1 x | Double conector with JR adapter and 200 mm extension |
1 x | CC 05 |
1 x | 4 LiPo XH>EH adapter |
2 x | Circlick securite |
1 x | APM2.6 Power module with 5.3V DC BEC |
2 x | Connector Sub-D 2+5 Female |
1 x | BEC 3A FOXY |
1 x | CM-3 |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | 30 cm BEC cable (female) |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Dean "T" - Futaba Adapter |
1 x | CC 02 |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | 5 LiPo XH>EH adapter |
2 x | DPS Switch JR/JR |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | 2 LiPo XH>EH adapter |
1 x | Cabling for Fox MDM1 wings |
1 x | DYNAMOMETER S-1580 |
2 x | Glases Aspen |
1 x | Glases Nimbus |
1 x | Glases Nimbus "Black" |
2 x | Glases Stratus |
2 x | Glases Flitemaster |
2 x | Silent-blocks DLE 170M |
2 x | Motor DLE 170 M- Paramotors |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Connector Sub-D 2+5 Male |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Female connector for 16 pines AWG |
1 x | FX three-position switched channel, long |
1 x | Female connector for 20 pines AWG |
1 x | Female connector for 10 pines AWG |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | Short Switch On/Off micro |
1 x | SPARK Switch 5.9v |
1 x | Horn 6/20 with M3 Bearing |
1 x | Horn 5/10 with M2 Bearing |
1 x | Horn 6/27 with M3 Bearing |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Horn 6/35 with M3 Bearing |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | EWC6 40 cm wing connector |
2 x | Brass control horn M4 short for wire (10pcs) |
2 x | Male connector for 12 pines AWG |
2 x | Small aluminium horn red (2pcs) |
2 x | Male connector JST SH 1.0mm with 10 cm wire |
2 x | Connector CAN 15 |
1 x | Small aluminium horn gold (2pcs) |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Cable with accesories |
2 x | 6 mm blue aluminium threaded horn with patella |
2 x | Female connector for 6 pines AWG |
1 x | Male connector for 20 pines AWG |
1 x | Horn 20x28,5 mm (2 pcs) |
2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Horn 5/20 with M2 Bearing |
2 x | USB Interface REVOLECTRIX for CellPRO 10s |
3 x | SlowFlyer control horn (3 pcs) |
1 x | 6 mm red aluminium threaded horn with patella |
2 x | EWC3 100 cm wing connector |
2 x | DPSI Ampere battery backer |
1 x | Female connector for 12 pines AWG |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | 20 mm carbon horn |
1 x | SPARK Switch 12v |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Oracover Black 10 m |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Electric rocket starters (6 pcs) |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | 3l Smoke oil |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Adap/Exten for Futaba 12-14C |
2 x | Optical RPM Sensor |
1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
1 x | Switch Cap M (blue) |
1 x | Horn with ball 40x30 |
1 x | JETImodel Addcap 1640 |
1 x | Selfstart electronic switch |
1 x | Glases Ace |
1 x | Ventus 1:4 set of instruments |
1 x | DPSI OCP Overload protection |
1 x | 120x60 mm SLH KOVO wheel |
1 x | 6 mm M3 variable inclined horn |
1 x | Motor DLE 430 cc - Paramotors |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Long adjustable aluminium control horn with bearing 2,8x15 |
1 x | Electronic switch JETI SP06 Opto |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | 5 mm M2 variable horn |
1 x | ED Position Lights wireless (Set of 3) |
2 x | LED wire (rojo - 2pcs) |
1 x | LED blink wire flashing (white - 2pcs) |
1 x | LED wire (green - 2pcs) |
1 x | DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual |
1 x | DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply) |
1 x | OPTOTRONIX Aurora LCU |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Fast attachment for servos (25 pcs) |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
2 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | LED wire (blue - 2pcs) |
1 x | Extra long horn 60x30 |
2 x | Adjustable brass horn threaded M3 |
1 x | Male connector for 10 pines AWG |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | 6 mm M3 variable horn |
1 x | JETImodel SINGLE BEC |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Rudder forward 80x28 "type Kato" |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | PWC4 wing/fuselage connector for 4 servos |
1 x | Extension 6 lipos XH > EH |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Receiver R7008HV comatible FUTABA |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Receiver Futaba R1008SB 8-channel 2.4 GHz FHSS |
1 x | |
1 x | Ant. Cable R606/17/08/14FS L:1500mm |
1 x | DPSI Ampere & Voltage bundle |
1 x | Rudder forward 90x28 "type Kato" |
1 x | KIRA 600-17 |
1 x | Propeller MENZ-S 20x8 |
1 x | Propeller MENZ-S 18x6 |
1 x | Esc KOSMIK 160+ HV COOL |
1 x | Long adjustable aluminium control horn 2,8x24 |
1 x | Screw M3x12 (10 pcs) |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Pan Head Screw M1,6x6 (10 pcs) |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Telemetry interface ALTIS 20 cm |
1 x | Circlik for shaft 3.2 mm (10 pcs) |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | 29x12 prop Super Silence |
1 x | Propeller MASTER 6x4 |
1 x | Horn DUBRO 1/2A |
1 x | DPSI V-Match |
1 x | DPSI Micro MPS |
1 x | DPSI 2001 RV |
1 x | DPSI RV Mini 5 (2008) |
1 x | DPSI RV Mini 6 Magic with Gas-Cap switch |
1 x | Swing 1000 |
1 x | LED blink wire flashing (green - 2pcs) |
1 x | Propeller MENZ-S 16x6 3-Blades |
1 x | Propeller MENZ-S 20x6 |
1 x | Indoor hinge with servo arm integraded |
1 x | KIRA 480-43 5,2:1 |
1 x | Small adjustable control horn with bearing |
1 x | Rudder forward 70x28 "type Kato" |
1 x | KIRA 480-26 5,2:1 |
2 x | LED wire (white - 2pcs) |
1 x | LED blink wire flashing (blue - 2pcs) |
1 x | KIRA 480-31 5,2:1 |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Screw M3x20 (10 pcs) |
1 x | Pan head screw M2x16 PH |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Altimeter Altis NAO |
1 x | Screw M3x16 (10 pcs) |
1 x | Telemetry interface ALTIS 6 cm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Socket Screw M3x9 mm |
1 x | Device Terminal |
1 x | Socket Head Screw M2x5 |
1 x | Telemetry interface ALTIS 12 cm |
1 x | Socket Head Screw M2x10 |
1 x | Altimeter Altis V4 |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Floating M4 washer pad (36 pcs) |
1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
1 x | 12 mm floating pad (49 pcs) |
1 x | Screw M4x30 (10 pcs) |
1 x | 15 mm floating pad (30 pcs) |
1 x | Socket Head Screw M2x12 |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Telemetry interface ALTIS to Futaba |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Screw M2.5x5 (10 pcs) |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Screw M4x12 (10 pcs) |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Screw M2.5x10 (10 pcs) |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
1 x | Screw M2.5x20 (10 pcs) |
1 x | Keypad ALTIS V4 |
1 x | Screw KB 1.4x6 mm (10 pcs) |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Socket Screw M2x3 mm (4 pcs) |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | 10 mm floating pad (72 pcs) |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
1 x | Crystal TX 35.050 Ch 65 |
1 x | Propeller MASTER AIRSCREW 12x8 |
1 x | FIALA 22X8 WOODEN 3-BLADE PROPELLER (GAS) |
1 x | Propeller POWER-PROP 12x8 |
1 x | Crystal TX 35.180 Ch 78 |
1 x | Horn mando long (2 pcs) |
1 x | 12x6 tree blades propeller |
1 x | Small aluminium horn blue (2pcs) |
1 x | Propeller MENZ-S 19x12 |
|
17,262.38EUR |