Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Emisora Spektrum NX10 10ch (solo Tx)
619.92EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Strip 1,5x1,5x330 mm
3 x	ABS Strip 1.0x5.0x1000 mm
2 x	Strip ABS 2.0x5.0x1000 mm
2 x	ABS Strip 1.5x2.0x1000 mm
2 x	ABS Strip 1.0x4.0x1000 mm
1 x	Round Rod 1,0x1000 mm
2 x	Round Rod 4,0x1000 mm
1 x	ABS I Strip 10x5x1000 mm
3 x	Actuator Electric 25 mm
1 x	Round Rod 5,0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
2 x	ABS Strip 1.5x4.0x1000 mm
2 x	ABS Strip 1.0x3.0x1000 mm
2 x	Round Rod 6,0x1000 mm
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
3 x	ABS Strip 1.0x2.0x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
2 x	Strip ABS 2.0x8.0x1000 mm
2 x	Round Rod 2,5x1000 mm
2 x	Strip ABS 2.0x3.0x1000 mm
1 x	Round Rod 2,0x1000 mm
2 x	Strip 2,0x2,0x330 mm
1 x	Round Rod 1,5x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
2 x	Beech dowels 4.0 x 1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	BALSA triangular 6x6x1000 mm
2 x	Screwdriver for Hexagon 1,27mm
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Ventus 1:4 set of instruments
2 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Hot Glue Stick GREEN
1 x	Vacuum pump P1-N
1 x	Crimping tool
1 x	Z Bender - S Type Tool
1 x	Hexagonal ball head 2.0 x 50 mm
2 x
2 x	Digital scale up to 40 kg
1 x	Cut tube
3 x	Screwdriver for Torx® TX8
1 x	Screwdriver for Hexagon 1,5mm
1 x	Z Bender - S Type Tool
1 x	Screwdriver for Torx® TX6
1 x	3,0x60 mm allen screwdriver
1 x	Hot Glue Stick BLACK
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	2,0x50 mm allen screwdriver
1 x	Ball Link Plier
1 x	Vacuum pump 12 CFM
1 x	1/6 Pilot "Buddy"
1 x	Ball link M3 (10 pcs, flat ball)
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Smoke set "S"
1 x	Small Crow DLE-170M
1 x	30 cm BEC cable (female)
1 x	1/4 Pilot "Mike"
1 x	Solvent Plasti Dip 1000 ml
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Birch plywood plate 600x300x1.2 mm
1 x	Tx JETI Duplex DC-24 II Carbon Line Gray
1 x	DUPLEX 2.4EX Satellite receiver Rsat 2
1 x	DUPLEX 2.4EX Expander E4
1 x	Bag JETI Duplex
1 x	Variable Flow Smoke Pump System
2 x	Secraft Fuel system v2, red color
2 x	Strip ABS 2.0x10.0x1000 mm
2 x	Strip 2,5x1,25x330 mm
1 x	Tornillo cabeza boton M4x12 mm (5 pcs)
1 x	Spring pin Ø 2 x 6 mm (10 pcs)
1 x	Titanium M3x0,5x12 mm Flat Head screw (4 pcs)
1 x	Socket Head Screw M2x5
1 x	Ferrita con funda
2 x	EasyFLY Addon
1 x	Opale Rucksack
1 x	40 mm air cylinder
1 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x	Heat Seal Iron
1 x	Schul-Malpinsel Gr.5
1 x
1 x	Starter Sullivan-STAR 601
1 x	Boxed KIT OF 7 Rotary Burrs FINE
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	Black tray 2,4EX DC-16/14/24 black
1 x	Harness for transmitter JETI DUPLEX
1 x	Transmitter JETI Duplex DS-24 EX Carbon Line Dark RED Multimode
1 x	Dremel 3000 130W
1 x	switch 1-Spring-DOWN 3-position DS Tx DUPLEX 2,4EX
1 x	DUPLEX 2,4EX Brackets for Transmitter DC/DS
1 x	Transmitter Balancer Futaba T-10CG
1 x	DUPLEX 2.4EX Expander E2
1 x	Switch Cap M (red)
1 x	Emisora JETI Duplex DS-12 EX Special Edition "Carbon Purple"
2 x	Caps multicolor Switch JETI
1 x	Support hands Issuer PROFI TX
1 x	Mounting Stickswitch
1 x	Transmitter SPEKTRUM DX-9 (Only TX)
1 x	AddCAP 10AS capacitors
1 x	JETI transmitter DC-14 II Red Multimode
1 x	Switch for DC: Long 3 Position
1 x	DUPLEX 2.4EX MU 3 Sensor
1 x	Transmitter JETI Duplex DS-12 EX Multimod YELLOW
2 x	PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH
1 x	Propeller POWER-PROP 11x9
1 x	Titanium M3x0,5x8 mm Flat Head screw (4 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Socket Head Screw M2x8
1 x	Propeller electric carbon 9.5x5
1 x	Porpeller HUNTER 480
1 x	Propeller POWER-PROP 14x12
1 x	Propeller POWER-PROP 15x10
1 x	Propeller POWER-PROP 11x8
1 x	Propeller POWER-PROP 15x8
1 x	HAWK 100 ARF scale 1:4.75 2480 mm - PAINTED AH106
1 x	PropCover 16-20" (2 pcs)
1 x	Propeller MEJZLIK 22x10 Electric light (36 g)
1 x	Propeller MEJZLIK 20x10 Electric light (36 g)
1 x	F-16 Scale 1/6 G3 Airex Deco: AF 916F
1 x	Propeller MEJZLIK 9,5x3 SF Carbon Indoor
1 x	Actuator Electric 25 mm HIGH TORQUE
1 x	Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox)
1 x	Round Rod 3,0x1000 mm
1 x	Anntena Panel 5,8 GHz - 14 dBi
1 x	Coupling bush 5 - 5 mm
1 x	PROXXON - SAW BLADE DIAMOND OZI/E
1 x	Heli digital angle measurer
1 x	Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x	28 mm tailwheel unit
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Foam plastic plates (310x210x8 mm)
1 x	40 mm 1/4" Race propeller (rigth hydropropeller)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Contest-S-Pult-Carbon mc-20/mc-24
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Decorative caps, multicoloured, short
1 x	GLOW 5C + accesories
1 x	Crystal Universal RX 35.140 Ch 74
1 x	Slave-cable USB Easy Sim
1 x	GameCommander USB Universal
1 x	Crystal Universal RX 35.130 Ch 73
1 x	Crystal Universal RX 35.020 Ch 62
1 x	Servo NARO Max Std
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
2 x	Propeller POWER-PROP 12x9
1 x	Propeller POWER-PROP 14x8
1 x	Extra Hard Titanium Herxagon Screwdrivers
1 x	Precision wrench L100 mm
1 x	Llave dinamomterica 74 Z 0 0 21
1 x	50cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x	3-blades 30x12 carbon prop Super Silence
1 x	PowerFuel RX V2 Fuel Pump
1 x	3-blades 16x10 carbon prop Super Silence
1 x	3-blades 20x10 carbon prop Super Silence
1 x	JM electric Pump
1 x	10cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x	27x10 prop Super Silence
1 x	100g Flux Paste for Silver Solder
1 x	KAVAN Hand crank fuel pump
2 x	PowerBox Smokepump
1 x	3-blades 24x12 carbon prop Super Silence
1 x	15 cm PTFE-tubing for 25 mm tubes
1 x	Micro Crystal RX 35.120 Ch 72
1 x	Interface Jack Adapter IKARUS
1 x	Indoor Brushed motor kit
1 x	IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x	Crystal Universal TX 35.140 Ch 74
1 x	Crystal Universal RX 35.120 Ch 72
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Shaft for A60-L V4
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Axi for motor A40-L Motor 8-Pole-Electric Turbine
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Backmountset complete A40
2 x	switch long 3-position DC Tx DUPLEX 2,4EX
2 x	Thixotropic agent tin/ 15 g (approx. 350ml)
2 x	Receiver FrSKY Archer R8pro 2,4 Ghz
1 x	Switch for DS: Long 3 Position
1 x	DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS
1 x	BD-5 Pro ARF
1 x	Propeller POWER-PROP 12x8
1 x	Propeller POWER-PROP 13x9 Izda
1 x	Propeller POWER-PROP 10x7

22,127.55EUR