Top » Catalog » Sailplanes » Electric » TM020100T

398.00EUR

Albatros red/white (Top Model)
[TM020100T]

The Albatros is one of the most beautiful combinations of classic design and modern technology. The nostalgic shape is perfectly blended with modern building techniques to create an electric sailplane that performs as well as it looks. The white gel-coated fiberglass fuselage combined with classic balsa/ply D-tube wing and carbon/balsa built up tail parts come together to make the Albatros a strong and light model. Do not be fooled by the its retro looks. This model was designed and built to be a 21st century favorite. With its flap equipped, 3 piece wing and full flying elevator the Albatros is one of the most impressive models that we have seen in quite some time. Each part is carefully handcrafted with meticulous attention to every detail. As soon as you open the box, you will find the Top Model build quality that we have come to expect.

Virtually perfect, extremely elegant combination of classic design and modern technology.

The fuselage is reinforced with carbon!

The model is designed and manufactured in Czech Republic. Spare parts are in stock.

The kit contains:
- Elegant gel-coated white fiberglass fuselage and canopy.
- Three-pieces wing with ailerons and oversized flaps.
- Removeable tail surfaces with carbon spar and leading edge.
- Rear carbon sub spar for added wing strength.
- Expertly covered with Oracover.
- Includes all necessary hardware.
- Virtually perfect, extremely clean and well made.
- Complete assembly manual with step by step illustrations.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Propeller Pleg CAM Carbon 12.5x7.5 temporarily out of stock	Spinner propeller pleg. 40 mm / 5,0 mm temporarily out of stock	Gracia (Top Model) temporarily out of stock
MPX Sub-D Adaptor temporarily out of stock

Quick Find

Shopping Cart

1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Gates hinge
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	CC 01
1 x	Adapter lead MPX/XT60
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
3 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
2 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
2 x	Small pinned hinge (12 uds)
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	30 cm BEC cable (male)
1 x	5 LiPo XH>EH adapter
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	15 mm reinforced hinge
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
2 x	Long pinned hinge (12 uds)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	CM-3
1 x	Profile ABS half cane 2.0x1000 mm
1 x	Nylon hinge for flaps 33x9 (2 pcs)
2 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
2 x	3 LiPo XH>EH adapter
2 x	Large flex hinge (12 uds)
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	U Profile ABS 1,0x2,0x1000 mm
2 x	USB HLS prog. interface
2 x	BEC 3A FOXY
1 x	L-Connector 1.5 mm x 1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Circlick securite
1 x	Adapter lead MPX/EC3
1 x	Profile ABS half cane 2.5x1000 mm
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	18 mm reinforced hinge
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Miniature brass strap hinge, 1 m
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	Flap hinge (6 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Profile ABS Square 2 x 1000 mm
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	CC 02
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	MPX-Dean "T" Adapter
1 x	ABS angle 5,0x5,0x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
2 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	CC 03
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	4 LiPo XH>EH adapter
2 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	2 LiPo XH>EH adapter
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Dean "T" - Futaba Adapter
1 x	TrainerCord (master-learner)
2 x	GameCommander USB Universal
3 x	Simulador RealFlight RF-9.5 S (sin emisora)
2 x	Slave-cable USB Easy Sim
1 x	Interface Jack Adapter IKARUS
1 x	Ferrita 27x14x7 mm
2 x	Round Rod 2,5x1000 mm
3 x	Strip 1,5x1,5x330 mm
2 x	Round Rod 3,0x1000 mm
3 x	Strip 3,5x1,75x330 mm
1 x	Horn 5/20 with M2 Bearing
1 x	Horn 6/20 with M3 Bearing
1 x	Horn with ball 40x30
1 x	Cable with accesories
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Cable control set
1 x	Extra long horn 60x30
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Control horn long w/ball
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	6 mm red aluminium threaded horn with patella
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Horn 6/27 with M3 Bearing
1 x	5 mm M2 variable horn
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Brass control horn M2 long for wire (10pcs)
1 x	Horn mando small (2 pcs)
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	6 mm M3 variable horn
1 x	5 mm M2 variable inclined horn
1 x	Horn 5/10 with M2 Bearing
1 x	Horn 6/35 with M3 Bearing
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	140 mm rods set for direction control
1 x	Extension silicon 10 cm (Graupner)
1 x	Motor DLE 170 M- Paramotors
1 x	Cable set PREMIUM , fuselage/wing one4one
1 x	10m servo "Premium" wire (white/red/blue)
1 x	Oracover CHROME 2m
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
2 x	Profile ABS Square 4 x 1000 mm
1 x	Support Flush MPX Conector (6 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	EWC6 40 cm wing connector
2 x	Long Switch On/Off micro
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
2 x	EWC3 40 cm wing connector
1 x	Extension 2/3 lipos JST/C
2 x	Magnetic Interruptor MULTIPLEX
2 x	Female connector JST SH 1.0mm with 10 cm wire
2 x	USB interface ALTIS
1 x	Pin hinge 26x11 mm (10 uds)
2 x	Male Prolonger TP 4/5S
1 x	Female connector for 10 pines AWG
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Profile ABS half cane 3x1000 mm
2 x	PSC 6
1 x	Profile ABS triangular 4.0x1000 mm 90º
1 x	SPS Remote switch actuator
3 x	PowerBox SparkSwitch RS
2 x	Multi-adapter balancer JST/C - TP
1 x	SPARK Switch 7.4v
1 x	Profile ABS Square 1 x 1000 mm
1 x	40 mm air cylinder
1 x	Mini neumatic retract landing gear
1 x	Mini neumatic retract 4 mm landing gear (Het-rc)
1 x	Nose leg 155 mm with wheels 70 mm
2 x	SIMtransmitter 6 Mode 2
1 x	Mini neumatic retract 3 mm landing gear (Het-rc)
1 x	Landing gear retract neumatic (Jet Legend)
1 x	Micro flex hinge (12 uds)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	ABS angle 3,0x3,0x1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	ABS angle 4,0x4,0x1000 mm
2 x	ABS Strip 1.5x8.0x1000 mm
2 x	Strip ABS 2.0x5.0x1000 mm
1 x	Ferrita 14x8x5.5 mm
1 x	VPP system propeller for AXI VPP motors (spare)
1 x	CYCLONE XT 6.2m ARF
1 x	Fascination 3600 mm ARC
1 x	Fascination 3600 mm (Top Model)
1 x	Albatros red/white (Top Model)
1 x	FOX 3000 mm ARF (FMS)
1 x	Albatros ,spare fuselage (Top Model)
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	SCHARNHORST accessories
2 x	ABS Strip 1.5x3.0x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	Round Rod 2,0x1000 mm
1 x	Strip 2,5x1,25x330 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	12 mm portholes (10 pcs)
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	39,0 mm propeller (rigth propeller)
1 x	SlowFlyer control horn (3 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
2 x	Servo slow down unit (0,7-14,7 sec )
2 x	DPSI magnetic switch actuator (housing)
2 x	MPS Gas-Cap-Powerswitch
1 x	Electronic switch JETI SP6 0-15v/6A
2 x	SWTU2 switch
1 x	Opto Gas Engine Kill Switch
2 x	Switching module high voltage SXH
1 x	UBEC 6A KAVAN
2 x	Selfstart electronic switch
1 x	Hacker X-Pro USB interface V2
2 x	JETImodel DPS 40
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	JETImodel SINGLE BEC
1 x	SPARK Switch 5.9v
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
2 x	SBEC 30 D
1 x	PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x	FX three-position switched channel, long
1 x	Male connector for 20 pines AWG
1 x	Electronic switch JETI SP06 Opto
1 x	Male connector for 16 pines AWG
1 x	MAX BEC 2
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	SPARK Switch 12v
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	Extension 2/3 lipos JST - JST/C
1 x	SBEC Jeti
1 x	Extension 5 lipos JST - JST/C
1 x	Interruptor RX/Batterie
1 x	Opto Gas Engine Kill Switch
1 x	SPS 70V 100/200 A
1 x	PSC 5
1 x	Interruptor SPS 70v 60/120A
1 x	Extension 5 lipos JST/C - JST
1 x	TA1200 Charger Compatible with Smart and Standard LiPo Batteries
1 x	Astra wing Joinner (Top Model)
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	eFuel 30A Power Supply
1 x	Power supply NT 25 Amp.
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Avanti XS Jet , Tricolore Canopy
1 x	Propeller Helice 4BL 70 mm M4 plastico Dcha
1 x	Propeller RABOESCH M4 50 mm (3 Blades pr) (Right hydropropeller)
1 x	Propeller RABOESCH M3 30 mm (4 Blades) (Left hydropropeller)
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x	Skies 2x 335 mm + 1x Esqui 250mm
1 x	Spring clamp for tube Ø29 mm ext 1pc
1 x	Electric spoiler 300 mm (2 pcs)
1 x	ALBATROS 3.0 m (orange/white)
1 x	Round Rod 1,0x1000 mm
1 x	Strip 2,0x2,0x330 mm
1 x	Avanti S 1.8m Jet FREECE TRICOLORI + Landing gear

13,604.63EUR