Top » Catalog » Hardware » ABS/GFK/CFK plate » R1901832

20.20EUR

Peel ply 100 g/m² (plain weave) 50 cm x 2m
[R1901832]

Peel ply 93 g/m² (plain weave) 150 cm x 5 m

Peel ply has been well-known to aircraft construction for many years. The screen fabric produced using washed polyamide 6.6 (nylon) is applied as a final layer to the epoxy or polyester resin laminate. Following the increase in hardness or respectively before bonding the parts, the peel ply is peeled off („torn off”). This results in an overall rough, bondable upper surface free from lubricating film. Suitable for epoxy, vinyl ester and polyester resins.

Technical data:
Material: 100 % Nylon 6.6 (Polyamide), scoured, heat set finished, plain weave with red tracers every approx. 30 mm along the warp
Setting (Thr./cm): 21.5 x 20
Thickness: min. 0.18 mm
Melting point: 250 °C
Softening point: 235 °C
Tensile strength (CSN EN ISO 13934-1): Warp: min. 1320 N, weft: min. 1320 N

under request

Reviews

Customers who bought this product also purchased

Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish under request	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg under request	Breatex™ Non-woven absorber 300 g/m² Roll 41 m under request
Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg under request	Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) under request

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

16x8 BIELA propeller (3-blades) Pusher
68.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Brass control horn M2 long for wire (10pcs)
1 x	Horn 6/35 with M3 Bearing
1 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	20 mm carbon horn
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
2 x	Straightened rod Ø 0.8 mm x 1000 mm
2 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Bungee HLG Premium
2 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Horn for flap control (1 pcs)
1 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Horn DUBRO 1/2A
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	6 mm M3 variable horn
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Cable control set
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Threaded coupler M3 (10 uds)
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	20x1000 mm Ring Strap Back To Back
1 x	160 mm carbon undercarriage (2pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	PPM Encoder Module
1 x	TX 250 mW especial GOPRO
1 x	METEOR 1.000 mm kit
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x	Xplorer4 anemometro
1 x	Telemetry interface ALTIS 6 cm
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x	White gelcoat 1 Kg
1 x	Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x	Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x	Telemetry interface ALTIS 12 cm
1 x	Combustible Glow "KAVAN" air/heli 15% nitro
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Fiberglass plate 350x150x4.0 mm
1 x	Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x	PVC plate 320 x 194 x 0.23 mm (brown)
1 x	PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Indoor hinge with servo arm integraded
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Rudder forward 90x28 "type Kato"
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	5 mm M2 variable horn
1 x	5 mm M2 variable inclined horn
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Small control horn with bearing (2 pcs)
1 x	Horn mando small (2 pcs)
1 x	Fibra de vidrio 80 g/m² (10 m x 100 cm)
1 x	Peel ply 95 g/m² (plain weave) 100 mm x 100 m
1 x	Peel ply 100 g/m² (plain weave) 50 cm x 2m
1 x	Fiberglass plate 620x540x3,2 mm
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 10m
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Styrene plate 320x120x0.5 mm
1 x	Fibra de vidrio 80 g/m² (3 m x 100 cm)
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	PIT (Aero-Naut)
1 x	Antonov AN2 Scale 1/6 - 3m
1 x	Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish
1 x	Castrol Oil TTS 1l
1 x	CARBON CUB 15cc ARF 2280 mm
1 x	BOOMERANG II 40/46 ARF 1.55mm
1 x	VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit
1 x	L-39 Albatros 138"/3.5m lenght ARF
1 x	PARAGON Trainer 46-55 1580 mm
1 x	ODYSSEY ARF 2190 mm + Electric Landig Gear,COMBO
1 x	Carbon plate 350x150x0.5 mm
1 x	UHU Por 50ml/40g
1 x	Heat-conducting adhesive (2x2ml), WLK DK 4
1 x	CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9)
1 x	SkyMaxx 1.550 mm (kit)

17,968.49EUR