro clevis (10 uds)
1 x	45 mm rods + T patellas set for direction control
1 x	90x75 mm standart servo cover
1 x	Ball link M2,5 (10 pcs)
1 x	Ball link M3 (10 pcs)
1 x	Brazo Servo XTorque 52 mm HITEC 25T-6
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	Indoor hinge with servo arm integraded
1 x	Vertical servo holder
1 x	Horns indoor
1 x	Ball link M3 (10 pcs, flat ball)
1 x	30 cm DEANS female connector
1 x	Extension for SensorSwitch 60cm
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	Crimping tool
1 x	Conector JR Servo female (10 pcs)
1 x	Cable set Premium™ MAXI "one4two"
1 x	100m servo "Premium" wire (white/red/blue)
1 x	DPSI OCP Overload protection
1 x	MicroMatch PowerBox
1 x	50m servo "Premium" wire (white/red/blue)
1 x	Extractor piñones 2.3/3.2 mm
1 x	Buy Perforated film 100 cm / 20 m
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
1 x	Cianocrilato MD GEL 454 tube 20g
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	CF tube (L 1000 mm Ø030 mm, Ø26 mm)
2 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm)
1 x	Receptor DUPLEX REX R9 Slim
1 x	DUPLEX R7 REX receiver 2,4GHz
1 x	DUPLEX R6G indoor receiver 2,4GHz
1 x	DUPLEX R6 EX receiver 2,4GHz
1 x	PPS-4D Propeller
1 x	Indoor motor holder
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Pushrod octagone 3/2
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Wheel collar 3.5 mm Ø (4 uds)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Cable tie mounts 4.3 (4 uds)
1 x	UBEC 6A KAVAN
1 x	Avanti S 2.3m Jet WHITE/BLUE & retract (SebArt)
1 x	SkyMaxx 1.550 mm (kit)
1 x	Avanti S 1.8m Jet FREECE TRICOLORI + Landing gear
1 x	DUPLEX R12 EPC receiver 2,4GHz
1 x	90x60 mm standart servo cover
1 x	DUPLEX 2.4EX Central Box 210
1 x	PSC 5
1 x	PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x	SPS 70V 100/200 A
1 x	Short Switch On/Off micro

17,868.66EUR