1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Conector Servo female 4 pines |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Optotronix Aurora Plug |
1 x | Connectors banna oro 3,5 mm (M/F) |
3 x | Connector CAN 15 |
1 x | Gold antispark 5,5 mm plug |
1 x | MPX Sub-D Adaptor |
1 x | XH female balance (5S) connector (2 pcs) |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Conector BEC male (10 pcs) |
1 x | 30 cm DEANS female connector |
1 x | Gold antispark 4 mm plug |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | 10 mm Prop Adapter M12 |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
2 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | Tape GFK 50 mm |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
2 x | 3 LiPo XH>EH adapter |
1 x | TrainerCord (master-learner) |
1 x | Dean "T" - Futaba Adapter |
2 x | Adapter lead MPX/EC3 |
2 x | SE Ring HACKER 300 mm (2 pcs) |
2 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | Copper lacquer wire Ø0,2 mm (5 m) |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | SE Ring 300 mm (2 pcs) |
2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | SE Ring 200 mm (2 pcs) |
2 x | Tape GFK 38 mm |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
2 x | |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | 5 LiPo XH>EH adapter |
3 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | SE Ring 250 mm (2 pcs) |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
3 x | SE Ring 350 mm (2 pcs) |
2 x | Circlick securite |
1 x | CC 05 |
1 x | 4 LiPo XH>EH adapter |
3 x | SE Ring 480 mm (2 pcs) |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | JETImodel SINGLE BEC |
3 x | SE Ring 330 mm (4 pcs) |
1 x | 30 cm BEC cable (male) |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | USB HLS prog. interface |
1 x | SE Ring 450 mm (2 pcs) |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
2 x | Marker ties (20 pcs) |
3 x | SE Ring 400 mm (2 pcs) |
2 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | BEC 3A FOXY |
1 x | Trike XL motor set (motor+esc+prop) |
1 x | Canopy Latch |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Socket head long ball link M3 (2 uds) |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Conector JR Servo female (10 pcs) |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | 20x1000 mm Ring Strap Back To Back |
1 x | 5 mm Prop Adapter M6 |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
2 x | 4 mm Prop Adapter M6 |
1 x | 3.17 mm Prop Adapter CN-Spinner |
2 x | 3.2 mm Prop Adapter M6 |
1 x | 2,3 mm Prop Adapter M6 |
1 x | 4 mm Prop Adapter CN-Spinner |
1 x | 4 mm Prop Adapter M8 |
1 x | SBEC Jeti |
1 x | Servo Robbe FS 525 BB MG HV |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | SPS 70V 100/200 A |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Servo Tester |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Extension 2/3 lipos JST/C |
1 x | Balsa panel 2.0x100x1000 mm |
2 x | SWTU2 switch |
1 x | Switching module high voltage SXH |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Servo MKS HV1220 |
1 x | Servo mounting frame SV-1260MG |
1 x | Prolonguer for Balancer Thunder Power 6S |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Servo RHINO pro SHV digi 4 |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | MAX BEC 2D plus EX |
2 x | Short Switch On/Off micro |
1 x | SBEC 40 |
1 x | SAVOX SH 1290 MG servo digi |
2 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
2 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
3 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
2 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Combo RAY C3542-1000 + ESC 60A |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell |
2 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Silicone red 0,5 qmm wire ( 1 m) |
1 x | Cable Cargador FUTABA |
1 x | Silicone black 2,5 qmm wire ( 1 m) |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
2 x | Brazo servo MKS X8 Metal L:1.25/1.5 inc |
1 x | MAX BEC |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Servo MKS HBL380 |
1 x | Servo SAVOX SV-1270 TG |
1 x | MPS Gas-Cap-Powerswitch |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | Electronic switch JETI SP6 0-15v/6A |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | SBEC 30 D |
1 x | SPARK Switch 12v |
1 x | Savox Brushless Servo SC-1251 MG |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Servo Robbe FS 128 BB MG HV Digital |
1 x | Opto Gas Engine Kill Switch |
1 x | Servo Metal Horn 15.5 mm MKS |
1 x | Servo slow down unit (0,7-14,7 sec ) |
1 x | Servo SAVOX SV-1254 MG HiVolt Low Profile |
1 x | Extension 6 lipos XH > EH |
2 x | PowerBox SparkSwitch RS |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | DPS Switch JR/JR |
1 x | Tape GFK 25 mm |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | Release wax 250ml |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | SE Ring 360 mm (2 pcs) |
1 x | 4 mm Prop Adapter M8 |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Propeller electric carbon 8.5x7 |
1 x | Servo MKS HV69 |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | 270 mm 3/3 mm shaft ship |
1 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
1 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
1 x | Fiberglass tube 6/4x1000mm |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
1 x | 10cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Propeller 3x2 |
1 x | 3-blades 28x12 carbon prop Super Silence |
1 x | TMM 2512-3S heli |
1 x | Extension for SensorSwitch 30cm |
1 x | PSC 6 |
1 x | EDGE 540-A 105" (2660 mm) |
1 x | Cyanocrylate MD GA460 odourless 20g |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Digital scale up to 40 kg |
1 x | 3.2 mm Prop Adapter M8 |
1 x | Propeller POWER-PROP 12x8 |
1 x | Servo MKS HV 777A+ |
1 x | aluminium servo arm V2-JR 2,0 inch M3 |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Servo MKS HBL599 SL |
1 x | Propeller POWER-PROP 12x9 |
1 x | CC 02 |
1 x | Servo SAVOX SA-128S SG |
1 x | Servo MKS HBL550 |
1 x | CM-3 |
1 x | Male connector for 16 pines AWG |
1 x | JETImodel Addcap 1640 |
1 x | DPSI Ampere battery backer |
1 x | Extension 5 lipos JST/C |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
2 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Female connector for 16 pines AWG |
1 x | CC 01 |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
2 x | Double conector with JR adapter and 200 mm extension |
2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Extension 5 lipos JST - JST/C |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Savox Brushless Servo SB-2271SG |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Spare Shaft Ø4mm L:450x23mm M4 |
2 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | 60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | USB interface ALTIS |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | 3-blades 16x10 carbon prop Super Silence |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | Extension for SensorSwitch 60cm |
1 x | Conector JR Servo female (50 pcs) |
1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
1 x | Cable set Premium™ MAXI "one4two" |
1 x | Extension 5 lipos JST/C - JST |
1 x | Adapter lead MPX/XT60 |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller) |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | 120x60 mm SLH KOVO wheel |
|
9,303.19EUR |