Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Transmitter FUTABA T26SZ + R7214SB
1,079.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	UHU hart 35 g
3 x	FOAM - CURE™ (24g)
1 x	Extractor piñones 2.3/3.2 mm
3 x	Heat-conducting adhesive (2x2ml), WLK DK 4
3 x	Pegamento Pu R 50g polyuretano
2 x	20 mm carbon horn
1 x	Horn mando small (2 pcs)
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Horn for flap control (1 pcs)
1 x	Cable control set
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Brass control horn M2 large for wire (2pcs)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
2 x	Horn 5/20 with M2 Bearing
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	6 mm M3 variable inclined horn
1 x	Control horn long w/ball
1 x	6 mm aluminium horn with patella
3 x	Oratex Natural White 2m
2 x	Ply-Span 450x600/13g White
1 x	Oracover Orange 2 m
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Oracover Green10 m
1 x	Oracover Red 2 m
1 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	Monokote BLUE metalizado (1.8x0.65m)
2 x	Oratex White 2m
1 x	MYLAR film A350 (1000x500 mm)
1 x	Silent-blocks DLE 170M
1 x	Big Crow DLE-170M
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	Para-RC Trike "RC-Bullix"
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	1/4 Pilot "Heidi"
1 x	1/12 Pilot "Tom"
1 x	AXI 2204 Multicopter
2 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
2 x	Motor brushless 1806 - 2300 Kv Cuadracopter
1 x	Heat sink for Optotronix LEDs
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	DPSI LR-S (with push buttons)
1 x	OPTOTRONIX Aurora LCU
1 x	EWC3 40 cm wing connector
1 x	Small control horn with bearing (2 pcs)
1 x	Small aluminium horn blue (2pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Catalyst RESOLTECH 3357-T (0.45 Kg) Suitable for adhesive 3350/1
1 x	Indoor hinge with servo arm integraded
2 x	Medium extra-strong control horn with bearing 2,8x24
1 x	Epoxy MID-CURE™ 15 min (130g)
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Epoxy SLOW-CURE™ 30 min (260g)
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	Horns indoor
2 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
3 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x	Suction funnel for carburetor 90D-M (red)
2 x	Suction funnel for carburetor DA70- MVVW 190cc (red)
1 x	Walbro carburetor for MVVS 26/30/35/40 cc
1 x	Ply-Span 450x600/13g Blue
1 x	Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x	Short extra-strong control horn with bearing 2,8x15
1 x	PVC termo-retract battery 45 mm black transparent (1 m)
2 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x	PVC blue transparent battery termo-retract 95 mm (1 m)
1 x	PVC transparent black termo-retract battery 185 mm (1 m)
1 x	Long horn 50x26
1 x	Gear for MICRO BB
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	Z type of cable coupler Ø 1 (2 uds)
1 x	Threaded coupler M2 (10 uds)
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	Micro control horn T2 Ø 1
2 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Oracover Black 10 m
1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	SlowFlyer control horn (3 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
1 x	Oracover CARBON Metalic 1 m
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	ORACOVER Ferrari red (2 m)
1 x	2,4x1000 mm 2:1 green termoretract tube
1 x	Servo Dymond D 37 Eco
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	FA27.2×8.9 Prop-2PCS/PAIR
1 x	1804 2400KV Brushless Motor Qav 250 mini
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	Motor 2212 (1000KV) Quadcopter F450
1 x	Combo 4 pcs AXI 2204 Multicopter
1 x	T-Motor U7-V2.0 Kv420
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	2,0x50 mm allen screwdriver
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	Propeller hub spacer 8/5.5
1 x	Futaba 50/60 mm servo pull-pull double arm with ball link
1 x	Short adjustable control horn 3x24
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x	Horn mando long (2 pcs)
1 x	Long extra-strong control horn with bearing 2,8x34
1 x	Long adjustable aluminium control horn 2,8x24
2 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	3,2x1000 mm 2:1 black termoretract tube
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	12.7 mm 2:1 black termoretract tube
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	30 cm BEC cable (male)
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	DA 85 / DA 100 / DA 100 L carburetor
1 x	1,6x1000 mm 2:1 red termoretract tube
1 x	Suction funnel for carburetor WALBRO 20-80cc (red)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	PVC termo-retract battery 45 mm transparent orange (1 m)
1 x	Reed valve for DA 50-R
1 x	SCHARNHORST Battleship 1:200
1 x	Tirpiz Battleship 1:200
1 x	SCHARNHORST accessories
2 x	Oracover Yellow CADMIO 2 m
1 x	Brazo Servo XTorque 52 mm HITEC 25T-6
1 x	SIG Coverall 1.2x4.5 m
1 x	Ball link M3 (10 pcs, flat ball)
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x	SIG Coverall 1.2x0.9 m
1 x	6 mm M3 variable horn
1 x	Hitec 25 mm servo arm with ball link
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	PVC termo-retract battery 95 mm blue transparent (1 m)

6,412.99EUR