Top » Catalog » Sailplanes » Electric » ROBBE2665

900.01EUR

CYCLONE XT 6.2m ARF
[ROBBE2665]

CYCLONE XT 6.2m ARF

Description "Robbe Modellsport Cyclone XT 6,2M ARF mit GDRP FUSELAGE 4-piece wing with abachi planking"
The CYCLONE XT is the consistent further development of its predecessor CYCLONE. With an incredible wingspan of 6,20m, it is the giant in the electric glider sky! The epithet XT stands for "extended". The model has a painted GRP fuselage and two 2-piece wings with Abachi planking and GRP carpet pad. Its new LS 6330-15 brushless drive is rated for 8S LiPo operation for powerful climbs and easy takeoff from the launch trolley.
The outer wing design, electrical wing mating using MPX connectors in mounting frames and the new LS 6330-15 long shaft drive motor are the main features of the new Cyclone XT, along with the increased wingspan. The canopy latch has been moved to the rear under the wing/fuselage moldings as is common with large scale model gliders.
The successful HQ/W airfoil has been left in place. It runs from an HQ/W-2.5/12 at the root rib to an HQ/W-2.5/11 in the center and finishes at the winglet with an HQ/W-3/10.5. This is an excellent way to fly extended thermal flights, as this is the CYCLONE XT's profession. The flight characteristics are as usual good-natured and quiet.

Features:
- New Ro-Power Torque LS 6330-15 drive for 8S LiPo (PNP version only).
- Two-piece fuselage made of GFRP/Kevlar reinforced with CFRP
-Wings completely covered with abachi for high compressive strength
-Ready covered with ORACOVER®
-Four-part wing, separable
-Wings pluggable with MPX connectors in mounting frame for electrical connection (PNP version only)
-Solid 14x500mm round steel mating of the inner surfaces, 12x375mm carbon mating for the outer wings
-Middle wings on the upper side completely underlaid with 200g carbon fabric, underside 80g glass fabric
-Outer wings completely underlaid with 80g glass mat
-New canopy lock under wing
-High quality M3 linkage accessories Made in Germany
- Stable elevator linkage with 5/3 mm CFRP tube and M3 clevises
-Reinforced tail construction
-Continuous sandwich spar (carbon-pine-carbon) for maximum bending stiffness
-Precisely fitted anti-twist devices in all wing sections
-High degree of prefabrication

Technical data
Airfoil: HQW
Building Skill: Fortgeschritten
Control: H,S,Q,M,WK
Drive Type: Electro
Flight Skill: Profi
Flight weight approx. (g): 11400
Fuselage: Fiberglass/Carbone
Length (mm): 2250
Manufacturer: Robbe
Rec. battery: 8S/5000-7000mAh LiXX
Rec. engine: Ro-Power Torque LS 6330-15
Version: ARF - ALMOST READY TO FLY
Wing-span (mm): 6200
Wings: Styro/Glass/Abachi

Box contents
- Model CYCLONE XT largely prefabricated
- Two-piece fuselage made of GRP/Kevlar CFRP reinforced
- Abachi planked wings, GRP/CFRP reinforced
- Ready covered with ORACOVER
- Assembly instructions in German/English/French

Das Produkt Cyclone XT 6,2M ARF mit GFK Rumpf, von Robbe Modellsport in der Kategorie Electric Glider Models hat eine Spannweite von 6200 sowie ein Gewicht von 11400. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M,WK. Das Modell ist als ARF - ALMOST READY TO FLY ausgeführt . Wir empfehlen einen 8S/5000-7000mAh LiXX Akku für dieses Elektroflugmodell.

under request

Reviews

Quick Find

Shopping Cart

1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Gates hinge
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	CC 01
1 x	Adapter lead MPX/XT60
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
3 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
2 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
2 x	Small pinned hinge (12 uds)
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	30 cm BEC cable (male)
1 x	5 LiPo XH>EH adapter
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	15 mm reinforced hinge
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
2 x	Long pinned hinge (12 uds)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	CM-3
1 x	Profile ABS half cane 2.0x1000 mm
1 x	Nylon hinge for flaps 33x9 (2 pcs)
2 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
2 x	3 LiPo XH>EH adapter
2 x	Large flex hinge (12 uds)
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	U Profile ABS 1,0x2,0x1000 mm
2 x	USB HLS prog. interface
2 x	BEC 3A FOXY
1 x	L-Connector 1.5 mm x 1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Circlick securite
1 x	Adapter lead MPX/EC3
1 x	Profile ABS half cane 2.5x1000 mm
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	18 mm reinforced hinge
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Miniature brass strap hinge, 1 m
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	Flap hinge (6 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Profile ABS Square 2 x 1000 mm
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	CC 02
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	MPX-Dean "T" Adapter
1 x	ABS angle 5,0x5,0x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
2 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	CC 03
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	4 LiPo XH>EH adapter
2 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	2 LiPo XH>EH adapter
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Dean "T" - Futaba Adapter
1 x	TrainerCord (master-learner)
2 x	GameCommander USB Universal
3 x	Simulador RealFlight RF-9.5 S (sin emisora)
2 x	Slave-cable USB Easy Sim
1 x	Interface Jack Adapter IKARUS
1 x	Ferrita 27x14x7 mm
2 x	Round Rod 2,5x1000 mm
3 x	Strip 1,5x1,5x330 mm
2 x	Round Rod 3,0x1000 mm
3 x	Strip 3,5x1,75x330 mm
1 x	Horn 5/20 with M2 Bearing
1 x	Horn 6/20 with M3 Bearing
1 x	Horn with ball 40x30
1 x	Cable with accesories
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Cable control set
1 x	Extra long horn 60x30
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Control horn long w/ball
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	6 mm red aluminium threaded horn with patella
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Horn 6/27 with M3 Bearing
1 x	5 mm M2 variable horn
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Brass control horn M2 long for wire (10pcs)
1 x	Horn mando small (2 pcs)
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	6 mm M3 variable horn
1 x	5 mm M2 variable inclined horn
1 x	Horn 5/10 with M2 Bearing
1 x	Horn 6/35 with M3 Bearing
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	140 mm rods set for direction control
1 x	Extension silicon 10 cm (Graupner)
1 x	Motor DLE 170 M- Paramotors
1 x	Cable set PREMIUM , fuselage/wing one4one
1 x	10m servo "Premium" wire (white/red/blue)
1 x	Oracover CHROME 2m
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
2 x	Profile ABS Square 4 x 1000 mm
1 x	Support Flush MPX Conector (6 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	EWC6 40 cm wing connector
2 x	Long Switch On/Off micro
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
2 x	EWC3 40 cm wing connector
1 x	Extension 2/3 lipos JST/C
2 x	Magnetic Interruptor MULTIPLEX
2 x	Female connector JST SH 1.0mm with 10 cm wire
2 x	USB interface ALTIS
1 x	Pin hinge 26x11 mm (10 uds)
2 x	Male Prolonger TP 4/5S
1 x	Female connector for 10 pines AWG
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Profile ABS half cane 3x1000 mm
2 x	PSC 6
1 x	Profile ABS triangular 4.0x1000 mm 90º
1 x	SPS Remote switch actuator
3 x	PowerBox SparkSwitch RS
2 x	Multi-adapter balancer JST/C - TP
1 x	SPARK Switch 7.4v
1 x	Profile ABS Square 1 x 1000 mm
1 x	40 mm air cylinder
1 x	Mini neumatic retract landing gear
1 x	Mini neumatic retract 4 mm landing gear (Het-rc)
1 x	Nose leg 155 mm with wheels 70 mm
2 x	SIMtransmitter 6 Mode 2
1 x	Mini neumatic retract 3 mm landing gear (Het-rc)
1 x	Landing gear retract neumatic (Jet Legend)
1 x	Micro flex hinge (12 uds)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	ABS angle 3,0x3,0x1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	ABS angle 4,0x4,0x1000 mm
2 x	ABS Strip 1.5x8.0x1000 mm
2 x	Strip ABS 2.0x5.0x1000 mm
1 x	Ferrita 14x8x5.5 mm
1 x	VPP system propeller for AXI VPP motors (spare)
1 x	CYCLONE XT 6.2m ARF
1 x	Fascination 3600 mm ARC
1 x	Fascination 3600 mm (Top Model)
1 x	Albatros red/white (Top Model)
1 x	FOX 3000 mm ARF (FMS)
1 x	Albatros ,spare fuselage (Top Model)
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	SCHARNHORST accessories
2 x	ABS Strip 1.5x3.0x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	Round Rod 2,0x1000 mm
1 x	Strip 2,5x1,25x330 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	12 mm portholes (10 pcs)
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	39,0 mm propeller (rigth propeller)
1 x	SlowFlyer control horn (3 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
2 x	Servo slow down unit (0,7-14,7 sec )
2 x	DPSI magnetic switch actuator (housing)
2 x	MPS Gas-Cap-Powerswitch
1 x	Electronic switch JETI SP6 0-15v/6A
2 x	SWTU2 switch
1 x	Opto Gas Engine Kill Switch
2 x	Switching module high voltage SXH
1 x	UBEC 6A KAVAN
2 x	Selfstart electronic switch
1 x	Hacker X-Pro USB interface V2
2 x	JETImodel DPS 40
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	JETImodel SINGLE BEC
1 x	SPARK Switch 5.9v
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
2 x	SBEC 30 D
1 x	PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x	FX three-position switched channel, long
1 x	Male connector for 20 pines AWG
1 x	Electronic switch JETI SP06 Opto
1 x	Male connector for 16 pines AWG
1 x	MAX BEC 2
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	SPARK Switch 12v
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	Extension 2/3 lipos JST - JST/C
1 x	SBEC Jeti
1 x	Extension 5 lipos JST - JST/C
1 x	Interruptor RX/Batterie
1 x	Opto Gas Engine Kill Switch
1 x	SPS 70V 100/200 A
1 x	PSC 5
1 x	Interruptor SPS 70v 60/120A
1 x	Extension 5 lipos JST/C - JST
1 x	TA1200 Charger Compatible with Smart and Standard LiPo Batteries
1 x	Astra wing Joinner (Top Model)
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	eFuel 30A Power Supply
1 x	Power supply NT 25 Amp.
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Avanti XS Jet , Tricolore Canopy
1 x	Propeller Helice 4BL 70 mm M4 plastico Dcha
1 x	Propeller RABOESCH M4 50 mm (3 Blades pr) (Right hydropropeller)
1 x	Propeller RABOESCH M3 30 mm (4 Blades) (Left hydropropeller)
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x	Skies 2x 335 mm + 1x Esqui 250mm
1 x	Spring clamp for tube Ø29 mm ext 1pc
1 x	Electric spoiler 300 mm (2 pcs)
1 x	ALBATROS 3.0 m (orange/white)
1 x	Round Rod 1,0x1000 mm
1 x	Strip 2,0x2,0x330 mm
1 x	Avanti S 1.8m Jet FREECE TRICOLORI + Landing gear

13,604.63EUR