Top » Catalog » Helicopters » Accesories » Blades » SP132003

554.98EUR

Rotor blade 3Bl Scale 1050R
[SP132003]

These blades have been developed for the scale pilots. The dull black surface supports the scale look. Our logo, the three bars, was placed at the inside of the blade nearly invisible but noble, to support the scale look. These blades do have an asymmetrical airfoil and produce lift an angle of attack of 0 degree, enabling the pilot to decrease the flight rpm considerably, without losing any climb performances. The additional weight of the fuselage, lighting system and other mounting parts can be easily compensated for. These blades are available as two blades systems and in addition to as multiblades system with much smaller blade depth. The very low fl ow line combined with the more to the tip of the blade positioned center of gravity prove a very stable straight and level fl ight and optimized performance. These attributes are supporting the requirements of modern FBL Systems, for which these blades are optimized.

Needless to say, all blades are well balanced to function as one unit.

root: 14mm
bolt hole: 6 mm ca
weight/per blade: 400g
width: 100 mm
max rpm. forward: 1400
air foil: 1-3 mm
direction of rod: asymmetricalclockwise

under request

Reviews

Quick Find

Shopping Cart

2 x	Green smoke canister 100 g
2 x	Red smoke canister 140 g
2 x	3l Smoke oil
2 x	Ventral support for AX-18/AX-60
3 x	White smoke canister 100 g
2 x	Green smoke canister 140 g
1 x	Parachutist
3 x	B4-0 rocket charges (6 pcs)
1 x	Parachute expulsion foam
3 x	White smoke bombs AX-9 (10 pcs)
1 x	Smoke set "S"
2 x	Blue smoke canister 140 g
2 x	Initior Receiver FRX2 Wireless
2 x	"M" set
2 x	Smoke set "M"
3 x	Initior Transmitter FTX2 Wireless
3 x	Plastic caps for AIR BURTS (30 pcs)
1 x	"S" set for planes
2 x	Red smoke canister 65 g
2 x	White smoke bombs AX-3 (10 pcs)
2 x	Stainless steel cable Ø 1.3 mm (10 m)
2 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	White smoke canister 140 g
1 x	Electric rocket starters (6 pcs)
2 x	1/12 Pilot "Fighter"
1 x	White smoke bombs AX-18 (5 pcs)
1 x	Yellow smoke canister 100 g
2 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Remote electric ignition system
3 x	1/4 Pilot "Heidi"
2 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	1/12 Pilot "Cougar"
3 x	Wing tips support for AX-18/AX-60 (2 pcs)
2 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	AX-60 starters (5 pcs)
1 x	"S" set for boats
1 x	Covered closure or fairings
1 x	Steering arm 16 mm Ø 4 mm
2 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	1/6 Pilot "Buddy"
2 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Yellow smoke canister 140 g
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Piloto Jet "Red" 1/6 Scale
2 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	Yellow smoke canister 65 g
3 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Red smoke bombs AX-60 (5 pcs)
2 x	1/6 Pilot "Garry"
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	Screw-lock connector M2 (2 uds)
3 x	Steering arm 12 mm Ø 4 mm
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
4 x	1/6 Pilot "Tony"
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Cockpit plastic closing
2 x	Pilot "Goose" (Slimline)
1 x	1/4 Pilot "Mike"
1 x	1/6 Pilot "John"
2 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Piloto jet 130 mm
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
2 x	Flap hinge (6 pcs)
2 x	Flap hinge 33x9 mm (6 pcs)
2 x	Fast'n EZ-CA-Hinge (12 uds)
2 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
2 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
2 x	Micro flex hinge (12 uds)
1 x	15 mm reinforced hinge
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Large flex hinge (12 uds)
1 x	Long pinned hinge (6 uds)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Long pinned hinge (12 uds)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	Vest clothes Hispano Aviación
2 x	Shirt Hispano Aviación
2 x	Cap Hispano Aviación
1 x
1 x	Crimping tool
1 x	Cut tube
1 x	Ball Link Plier
1 x	1,5x50 mm allen screwdriver
1 x	Vacuum pump 12 CFM
1 x	Digital precision scale up to 2000 g
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Screwdriver for Torx® TX8
1 x	Vacuum pump P1-N
1 x	Tape GFK 25 mm
1 x	Oracover Verde 2 m
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Medidor ángulos y/o incidencias
2 x	Green smoke canister 65 g
1 x	Jeti Black cap
1 x	ABS tube 16.0x14.0x1000 mm
3 x	PCARD Wireless System
2 x	Red smoke canister 100 g
3 x	Steering arm 16 mm Ø 3 mm
2 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	38x4,5 mm wires output (2 pcs)
2 x	One touch canopy lock
2 x	AX-60 starters (5 pcs)
2 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Smoke set "Glider"
1 x	1/6 Pilot "Cindy"
1 x	Pilot "Anthony" (Slimline)
1 x	Allen wheel collar M3x5
1 x	White smoke canister 65 g
1 x	Clip mini fixing for wing (2 pcs)
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs)
1 x	Blue smoke canister 100 g
1 x	Clip fixing for wing (2 pcs)
1 x	Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs)
1 x	45 mm rods set for direction control
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x	90 mm rods + T patellas set for direction control
1 x	Pushrod octagone 4/3
2 x	Power supply NT 25 Amp.
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Robart Door Hinge (Pk2)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	120x60 mm SLH KOVO wheel
1 x	1/12 Pilot "Tom"
1 x	Locking cable tie 4.6x203 (uds)
1 x	100g Flux Paste for Silver Solder
1 x	Dremel PERMAGRIT 18 mm round lime
1 x	2,5x60 mm allen screwdriver
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	Digital weight, angle and balance meter BASIC
1 x	Nose OPTIMA 2.200 mm (Elec or Glider)
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	Beech dowels 10 mm x 1000 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
2 x	BALSA triangular 10x10x1000 mm
2 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	BALSA trip 3.0x3.0x1000 mm
2 x	Balsa panel 8.0x100x1000 mm
1 x	Control for forward wheel (MINI)
1 x	IKARUS plane
1 x	Fox MDM 1 4000 mm DeLuxe
1 x	BABY glider drawings (Aero-naut)
1 x	Albatros ,spare cockpit (Top Model)
1 x	Fox MDM 1 4000 mm DeLuxe,Panel instrument Fox MDM 4m
1 x	Albatros red/white (Top Model)
1 x	Aero-Master Cabine (Aero-naut)
1 x	FANTASY ARF 3.2m
1 x	SkyMaxx 1.550 mm (kit)
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	Wheel collar 3 mm Ø (4 uds)
1 x	21x14 Falcon electric carbon prop (64 g)
1 x	20x15 Falcon electric V2
1 x	19.5x13 Falcon electric 3-Blade carbon prop (54 g)
1 x	DOMINO 46-55 Trainer 1583 mm
1 x	BULLIT Wing 1095 mm
1 x	BOOMERANG II 40/46 ARF 1.55mm
1 x	SCANNER 46-55 Sport Scale 1:7 ARF
1 x	BULLIT Wing 840 mm
1 x	Wing bolts M3 Steel screw blue (2 pcs)
1 x	Wheel collar 3.5 mm Ø (4 uds)
1 x	Wheel collar 6 mm Ø (4 uds)
1 x	Wing bolts M6 Steel screw Blue (2 pcs)
1 x	Triple rod con. 3mm Pushrod (2 pcs)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x	Wing bolts M6 Steel screw Red (2 pcs)
1 x	Tip wing protector 28x10x12 (2 pcs)
1 x	Triple rod con. 2mm Pushrod (2 pcs)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Window mounting channel Type H 2.5x0.5 (2 m)
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	Tip wing protector 40x14 (2 pcs)
1 x	Tip wing protector 30x10 (2 pcs)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	eFuel 30A Power Supply
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Sealing Iron Sleeve STD
1 x	Motor A50-16 S V4
1 x	41x5,5 mm wires output (2 pcs)
1 x	Split M1,2x10 (10 pcs)
1 x	Snap long M2 (10 uds)
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Balsa panel 6.0x100x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	A/C economy plywood 600x300x6+.0 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Birch plywood plate 600x300x1.2 mm
1 x	BIG MOSNTER
1 x	ENIGMA ARF
1 x	IKURA GPS 4.28 m
1 x	Canopy Sweet / Siesta
1 x	Tube bender
1 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Motor A40-10S V4 14-Pole
1 x	Starter EM Gear Power 80
1 x	Spinner plastic black fixed propeller 30 mm
1 x	36 mm white plastic spinner for fixed propeller
1 x	Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x	Steel brush wheel with 2.35mm
1 x	42 mm white plastic spinner for fixed propeller
1 x	Starter EM Gear Power 250
1 x	45 mm white plastic spinner for fixed propeller
1 x	A40-10S V2 8-Pole + 6,7:1 PG
1 x	Bungee HLG Premium
1 x	Vasa model Catapult
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Opale Rucksack
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Birch plywood plate 600x300x2.5 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Ballast 700gr OPALE
1 x	Pine wood slat 10x10x1000 mm
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	Trike XL motor set (motor+esc+prop)
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Motor A50-10L Turnado V3 Glider
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Motor A20-26 M EVO
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Paramotor BackPack XXS (without accessories)
1 x	BALSA triangular 15x15x1000 mm
1 x	Balsa panel 4.0x100x1000 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	A/C quality beech plywood 600x300x8.0 mm

20,172.38EUR