1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Connectors banna oro 0,8 mm (M/F)
2 x Conector Servo female 4 pines
2 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Connectors banna oro 2 mm (M/F)
2 x Connectors banna oro 3,5 mm (M/F)
1 x Conector JR Servo male (10 pcs)
2 x Conector BEC male (10 pcs)
1 x Conector FUTABA Servo male (10 pcs)
1 x Conector FUTABA Servo male BLUE silicon (10 pcs)
2 x Bag connector 2 mm
2 x Connectors banna oro 8,0 mm (M/F)
1 x 30 cm MULTIPLEX female connector
1 x Conector JR Servo male (10 pcs)
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x Conector JR Servo female (10 pcs)
1 x Banna gold connector 2,5 mm (M/F)
1 x Conector JR Servo female (10 pcs)
1 x Conector FUTABA Servo female BLUE silicon (10 pcs)
2 x Connectors DEANS (T)
2 x 2 mm female connector (2 pcs) with safety connector
2 x Connectors DEANS 4 pins (1 pair)
2 x 2 mm male connector (2 pcs) with safety connector
2 x Connectors banna oro 6,0 mm (M/F)
2 x Conector BEC female (10 pcs)
1 x Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Connectors DEANS (T) micro
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
2 x 30 cm DEANS female connector
1 x Connectors banna oro 4 mm (M/F)
2 x Connectors banna oro 4 mm (M/F) (ultralight)
2 x Digital Air Speed Sensor And Pitot Tube Set
3 x Tube Pitot to PIXHAWK
2 x PIX Hawk with accesories
1 x Ferrita con funda
1 x Ferrita 27x14x7 mm
1 x XH male balance (3S) connector (2 pcs)
1 x Connector CAN 15
2 x XH male balance (2S) connector (2 pcs)
1 x XH female balance (2S) connector (2 pcs)
1 x Connectors banna gold 5,5 mm (M/F)
2 x XH female balance (5S) connector (2 pcs)
1 x MPX Sub-D Adaptor
1 x XH female balance (3S) connector (2 pcs)
1 x Connectors banna oro 3 mm (M/F)
1 x Gold antispark 4 mm plug
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x MPX Support
1 x Cable Cargador FUTABA
1 x Rubber profile 6-2 mm 2M
1 x Tape GFK 50 mm
2 x Cable grommet 9.5 mm (4 uds)
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
2 x PPM Encoder Module
2 x 4 mm Prop Adapter M8
2 x Cable grommet Ø 5 mm (4 uds)
1 x Wing bolts M3 Steel screw blue (2 pcs)
1 x Cockpit metalic closing
1 x 100 mm rods set for direction control
1 x Cockpit latch closing I=10 mm
1 x Cockpit aluminium closing 5.4g
1 x Glass fabric 425 g/m² aero,10x1m
1 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x MPX screwable clips (5 pcs)
1 x Contacto macho pin conector (10 pcs)
1 x 110x55 mm SLH KOVO wheel
1 x MPX PCB "Gender-Changer (5 pcs)
1 x 100x50 mm SLH KOVO wheel
1 x 22m Fitting barb
1 x Soporte carbono MR30 (2 pcs)
1 x Conector XT-30 (hembra)
1 x 1/6 Pilot "Garry"
1 x MR30 connector male
1 x Regulador Actro-Marine 60A
1 x Railing L250 mm (10 pcs)
1 x Antenna 50 mm (2 uds)
1 x ROOKIE 20Amp (25) A controller
1 x Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm
1 x Liferaft 47 mm
1 x Rigid coupling brass Ø 5 mm L: 25 mm
2 x Motor ACTRO 35-4-1100
1 x Ancla Met. 16 mm (5 pcs)
1 x Prop Shaft Adapter 5 mm/M8 "long"
1 x 3,2 mm Prop Adapter M8
1 x 6 mm Prop Adapter M8
1 x 8 mm Adapter for AXI53xx
1 x Universal Prop Saver
1 x AXI Cooler 41xx
1 x Radial Mount Set for AXI2814 and AXI2820 V2
2 x Sun Cover PC 21 XXL (JMB Jets)
1 x Cierva C30 simulated motor
1 x Blades 330mm
1 x LA500 rotor head shaft
1 x LA500 pre-rotation gear
1 x Bearing housing
1 x Raer wall
1 x Rotorshape Autogyro
1 x Prop Shaft Adapter 5 mm "long"
1 x 3 mm Prop Adapter M6
1 x 5 mm Prop Adapter M6
1 x 2 mm Prop Adapter M6
1 x Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x 5 mm Prop Adapter M8
1 x 2.3 mm Adapter for 30 mm spinners
1 x 3 mm Prop Adapter M6
1 x Prop Shaft Adapter 4 mm/M8 "long" 35 mm
1 x 4 mm Prop Adapter M8
1 x 3.2 mm Prop Adapter M6
1 x AXI Cooler 22xx
1 x Prop Holder AXI 41xx V2
1 x Motor holder AXI
2 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Suncover 100cc Red
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Head runner
1 x LA500 tail empennage
1 x Ball joint long
1 x LA500 pre-rotation gear hub
1 x Head upper part
1 x Head spacer
1 x Motor rotor LA-500
1 x Rotorshape Elevator
1 x Head core bushing
1 x Glass fibre braided sleeve (45mm) roll 10m
1 x Life guard Ø 8 mm (24 pcs)
1 x Debonder UN - CURE™ (30g)
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x 90 mm rods + T patellas set for direction control
1 x 80 mm rods set for direction control
1 x Allen wheel collar M3x5
1 x Cable grommet Ø 4 mm (4 uds)
1 x 38x4,5 mm wires output (2 pcs)
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x Servo HBS 690BB HV Digital
1 x Soporte metal para servos
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Klumpblock (Plastik), Höhe 8 mm, 2 Rille, 20 Stück
1 x Cyano ULTRA - CURE™ (21g)
1 x TopFuel LiPo 25C-ECO-X 1300mAh 2S
1 x Thread locker IC-Loc™ green "wicking" 10 ml
1 x Cyano INSTA - CURE™ (225g)
1 x PARTALL® Hi-Temp Wax, 340 g
1 x Epoxy SLOW-CURE™ 30 min (260g)
2 x Cyano INSTA - CURE™ Pocket (18g)
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Catalyst INSTA - SET™ (235g)
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Cyano INSTA - CURE™ (56g)
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Sanyo RX Battery Eneloop 4,8 V JR
1 x Propeller Pleg CAM Carbon 15x10
1 x Propeller Pleg CAM Carbon 11x6
1 x Propeller Pleg CAM Carbon 15x13
1 x Propeller Pleg CAM Carbon 16x13
1 x Propeller Pleg CAM Carbon 13x6.5
1 x Propeller Pleg CAM Carbon 15x8
1 x Propeller Pleg CAM Carbon 12x8
1 x 250 mm / 16 mm Airbrakes
1 x 140 mm rods + T patellas set for direction control
1 x Allen wheel collar M4x4
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x Allen wheel collar M4x6
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x SERVO DES 806 Pignons
1 x SERVO DES 658 BB MG
1 x SERVO DES 707 BB MG
1 x TopFuel LiPo 35C-ECO-X 2400mAh 3S MTAG
1 x TopFuel LiPo 20C-ECO-X 4600mAh 5S Competition F3A 2017
1 x TopFuel LiPo 35C-POWER-X 2400mAh 2S
1 x SCHARNHORST Battleship 1:200
1 x Propeller Pleg CAM Carbon 16x10
1 x 4 mm Prop Adapter M6
1 x Spinner propeller pleg. 38 mm / 5,0 mm
1 x 34 mm Alu spinner 3.17 mm pleg. propeller
1 x PH6 adapter for 6mm M10 AXI for AXI41xx
1 x Prop rubber XS set 4 pieces
1 x Spinner propeller pleg. 40 mm / 4,0 mm
1 x Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm
1 x Spinner propeller pleg. 40 mm / 3,2 mm
1 x Spinner propeller pleg. 30mm axle 3,0 mm
1 x Spinner Alumin. propeller pleg. 40 mm / 3,0 mm
1 x LA500 front gear holder
1 x Quick hose connector 4-3 mm
1 x 5 mm Prop Adapter M8
1 x 11 mm Rubber pads (14 pcs)
1 x Regulador Actro-Marine 80A
1 x Motor ACTRO 28-3-1300
4,895.82EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies