1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Small Crow DLE-170M
1 x Motor DLE 170 M- Paramotors
2 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Xplorer2 anemometro
2 x 2 mm female connector (2 pcs) with safety connector
1 x Plasti Dip Liquid Tape 429 ml black
1 x Conector JR Servo female (50 pcs)
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Crimping tool
1 x ABS rectangular profile 10x5.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x ORACOVER transparent Yellow (10 m)
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x Soporte filtro FESTO (4 pcs)
2 x Tapa estado carga XT-60 (6 pcs)
1 x Aro pasacable Ø20 mm (4 pcs)
2 x Soporte grifo FESTO (2 pcs)
1 x Xplorer4 anemometro
2 x Xplorer1 anemometro
3 x Big-Malibu XL Roof box with surfboard rack GREY
1 x Big Crow DLE-170M
1 x Motor DLE 430 cc - Paramotors
1 x Silent-blocks DLE 170M
1 x Motor DLE 200cc Std
1 x Transmitter Crystal 35 Mc/s Ch 77
1 x Crystal Universal RX 35.140 Ch 74
2 x DIVA cabin cruiser
1 x Landing gear strap large (4 uds)
2 x EasyFLY Addon
2 x RF9 Flight Simulator with Spektrum Controller
2 x GameCommander USB Universal
1 x Crystal Universal RX 35.070 Ch 67
1 x Crystal Universal RX 35.020 Ch 62
1 x Crystal Universal RX 35.170 Ch 77
1 x SCHARNHORST Battleship 1:200
1 x 2,3 mm Prop Adapter M6
1 x Prop Shaft Adapter 4 mm/M8 "long" 35 mm
2 x 3,2 mm Prop Adapter M8
1 x 4 mm Prop Adapter CN-Spinner
1 x 3,2 mm Prop Adapter M6
1 x 3.2 mm Prop Adapter M6
1 x Prop Shaft Adapter 5 mm "long"
1 x Tirpiz Battleship 1:200
1 x 4 mm Prop Adapter M6
1 x 3 mm Prop Adapter M6
1 x La Capitania di Venetia accesories
1 x 6 mm Prop Adapter M8
1 x Prop Shaft Adapter 5 mm/M8 "long"
1 x MG cannon 1.8 cm (5 pcs)
1 x 2,3 mm Prop Adapter M6
1 x Aero-Master Cabine (Aero-naut)
1 x Wheel collar 4 mm Ø (4 uds)
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x Wheel collar 3 mm Ø (4 uds)
1 x Mudguard for 140/165 mm wheels
1 x Support pumb/filter Xicoy X45
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Aro pasacable Ø25 mm (4 pcs)
1 x Support Filtro FESTO
1 x Crystal Universal RX 35.090 Ch 69
1 x Balsa panel 2.0x100x1000 mm
1 x 4,8x1000 mm 2:1 blue termoretract tube
1 x 1,2x1000 mm 2:1 red termoretract tube
1 x 2,4x1000 mm 2:1 green termoretract tube
1 x 12,7x1000 mm 2:1 green termoretract tube
1 x 3,2x1000 mm 2:1 black termoretract tube
1 x 2,4x1000 mm 2:1 red termoretract tube
1 x 4,8x1000 mm 2:1 black termoretract tube
1 x F4E Phantom Scale 1:7
1 x ASPIRE Red ARF 2.000 mm, Front Fuselage
1 x ASPIRE Blue ARF 2.000 mm
1 x HAWKER HUNTER 1:5,8, Electric retract landing gear
1 x Power MULTIlight
1 x Interface Realflight Simulator
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x Servo arms set HS-60/81/85/5082MG/5085mg
1 x Servos security connector (2 pcs)
2 x Servo ROBBE FS-31 Pico Servo
1 x 25 mm carbon servo arm
1 x Servo arms set 40/50/55/5055 MG
1 x Adaptador USB - YGE
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Crystal RX 35.120 Ch 72
1 x Receiver Crystal 35 Mc/s Ch 62
1 x Crystal Universal RX 35.050 Ch 65
1 x 3 LiPo XH>EH adapter
1 x 22 mm Cut Disc Proxxon/Dremmel
1 x 6,4x1000 mm 2:1 blue termoretract tube
1 x 1,2x1000 mm 2:1 black termoretract tube
1 x 2,5x60 mm allen screwdriver
1 x 105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x 2,0x50 mm allen screwdriver
1 x 3,0x60 mm allen screwdriver
1 x 19 mm 2:1 black termoretract tube
1 x Remolcador "Jonny Hafenschlepper"
1 x F9F COUGAR Red ARF 1.562 mm
1 x Bags de Luxe ODYSSEY
1 x Tank + hopper Kevlar ASPIRE 4 L Kero / 1.5 L Smoke
1 x HAWKER HUNTER 1:5,8 (1.770mm)
1 x L-39 Albatros 1:4.75, Electric retract landing gear
1 x Tank + hopper Kevlar ASPIRE 6 L Kero
1 x ASPIRE Red ARF 2.000 mm, Set Elevators
1 x Set Legs + Wheels with brake ASPIRE
1 x F-16 Falcon Black Knights 1:6 (1630 mm)
1 x ASPIRE Red ARF 2.000 mm, Canopy
1 x ASPIRE Red ARF 2.000 mm
1 x ASPIRE Navy ARF 2.000 mm
1 x Tank Kevlar ASPIRE 4 L Kero / 1.5 L Smoke
1 x 6 mm blue aluminium threaded horn with patella
1 x SIMtransmitter 6 Mode 2
1 x Slave-cable USB Easy Sim
1 x Interface Jack Adapter IKARUS
1 x Servo GO-1280 MG 40 kg.cm 0.085s/60º
1 x Servo JETI DSHV 3D13T (13 Kg)
1 x Servo GO-10S41MG 10.5 kg.cm 0.075s/60º
1 x Servo GO-1053MG 20 kg.cm 0.17s/60º
1 x Aluminium servo arm (2 uds)
1 x Servos wing assembly set HS 80/81/82/85
1 x Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x Servo DL3017 Digi 17Kg-0.15s/60º
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x Servo GO-1017MG 4.5 kg.cm 0.10s/60º
1 x Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS)
1 x Servo Robbe FS 128 BB MG HV Digital
1 x Horns set HS-65HB/MG, 5065MG
1 x Servo GO-1073MGW 32 kg.cm 0.135s/60º
1 x Servo GO-1013 MG 3.8kg
1 x Servo GO-12S69MG 26kg.cm 0.10s/60º
1 x MIG 29 3D RTF, Servo
1 x ESC YGE 120 LVK
1 x ESC YGE 8 S
1 x Boat 140 mm
1 x Low line 74 mm
1 x Klumpblock (Plastik), Höhe 3 mm, 1 Rille, 20 Stück
1 x 25 mm fenders (10 pcs)
1 x Red spinner 45 mm
1 x Spare spinner 40/42 mm 3-Bl
1 x Spinner red 40-45mm
1 x 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller)
1 x 45 mm black plastic spinner for fixed propeller
1 x 3 mm Leader (L 100 mm)
1 x Spinner 3BL propeller pleg. 40 mm / 4,0 mm
1 x Cleat 15 mm (2 pcs)
1 x Boat 43 mm (5 pcs)
1 x Klumpblock (Plastik), Höhe 6 mm, 1 Rille, 20 Stück
1 x Electronic fog horn
1 x ALU servo arm 90º 3 mm shaft
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x 3,2 mm Prop Adapter M6
1 x Spare spinner 65 mm 3-Bl
1 x Servo GO-1081 MG 45 kg.cm 0.085s/60º
1 x ALU servo arm 3 mm shaft
1 x ALU double servo arm 3 mm shaft
1 x Klumpblock (Plastik), Höhe 8 mm, 2 Rille, 20 Stück
1 x Campana Ms 14 mm (5 pcs)
34,099.44EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies