Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Emisora Spektrum NX10 10ch (solo Tx)
619.92EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Strip ABS 2.0x3.0x1000 mm
2 x	ABS Strip 1.0x4.0x1000 mm
2 x	Strip ABS 2.0x5.0x1000 mm
2 x	Round Rod 2,0x1000 mm
2 x	Round Rod 4,0x1000 mm
2 x	Round Rod 5,0x1000 mm
2 x	Round Rod 1,25x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
2 x	ABS Strip 1.5x2.0x1000 mm
2 x	Round Rod 6,0x1000 mm
2 x	Round Rod 3,0x1000 mm
4 x	Strip ABS 2.0x10.0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
2 x	ABS Strip 1.5x8.0x1000 mm
1 x	Strip 2,5x1,25x330 mm
2 x	ABS Strip 1.5x6.0x1000 mm
3 x	Round Rod 1,0x1000 mm
3 x	ABS Strip 1.0x2.0x1000 mm
2 x	ABS I Strip 10x5x1000 mm
2 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
2 x	Straightened threaded rod M2-1m
3 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
3 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
2 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	L-Connector 4.0 mm x 1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	Profile ABS Square 2 x 1000 mm
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Interface Realflight Simulator
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	ABS tube 8.0x7.0x1000 mm
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Sun Cover PC 21 XXL (JMB Jets)
2 x	ABS Strip 1.5x3.0x1000 mm
1 x	Strip 2,0x2,0x330 mm
2 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
3 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
2 x	Straightened rod Ø 3.0 mm x 1000 mm
2 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Brass rod Ø 0.5 mm x 1000 mm
2 x	Straightened rod Ø 1.0 mm x 1000 mm
2 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
3 x	Aluminium rod Ø 4.0 mm x 3000 mm
2 x	Straightened rod Ø 0.8 mm x 1000 mm
2 x	Brass rod Ø 0.8 mm x 1000 mm
2 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	PowerPack 2.5X2 PRO
1 x	Battery RX JETI LiIon RB 5200 7.2v
1 x	Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm
1 x	10-15mm Servo Arm
1 x	SERVO DES 707 BB MG
1 x	Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x	XTorque CFK Servohebel 38
1 x	LiPo Storage Box Standard 1 Type 1
2 x	Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
2 x	Universal batery Tester
2 x	Cable silicona female batt. receptor 30 cm (Futaba)
2 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Extension silicon 30 cm female (Futaba)
1 x	Extension 30 cm (Futaba)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Extension 15 cm (Futaba)
1 x	SIMtransmitter 6 Mode 2
1 x	Interface Jack Adapter IKARUS
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Premium servo extension 50cm
1 x	Futaba male 40 cm extension
1 x	Ferrita 17x10x6.5 mm
1 x	Screw M3x16 (10 pcs)
1 x	Tapping Screw M2.9x9.5 (10 pcs)
1 x	Titanium M3x0,5x8 mm Flat Head screw (4 pcs)
1 x	Screw M4x12 (10 pcs)
1 x	Tornillo cabeza boton M4x12 mm (5 pcs)
1 x	200 mm extensión servo HITEC/JR
1 x	Extension silicon 100 cm (Graupner)
1 x	Extension silicon 100 cm (Futaba)
1 x	Futaba Female 40 cm extension
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Extension 7.5 cm
1 x	20-25mm Servo Arm
1 x	Futaba 52 mm servo arm
1 x	Servo Mount M (blue)
1 x	XTorque CFK Servohebel 38 HITEC 25T
1 x	Futaba 24/30 mm servo pull-pull double arm with ball link
3 x	Servo arm with 6 mm hole to FEMA 9800A
1 x	Gold aluminium servo arm V2-JR 1,0" inch M3
1 x	46 mm Futaba servo arm tandem with ball link
1 x	Rudder 2_Tray 3.5~4 inch
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Propeller Pleg CAM Carbon 11x7
1 x	Propeller Pleg CAM Carbon 10x4
1 x	Round Rod 2,5x1000 mm
1 x	Propeller Pleg CAM-Prop 8x6
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Round Rod 1,5x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Strip 1,5x1,5x330 mm
1 x	Propeller 8x4,3 SlowFlyer
1 x	Propeller 3x3
1 x	Propeller 9x7 SlowFlyer
1 x	Propeller Pleg CAM Carbon 14x12
1 x	Propeller Pleg CAM Carbon 13x11
1 x	19.5x13 Falcon electric 3-Blade carbon prop (54 g)
1 x	Propeller Pleg CAM Carbon 12x6.5
1 x	Propeller Pleg CAM Carbon 10.5x6
1 x	Propeller Pleg CAM Carbon 11x4
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x	Extension silicon 35 cm male (Futaba)
1 x	Treaded hexagonal socket insert M3 Br (4 pcs)
1 x	Blind nut M8 (10 pcs)
1 x	Blind nut M3 (4 pcs)
1 x	Blind nut M6 (4 pcs)
1 x	Nut for mounting M2 (4 pcs)
1 x	Vertical servo holder
1 x	Hitec 25 mm servo arm with M3 ball link
1 x	Blue aluminium servo arm V2-Hitec 1,25 inch M3
1 x	Servo inverter
1 x	Tester LiPo/LiIon/LiMn/LiFe
1 x	Propeller Pleg CAM-Prop 10x6 + Spinner
1 x	Extension silicon 30 cm male (Graupner)
1 x	Extension silicon 50 cm (Futaba)
1 x	Lock nut aluminium M2.5 (4 pcs)
1 x	Nut for mounting M2,5 (4 pcs)
1 x	Nut for mounting M4 (4 pcs)
1 x	Nut for mounting M3 (10 pcs)
1 x	Hexagonal Nut M4 (10 pcs)
1 x	LA500 tail empennage
1 x	Blue Aluminium lock nut M4 (4 pcs)
1 x	Hexagonal Nut M3 (10 pcs)
1 x	Cabel "Y" 15 cm
1 x	Hexagonal Nut M1,6 (10 pcs)
1 x	Lock nut aluminium M3 (4 pcs)
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Cabel "Y" 30 cm (graupner)
1 x	Nut for mounting M3 (4 pcs)
1 x	Threaded insert M6 (10 pcs)
1 x	Hexagonal Nut M4 (20 pcs)
1 x	Lock nut M2.5 (10 pcs)
1 x	Lock nut M5 (10 pcs)
1 x	Lock nut M3 (10 pcs)
1 x	Blue Aluminium lock nut M2 (4 pcs)
1 x	Hexagonal Nut M1 (10 pcs)
1 x	Blind nut M6 (4 pcs)
1 x	Threaded insert M4 (4 pcs)
1 x	Blind nut M5 (4 pcs)
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	GameCommander USB Universal
1 x	54 mm Futaba servo arm tandem with ball link
1 x	Gold aluminium servo arm V2-JR 1,5" inch M3
1 x	HITEC 20 mm servo arm with ball link
1 x	Futaba 54 mm servo arm with ball link
1 x	Red aluminium servo arm V2-Futaba 1,25" inch M3
1 x	Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x	Futaba 38 mm servo arm
1 x	Blue aluminium double servo arm HITEC 40 mm M3 F3A
1 x	Laminating brush 10 mm, pack/ 50 pcs
1 x	Latex Gloves GRIP, size L, box/ 100 pcs
1 x	MEKP Harderner 100 g
1 x	Release film 100 cm x 50 m
1 x	Motor mount VANQUIST 48" F3A
1 x	Prop Shaft Adapter 5 mm "long"
1 x	Threaded coupler M2 (10 uds)
1 x	Red aluminium servo arm V2-Futaba 17 mm iM2
1 x	Hitec 20 mm servo arm
1 x	Blue aluminium servo arm V2-Hitec 1,0 inch M3
1 x	Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue)

2,770.87EUR