1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 2 mm male connector (2 pcs) with safety connector
1 x Connectors banna oro 3 mm (M/F)
1 x Conector FUTABA Servo female (10 pcs)
3 x Bag connector 2 mm
2 x Connectors DEANS (T)
1 x Connectors banna oro 3,5 mm (M/F)
1 x Conector JR/Uni Servo male BLUE silicon (10 pcs)
2 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Conector BEC female (10 pcs)
1 x Connector CAN 15
1 x Conector BEC male (10 pcs)
1 x Conector JR/Uni Servo female BLUE silicon (10 pcs)
2 x 2 mm female connector (2 pcs) with safety connector
1 x Connectors DEANS (T) micro
1 x Conector JR Servo male (10 pcs)
1 x Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x Connectors banna gold 5,5 mm (M/F)
1 x Connectors banna oro 4 mm (M/F)
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Connectors banna oro 6,0 mm (M/F)
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x Connectors banna oro 8,0 mm (M/F)
2 x Banna gold connector 2,5 mm (M/F)
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Connectors DEANS 4 pins (1 pair)
1 x Conector FUTABA Servo female BLUE silicon (10 pcs)
2 x 30 cm MULTIPLEX female connector
1 x 30 cm DEANS female connector
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x Connectors banna oro 0,8 mm (M/F)
3 x Red 3m5 mm connector holder
2 x XH LiPo extension lead
1 x Conector XT-30 (macho)
1 x Protector Connector Dean-T (1 pair)
2 x Conector XT-150 6mm (Set: 5 pares)
1 x Protector Connector MPX (1 pair)
1 x Conector MT-60 (pair)
1 x Mounting frame MPX female connector
1 x Conector MR-60 (pareja)
3 x MPX screwable clips (5 pcs)
1 x Servo Connector Brackets (10 pcs)
1 x Wing connector 8pin with pin strip, plug & socket
1 x PIN Connector female (100 pcs)
1 x XT-60 connector (male)
1 x MPX PCB "Gender-Changer (5 pcs)
1 x MPX PCB "6 Pins", 5 pieces
3 x XT60 Connector with Holder Male 2pcs
1 x MR30 connector male
1 x Mounting frame MPX male connector
1 x MPX Support
2 x Soldering PCBs 8pin, 5 pieces
1 x MR30 connector female
2 x Red 4 mm connector holder
2 x Kontronik connector (10 connectors, 5 pairs)
1 x ABS Strip 1.0x3.0x1000 mm
1 x Strip 1,5x1,5x330 mm
1 x Round Rod 6,0x1000 mm
1 x Round Rod 1,5x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x ABS Strip 1.5x4.0x1000 mm
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x Vacuum bag, 1200 mm x 50 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Circlik for shaft 1.2 mm (10 pcs)
1 x Lock washer 3.2 mm (20 pcs)
1 x Circlik for shaft 1.5 mm (10 pcs)
2 x Flat washer 2.7 mm (20 uds)pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
2 x Flat washer 2.2 mm (20 pcs)
1 x Quicklock washer 2.5 mm (10 pcs)
1 x Quicklock washer 4 mm (10 pcs)
1 x Lock washer 2.2 mm (20 pcs)
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Spring lock washer 3.1 mm (20 pcs)
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x Aluminium wide washer M3 blue (4 pcs)
2 x Flat washer 4.3 mm (20 pcs)
1 x Lock washer 4.3 mm (20 pcs)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Lock washer 2.7 mm (20 pcs)
1 x Quicklock washer 3.5 mm (10 pcs)
1 x Spring lock washer 2.1 mm (20 pcs)
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Aluminium wide washer M3 red (4 pcs)
2 x MPX PCB "4 Pins", 5 pieces
1 x MPX Support (2 pcs)
1 x Wing conexion 2 servos Futaba 50 cm
1 x Wing conexion 2 servos JR/Graupner 50 cm
1 x Contacto macho pin conector (10 pcs)
1 x MPX housing with flange (4 pcs)
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x XH male balance (8S) connector (2 pcs)
2 x MPX Sub-D Adaptor
3 x PVC 0,25 qmm servos wire Graupner (5 m)
1 x Support FUEL DOT V3
2 x PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x 30 cm BEC cable (female)
1 x STANDOFF GAS ENGINE MOUNT 38 mm
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Bidule 111 3000 mm
1 x Truck-trailer for gliders 720 x 239 mm
1 x Cabin latch Fox MDM1 4m (pair)
1 x XT-90 connector (pair)
1 x XH male balance (4S) connector (2 pcs)
1 x Connectors MPX black male
1 x Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav
1 x Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Glass fabric 390 g/m² (silane, twill) 100 cm x 20m
1 x Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x Glass fabric 49 g/m² (1,27 x 10 m)
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x PVC grid straight 290x185x0.32 mm
1 x Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m
1 x Peel ply 95 g/m² (plain weave) 100 mm x 100 m
1 x PVC grid diagonal 290x185x0.32 mm
1 x Peel ply 93 g/m² (plain weave) 150 cm x 5m
1 x Panel Honeycom carbon 350x150x3.5mm
1 x Blind nut M6 (4 pcs)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Screw M3x12 (10 pcs)
1 x Nylon Screw M6x40
1 x Xplorer1 anemometro
1 x Squared carbon wing joinner 5x5x220 mm
1 x Nylon Screw M4x20
1 x Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
1 x Screw M4x30 (10 pcs)
1 x 12 mm floating pad (49 pcs)
1 x 15 mm floating pad (30 pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x XH female balance (2S) connector (2 pcs)
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x Vest clothes Hispano Aviación
1 x PVC termo-retract battery 95 mm blue transparent (1 m)
1 x PVC 0,08 qmm Graupner servos wire (5 m)
2 x Silicone 0,25 qmm servos wire Graupner (5 m)
1 x Xoar Electric Beechwood Prop 21x10
1 x Cap Hispano Aviación
1 x Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x PVC termo-retract battery 45 mm transparent orange (1 m)
1 x Red silicone 1,0 qmm wire (50 m)
1 x Silicone 0,14 qmm servos wire Graupner (100 m)
1 x PVC transparent battery termo-retract 195 mm (1 m)
2 x Silicone 0,25 qmm servos wire Graupner (100 m)
1 x PVC transparent battery termo-retract 85 mm (1 m)
1 x PVC red battery termo-retract 68 mm (10 m)
1 x Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x PVC blue transparent battery termo-retract 68 mm (10 m)
1 x PVC 0,14 qmm servos wire Graupner (100 m)
1 x PVC transparent battery termo-retract 70 mm (10 m)
2 x PVC transparent black termo-retract battery 185 mm (1 m)
1 x PVC blue transparent battery termo-retract 95 mm (1 m)
1 x PVC yellow battery termo-retract 69 mm (10 m)
1 x PVC 0,35 qmm servos wire Graupner (100 m)
1 x PVC transparent red battery termo-retract 68 mm (10 m)
2 x Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x PVC termo-retract battery 45 mm black transparent (1 m)
1 x PVC yellow transparent battery termo-retract 69 mm (10 m)
1 x Xoar Electric Beechwood Prop 12x6
1 x Xoar Electric Beechwood Prop 15x8
1 x Xoar Electric Beechwood Prop 20x10
1 x Xoar Electric Beechwood Prop 24x8
1 x HAWK 100 ARF scale 1:4.75 2480 mm - PAINTED AH106
1 x KONDOR 15-92
1 x KIRA 500-30 6,7:1
1 x Adapter FUN 400/480
1 x KIRA 600-20
1 x KIRA 480-26 5,2:1
1 x KIRA 480-34
1 x Grasa 2 ml
1 x Cinta Goldfix 1m
1 x BEC extension JIVE
1 x Motor Mount for Multiplex FunJet
1 x Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x EXTRA 300 78" V3 Orange/Blue
1 x Wing bolts M3 Steel screw Red (2 pcs)
1 x SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x EDGE 540-A 74" (1880 mm)
1 x 3.2 mm Prop Adapter M8
1 x 3 mm Leader (L 100 mm)
1 x FALCON 25X9 CARBON PROPELLER (GAS)
1 x Hexagonal Nut M1,6 (10 pcs)
1 x Threaded insert M5 (10 pcs)
1 x Propeller APC 10x7 Electric
1 x Propeller APC 11x3.8 SF
1 x Propeller APC 11x5 Glow/Gas
1 x Propeller APC 11x6 Glow/Gas
1 x Ø 28 mm fiberglass motor-holder for electric motors
1 x Central support Speed 280
1 x Size "M" motor holder for class 400
1 x Motor Mega AC 16/07/04
1 x Cooler motor type 280
1 x FesEx-Uni8 System
1 x Motor Mega AC 16/15/04 COMBAT
1 x Metalic motor holder for class 550-600
1 x Cables suitable for the motor AC 28/7
1 x Hacker A30-S Radial Set
1 x Interface Jack Adapter IKARUS
1 x PPS-4D Propeller
1 x Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x 2 mm Prop Adapter M6
1 x 15x7 tree blades propeller LEFT
1 x VITAPROP CARBON FOLDING PROP 15x9.5"
1 x FALCON 26X10 CARBON PROPELLER (GAS)
1 x Nut for mounting M5 (4 pcs)
1 x Motor Mega AC 16/15/07
1 x Silicone 0,35 qmm servos wire Futaba (100 m)
1 x Xoar Electric Beechwood Prop 16x7
1 x Battery LiPo GENS 2200 mAh 2S 7.4v 60C (Gens Ace)
1 x Propeller KAVAN 32x12 2-Bl
1 x Propeller APC 16x5.5 MR
1 x Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x Cabel "Y" 30 cm (graupner)
1 x Silicone 0,50 qmm servos wire Futaba (100 m)
1 x Actuador lineal HLS12-100210-7.4v
14,403.20EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies