Inicio » Catálogo » Motores y Turbinas » Eléctricos » Brushless » KAVAN » KAV30.1638C

120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
  Turbinas->
  Eléctricos->
    Brushless->
      Actro
      AXI->
      FOXY/RAY
      Glavak
      Hacker
      Hacker FES System
      JETI
      KAVAN
      Kontronik->
      Mega
      MP Jet
      MULTIPLEX
      MVVS
      O.S.
      Plettemberg
      RIPMAX
      ROI-Import
      Scorpion Motor
      T-Motor
      Top Model CZ
      Typhoon
    Escobillas->
    Accesorios
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

ProgBox PRO LCD Hobbywing
44.90EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Tornillo M3x0,5x20 mm Sokect Head aluminio anodizado azul (4 pcs
1 x	Tornillo M4x0,7x20 mm aluminio anodizado azul (4 pcs)
1 x	Tuerca autoempotrable M8 (10 pcs)
1 x	Arandela conica alumino M4 verde (8 pcs)
2 x	Arandela conica ancha alumino M3 oro (4 pcs)
1 x	Tuerca autoempotrable M6 (4 pcs)
1 x	Círculo autoadhesivo 12 mm (49 pcs)
1 x	Arandela conica ancha alumino M4 Rojo (4 pcs)
1 x	Tornillo M3x0,5x20 mm Sokect Head aluminio anodizado lila (4 pcs
1 x	Arandela conica ancha alumino M4 Azul (4 pcs)
1 x	Tornillo M2x12 mm aluminio (4 pcs)
1 x	Tornillo Servos M4x5/8 aluminio anodizado negro (4 pcs)
1 x	Tuerca autoempotrable M3 (4 pcs)
1 x	Arandela conica ancha alumino M4 Negro (4 pcs)
1 x	Tornillo M4x0,7x20 mm Cabeza Plana alum. anodizado lila (4 pcs)
1 x	Arandela conica ancha alumino M3 azul (4 pcs)
1 x	Tuerca autoblocante M2 aluminio azul (4 pcs)
1 x	Tuerca autoempotrable M6 (4 pcs)
1 x	Tuerca autoempotrable M2 (10 pcs)
1 x	Tornillo M4x0,7x20 mm Cabeza Plana alum. anodizado azul (4 pcs)
1 x	Tornillo M4x0,7x25 mm Cabeza Botón alum. anodizado azul (4 pcs)
1 x	Círculo autoadhesivo 10 mm (72 pcs)
1 x	Tornillo Servos M4x5/8 aluminio anodizado plata (4 pcs)
1 x	Arandela conica alumino M4 rojo (8 pcs)
1 x	Tuerca autoempotrable M5 (4 pcs)
1 x	Tornillo Servos M4x5/8 aluminio anodizado lila (4 pcs)
1 x	Tuerca autoempotrable M4 (4 pcs)
1 x	Arandela conica alumino M3 verde (8 pcs)
1 x	Tornillo Servos M4x5/8 aluminio anodizado rojo (4 pcs)
1 x	Fibra carbono tela 160g/m2 127 cm x 5 m
1 x	Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 22 rollos
1 x	AIREX® M060 lámina (amarilla) 1200x550x4,0 mm (5 pcs)
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Cinta carbono TeXtreme 38 g/m2 IM UD 20mm x 100 m
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 100m
1 x	Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 15 m
1 x	AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (10 pcs)
1 x	ARAMID panel nido de abeja 1300x2600x2 mm
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x	Fibra carbono tela 160g/m2 127 cm x 10 m
1 x	Bolsa vacio 1200 mm x 50 m
1 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 100m
1 x	Adaptador MPX-Dean "T"
1 x	Rótula con rodamiento M2,5 22x5,5
1 x	Rótula metálica M3/3 azul (2 pcs)
1 x	Varilla carbono 0.8 mmx1000 mm
1 x	Varilla carbono 8.0 mmx1000 mm
1 x	Rótula V3 aluminio M2,5 / 5 Diam con base corta (2 pcs)
1 x	Rótula corta M2 con bola/tornillo (6 uds)
1 x	Rótula larga M3 con bola/base, tornillo y tuerca (6 uds)
1 x	Varilla carbono 20 mmx1000 mm
1 x	Varilla carbono 2.0 mmx1000 mm
1 x	APM2,6 Power module con BEC 5,3 V DC
1 x	Bayoneta de carbono 13,4 mm Ø 0,48 mm
1 x	Varilla carbono 1.5 mm x 1000 mm
2 x	Cable carga emisora GRAUPNER
1 x	Rótula 6 mm con bola M3 (10 pcs)
2 x	Rótula M3
2 x	BEC 3A FOXY
1 x	Varilla carbono 0.5 mmx1000 mm
1 x	Rótula metálica M2/2 azul (2 pcs)
1 x	Varilla carbono 1.5 mm x 1000 mm
1 x	Cable BEC 30 cm (macho)
1 x	Rótula M1.6 con tornillo y tuerca (6 uds)
1 x	Rótula con rodamiento M2 22x5,5
1 x	Adaptador Dean "T" - Futaba
2 x	Rótula V1 corta M2/M1,6 3Diam negra (2 pcs)
2 x	Adaptador MPX-EC3 10cm
1 x	Alambre de cobre esmaltado en negro Ø0,2 mm (5 m)
2 x	Cable Futaba voltaje externo para telemetria
1 x	Varilla carbono 14 mmx1000 mm
1 x	Varilla carbono 1.0 mm x 1000 mm
2 x	Rótula con bola M3 (10 pcs)
1 x	Varilla carbono 12 mm x 1000 mm
1 x	Bayoneta de carbono cuadrada 5x5x220 mm
2 x	Rótula M3 RPA's-UAV's
1 x	Varilla carbono 6.0 mmx1000 mm
3 x	Rótula corta M3 con bola/tornillo (6 uds)
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Rótula V3 aluminio M2,5 Diam con base corta (2 pcs)
2 x	Adaptador (GP/KO hasta 4S) para CellPRO 4S
1 x	Cable BEC 30 cm (hembra)
1 x	Rótula larga M3 con bola/tornillo (6 uds)
1 x	Adaptador 5 LiPos XH>EH
1 x	Rótula corta M1.6 con bola/base (6 uds)
1 x	Varilla carbono plana 3.0 x 1.0 x 1000 mm
1 x	Alambre de cobre esmaltado Ø0,2 mm (5 m)
2 x	CC 05
1 x	Adaptador TP/TopFuel - XH 2/3S
1 x	Rotula 6 mm hexagonal con bola M3 (10 pcs)
1 x	Cable carga bateria transmisor Futaba 2x0,5 qmm (50 cm)
1 x	Varilla carbono 5.0 mmx1000 mm
1 x	Rótula con bola plana M3 (10 pcs)
1 x	Rótula larga M3 con bola/base, tornillo y tuerca (2 uds)
1 x	Rótula MAXI con bola/saliente M3 (2 uds)
1 x	Rótula MAXI con bola/tornillo M3 (2 uds)
1 x	Varilla carbono 10 mm x 1000 mm
2 x	Rótula con bola M2,5 (10 pcs)
2 x	Cable "Y" equilibrador 6S, 2x JST-XH / 1x JST-EH
2 x	Cable carga bateria transmisor Multiplex 2x0,5 qmm (50 cm)
1 x	Varilla carbono plana 1000x3.0x0.5 mm
1 x	Varilla carbono plana 1000x3.0x1.0 mm
1 x	Varilla carbono 4.0 mmx1000 mm
2 x	Cable "Y" equilibrador 5S, 2x JST-XH / 1x JST-EH
2 x	Cable carga bateria transmisor Graupner 2x0,5 qmm (50 cm)
1 x	Paramotor BackPack XXS (sin accesorios)
1 x	Arandela conica ancha alumino M3 rojo (4 pcs)
1 x	Arandela conica alumino M3 rojo (8 pcs)
2 x	Rótula V3 aluminio M2,5 5Diam (2 pcs)
1 x	Rótula V2 corta M2,5 5Diam negra (2 pcs)
1 x	Plancha fibra vidrio 350x150x1.0 mm
1 x	Fibra vidrio 163 g/m² 130cmx10m (Interglas 92105, aero, finish
1 x	Peel Ply liso 95 g/m2 20 mm x 100 m
3 x	CM-3
2 x	Rodillo teflon 40 mm x 15 mm Diam.
1 x	Varilla carbono 16 mm x 1000 mm
2 x	Cable "Y" carga 4 mm (2 IN-1 OUT)
2 x	Plancha fibra vidrio 620x540x0,3 mm
1 x	Rodillo teflon 80 mm x 15 mm Diam.
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Plancha carbono 550x350x2.5 mm ECOTECH
1 x	Plancha fibra vidrio 350x150x0.3 mm
1 x	Plancha fibra vidrio 1200x1000x0,2 mm
1 x	Fibra vidrio 160 g/m2 "twill weave" (50 m x 1 m)
1 x	Plancha de goma espuma (310x210x8 mm)
1 x	PET film Mylar® A 350, 50 cm, roll/ 2 m
1 x	Peel Ply liso 64 g/m2 150 cm x 20 m
1 x	Prolongador 5 lipos conector JST/C
1 x	Rótula M3 con tornillo y tuerca(6 uds)
1 x	Multi-adaptador equilibradores JST/C - TP
1 x	Switch electronico SXH HV
1 x	Prolongador macho TP 4/5S
1 x	Rótula M3
1 x	Cable USB para programación HLS
1 x	Alambre cobre esmaltado 3 hilos trenzados rojo/negro/cobre Ø0,2
2 x	Conexion PREMIUM fuselaje/alas para 3 servos SUB-D 160 cm
1 x	Prolongador 5 lipos conector JST - JST/C
1 x	Adaptador 2 LiPos XH>EH
1 x	Rótula con rodamiento M3 22x5,5
1 x	Rótula V3 aluminio M3/5 Diam (2 pcs)
1 x	CC 01
1 x	PowerBox SparkSwitch RS
1 x	CC 03
1 x	Interruptor canal todo-nada 3 posiciones
2 x	Rótula INDUSTRIAL con bola M3 (2 uds)
1 x	Prolongador 2/3 lipos conector JST - JST/C
1 x	Conector AWG Hembra 16 pines
1 x	Cable silicona 4,0 mm2 rojo (1 m)
1 x	Cable silicona 6,0 mm2 rojo (25 m)
1 x	Prolong. Hembra XH 30 cm para 4 elem. cables silicona 0,25 mm2
1 x	Cable silicona 1,5 mm2 rojo (1 m)
1 x	Funda Protectora espiral transparente cables Ø 0,5/50 mm - 25 m
1 x	Cable silicona 0,75 mm2 rojo (1 m)
1 x	Cable silicona 2,5 mm2 rojo (1 m)
1 x	Cable silicona 2,5 mm2 rojo (25 m)
1 x	Cable silicona 0,75 mm2 rojo (25 m)
1 x	Tornillo allen M3x16 (10 pcs)
1 x	Tornillo allen M3x8 (10 pcs)
1 x	Circlick seguridad
1 x	UBEC 6A KAVAN
1 x	Conector alas/fuselaje para 3 pines AWG 20-22
1 x	PSC 6
1 x	Interruptor corto On/Off micro
1 x	Interruptor SWTU2
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	SBEC 40
1 x	Conector Sub-D 2+5 Hembra
1 x	Servo slow down unit (0,7-14,7 sec)
1 x	Rótula V1 larga M2/M1,6 3Diam negra (2 pcs)
1 x	SBEC 30 D
1 x	Conector AWG Hembra 10 pines
1 x	Interruptor OPTO Gas Engine
1 x	Conector AWG Hembra 12 pines
1 x	DPS Interruptor JR/JR
1 x	Prolongador 6 lipos conector XH > EH
1 x	Adaptador USB para elementos Jeti DUPLEX
1 x	Rótula larga M1.6 con bola/base (6 uds)
1 x	Conector alas/fuselaje para 6 pines AWG 20-24 (sin pines)
1 x	Conectores para alas del Fox MDM1
1 x	MAX BEC
1 x	DPSI Ampere battery backer
1 x	Rótula con bola M2 (10 pcs)
1 x	Círculo autoadhesivo para arandelas M3 (36 pcs)
1 x	Helice Carbono 16x13
1 x	Plancha fibra vidrio 350x150x2.0 mm
1 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m
1 x	Conector banana oro 3,5 mm
1 x	AIREX® M060 lámina (amarilla) 1200x550x6,0 mm (5 pcs)
1 x	Fuente alimentacion NT 25 Amp.
1 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x	Helice Carbono 17x13
1 x	Helice Carbono 14x6.5
1 x	Helice Carbono 13x9
1 x	Helice Carbono 12x6
1 x	Helice Carbono 15.5x10
1 x	Set Equipamiento XL
1 x	Helice Carbono 18,5x12
1 x	Helice Carbono 18x19
1 x	Release film 100 cm x 50 m
1 x	Plancha fibra vidrio 350x150x2.5 mm
1 x	Helice Carbono 11x8
1 x	Helice Carbono 15x13 Slim
1 x	Plancha fibra vidrio 620x540x3,2 mm
1 x	Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x	Helice Carbono 18x17
1 x	Helice Carbono 12.5x6.5
1 x	EDGE 540 V3 (Superlite) ORANGE

6,976.62EUR