1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Big-Malibu XL Roof box with surfboard rack GREY
1 x KIRA 600-30 6,7:1
1 x Shaft for A60-L (140mm)
1 x Motor holder for AC 28/7
1 x Silent-blocks DLE 170M
2 x Carbon fiber rod 2.5 mmx1000 mm
2 x 6,4x1000 mm 2:1 blue termoretract tube
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
2 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
2 x Carbon fiber rod 5.0 mmx1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Slave-cable USB Easy Sim
1 x Interface Realflight Simulator
1 x Carbon fiber rod 3.0 mm x 1000 mm
3 x Straightened rod Ø 0.5 mm x 1000 mm
2 x Horn mando small (2 pcs)
1 x Universal Colour Paste deep black 250 g
2 x 1,2x1000 mm 2:1 black termoretract tube
3 x 20 mm carbon horn
2 x 4,8x1000 mm 2:1 black termoretract tube
1 x Medium pin type hinge (12 uds)
2 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x GameCommander USB Universal
2 x Horn DU-BRO 1/2 (2 pcs)
1 x 105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x 6,4x1000 mm 2:1 green termoretract tube
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Spray adhesive AEROFIX 2
1 x 6 mm aluminium horn with patella
1 x Stickers-digit for marking
1 x 165 mm PVC transparent battery termo-retract 165 mm (10 m)
2 x Pin hinge 34x16 mm (10 uds)
2 x Horn 20x28,5 mm (2 pcs)
1 x Glases Nimbus
1 x Spray YELLOW Inca Lexan 150ml
1 x Gates hinge 30x16 mm (2 pcs)
2 x 6 mm red aluminium threaded horn with patella
2 x Carbon fiber flat 1000x3.0x1.0 mm
2 x 12.7 mm 2:1 black termoretract tube
2 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
2 x Glases Ace
1 x Horn 13,5x16 mm (2 pcs)
1 x Monokote PLATINO metalizado (1.8x0.65m)
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Horn 5/20 with M2 Bearing
1 x 3,2x1000 mm 2:1 red termoretract tube
1 x Carbon fiber rod 8.0 mmx1000 mm
2 x Horn micro type4 Ø 0,5 (2 pcs)
1 x Release wax 250ml
2 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Carbon fiber rod 0.5 mmx1000 mm
2 x Angle measurer
1 x Cable tie mounts 4.3 (4 uds)
1 x Cabin latch Fox MDM1 4m (pair)
1 x Black large kwik link (10 pcs)
1 x 10m servo "Premium" wire (white/red/blue)
1 x Field folding model stand
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Allen wheel collar M4x6
1 x JR silicone servo wire 0,35 qmm / 5m
2 x Truck-trailer for gliders 720 x 285 mm
1 x Combo AM480 T-Motor 650 Kv
1 x Altimeter Altis NAO
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x PVC yellow battery termo-retract 69 mm (10 m)
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x ULTIMATUM 2.0 m red/black
1 x PVC transparent red battery termo-retract 68 mm (10 m)
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Solarfilm Lite blue transp. 5m
2 x Brass rod Ø 0.5 mm x 1000 mm
2 x Carbon fiber rod 6.0 mmx1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Ferrita con funda
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x Aluminium tube with fibreglass case ø35x1.5mm, 500mm
2 x PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
2 x Carbon fiber rod 10 mm x 1000 mm
1 x SIG Coverall 1.2x4.5 m
2 x Horn 16,5x20 mm (2 pcs)
1 x Universal Colour Paste deep black 50 g
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Control horn long w/ball
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x 5 mm M2 variable inclined horn
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x Horn 5/10 with M2 Bearing
1 x Gear set HITEC HS-55
1 x Fully Threaded Steel Rod M2,5 (2 uds)
2 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x F4E Phantom Scale 1:7
1 x Electric Landing Gear ODYSSEY
1 x Servo MKS HV6120H
1 x Electric Landing Gear ASPIRE
1 x XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell
1 x Protective Cover for wires Ø 10 mm 1000 mm
1 x PVC 0,08 qmm Futaba servos wire (5 m)
1 x Silicone red 1,5 qmm wire ( 1 m)
1 x Fiberglass heat shield Ø 4 mm 1000 mm
1 x Silicone black 0,75 qmm cable ( 1 m)
1 x 6 mm Quick clamp_S (10 pcs)
1 x Silicone red 2,5 qmm wire ( 1 m)
1 x 1 m servo "Premium" wire (white/red/blue)
1 x Propeller POWER-PROP 13x10
1 x Dumper propeller 6/8 mm
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x Adjustable brass horn threaded M3
1 x Brass control horn M2 short for wire (2 pcs)
2 x Cable with accesories
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x Gear set HITEC HS-85
1 x Brass control horn M4 short for wire (10pcs)
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x Servo HITEC D-955 TW Titanium
1 x Servo HITEC HS-45 HB, servo box
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x 
1 x Horn 6/27 with M3 Bearing
1 x Gear set HITEC HS-81
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x Glases Moritz
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x PARTALL® Hi-Temp Wax, 340 g
2 x Fast'n EZ-CA-Hinge (12 uds)
1 x 6 mm M3 variable inclined horn
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Flap hinge (6 pcs)
2 x Flap hinge 33x9 mm (6 pcs)
1 x HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program
1 x Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
2 x Brass control horn M3 short for wire (2 pcs)
1 x Glases Innovation Plus
1 x Glases Stratus
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Horn for flap control (1 pcs)
1 x Spannlack 1000 ml
1 x Long pinned hinge (6 uds)
1 x RH long aluminium horn (2pcs)
1 x LH long aluminium horn L31xH30 (2pcs)
1 x Extra long horn 60x30
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Brass control horn M2 large for wire (2pcs)
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x 18 mm reinforced hinge
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Servo MKS HBL599 SL
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Jet Pipe for ASPIRE 2m JMF
1 x Servo MKS HV 777A+
1 x HAWKER HUNTER 1:5,8, Electric retract landing gear
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x HV6150 Digital Servo
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x HAWKER HUNTER 1:5,8 (1.770mm)
1 x ASPIRE Blue ARF 2.000 mm
1 x Servo Metal Horn 15.5 mm MKS
2 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x F9F COUGAR Grey ARF 1.562 mm
1 x 2,4x1000 mm 2:1 black termoretract tube
1 x Servo BLS-M55B 61.2kg
1 x PVC termo-retract battery 45 mm transparent orange (1 m)
1 x PVC termo-retract battery 45 mm black transparent (1 m)
1 x 2,4x1000 mm 2:1 green termoretract tube
1 x Ply-Span 450x600/13g Orange
1 x Servo JETI DSHV 3D13T (13 Kg)
1 x 6,4x1000 mm 2:1 red termoretract tube
1 x 12,7x1000 mm 2:1 green termoretract tube
1 x T-shape holder metal LAMA
1 x Landing gear retract neumatic (Jet Legend)
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x Silicone red 0,75 qmm wire ( 1 m)
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x Protective Cover for wires Ø 15 mm 1000 mm
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell
1 x Fiberglass heat shield Ø 8 mm 1000 mm
1 x PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x Silicone black 1,5 qmm wire ( 1 m)
1 x Silicone red 4,0 qmm wire ( 1 m)
1 x Protective Cover for wires Ø 3 mm 1000 mm
1 x Silicone black 4,0 qmm wire ( 1 m)
1 x Silicone black 1,0 qmm wire ( 1 m)
1 x Cable Cargador FUTABA
1 x PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x 5 line servos wire black (1 m)
1 x Silicone black 0,5 qmm wire ( 1 m)
1 x Silicone red 0,5 qmm wire ( 1 m)
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x 10 mm Quick clamp_L (6 pcs)
1 x Propeller electric carbon 7x7
1 x Propeller POWER-PROP 11x8
1 x Propeller POWER-PROP 10x7 Izda
1 x Propeller POWER-PROP 10x7
1 x IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x Servo Controller Fibra optica
1 x 9x4.7 * 22x12 carbon propeller
1 x Program 5v SIO RS 232
1 x Coversion set HIROBO EX/EAGLE elektro
1 x SERVO DES 588 BB MG
1 x Carbon blade 3D 230 mm
1 x 1,2x1000 mm 2:1 red termoretract tube
1 x Protective Cover for wires Ø 20 mm 1000 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Shaft sleeve LAMA
1 x Keypad ALTIS V4
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Telemetry interface ALTIS 20 cm
1 x Altimeter Altis V4
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x ULTIMATUM 2.0 m white
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x GPS Altis
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Telemetry interface ALTIS 12 cm
21,595.25EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies