430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
      Futaba
      Graupner
      Jeti
      Jeti Accesories
      Multiplex
      Multiplex Accesorios
      PowerBox CORE
      RCM Pelikan
      Secraft
      Spektrum
      FrySky
    Receivers->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
2 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
2 x Aluminium coupler M3/2 with ball bearing (1 pcs)
2 x Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Black large kwik link (10 pcs)
1 x Cable coupler M2 (10 uds)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x 1 m servo "Premium" wire (white/red/blue)
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x 10m servo "Premium" wire (white/red/blue)
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Cable set PREMIUM , fuselage/wing one4one
1 x Black silicone 1,0 qmm wire (50 m)
1 x Cable set Premium™ MAXI "one4two"
1 x Protective Cover for wires Ø 3 mm 1000 mm
1 x 50m servo "Premium" wire (white/red/blue)
1 x 10 mm Quick clamp_L (6 pcs)
2 x Protective Cover for wires Ø 6 mm 1000 mm
1 x Blue silicone 0,5 qmm wire (50 m)
1 x 5 line servos wire black (1 m)
1 x Fiberglass heat shield Ø 6 mm 1000 mm
1 x Cable Cargador FUTABA
2 x Green silicone 0,25 mm² wire (25 m)
1 x 200m servo "Premium" wire (white/red/blue)
1 x Fiberglass heat shield Ø 4 mm 1000 mm
1 x Cable set PREMIUM, fuselage/wing
1 x Extension MPX-MPX 20 cm
1 x 20x1000 mm Ring Strap Back To Back
1 x 1/6 Pilot "Garry"
1 x Parachute BACKUP X100
3 x Blue smoke canister 140 g
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Extension 100 cm (Futaba)
1 x Painting GHT Lexan Black 150 ml
1 x Silicone 0,50 qmm servos wire Futaba (100 m)
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
2 x XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Parachute XTRALITE S
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Ball Link ALU M3 - RH (1 pcs)
2 x Kwik link AL M3 con Clip (2 pcs)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x Kwik link AL M4 con Clip (2 pcs)
1 x Cable coupler M2 (10 uds)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
2 x BALSA triangular 10x10x1000 mm
1 x SE Ring 360 mm (2 pcs)
1 x Foil for sticking flaps and ailerons
1 x Marker ties (20 pcs)
1 x A/C quality beech plywood 600x300x0.6 mm
2 x BALSA triangular 8x8x1000 mm
1 x Balsa panel 4.0x100x1000 mm
1 x Balsa panel 8.0x100x1000 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
2 x BALSA trip 4.0x4.0x1000 mm
2 x BALSA triangular 15x15x1000 mm
1 x Balsa panel 1.0x100x1000 mm
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Pin hinge 39x20 mm (10 uds)
1 x Pin hinge 26x11 mm (10 uds)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
3 x White smoke canister 140 g
1 x PCARD Wireless System
2 x Red smoke canister 65 g
2 x White smoke bombs AX-9 (10 pcs)
2 x Smoke set "S"
2 x AX-60 starters (5 pcs)
1 x Ball link Aluminio M3 (2 pcs)
1 x Silicone red 0,25 mm² wire (25 m)
1 x Silicone 0,50 qmm servos wire Graupner(100 m)
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x 6 mm Quick clamp_S (10 pcs)
1 x Fiberglass heat shield Ø 8 mm 1000 mm
1 x Silicone red 0,5 qmm wire ( 25 m)
1 x Silicone red 6,0 qmm wire (25 m)
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x Medium pin type hinge (12 uds)
1 x Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x Alu servo arm double RHINO
1 x Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro
1 x Metal clevis M2 (10 uds)
1 x White smoke canister 100 g
1 x Initior Transmitter FTX2 Wireless
1 x 25 mm reinforced hinge
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Large flex hinge (12 uds)
2 x Yellow smoke bombs AX-60 (5 pcs)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
2 x Black smoke bombs AX-60 (5 pcs)
2 x White smoke bombs AX-60 (5 pcs)
1 x Parachutist
2 x Blue smoke canister 100 g
2 x Ventral support for AX-18/AX-60
1 x Red smoke canister 140 g
1 x "M" set
2 x Green smoke canister 100 g
1 x Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs)
2 x Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs)
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x Pin to cable coupler M1,6 ⌀ (6 pcs)
1 x Pulley brass 12/2 (2 pcs)
1 x GPS V2 Sensor for M-LINK receivers
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Spray EC Red 400ml
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Interruptor SAFET-SWITCH 12HV Twinbatt
1 x SE Ring 330 mm (4 pcs)
1 x Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6
1 x Porta Kwik link M4 4 mm (2 pcs)
1 x Metal clevis M3 (10 uds)
1 x Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left
1 x Lite Plywood panel 600x300x3.0 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x Birch plywood plate 600x300x3.0 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Big-Malibu XL Roof box with surfboard rack GREY
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x Red smoke bombs AX-60 (5 pcs)
1 x Miniature brass strap hinge, 1 m
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Gates hinge aluminium (1 pcs)
2 x Remote electric ignition system
2 x Yellow smoke canister 65 g
2 x Wing tips support for AX-18/AX-60 (2 pcs)
1 x 18 mm reinforced hinge
1 x 3l Smoke oil
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Flap hinge (6 pcs)
1 x Green smoke canister 65 g
2 x Red smoke canister 100 g
1 x Pin type hinge Al 6x98 mm (2 pcs)
2 x B4-0 rocket charges (6 pcs)
1 x White smoke bombs AX-18 (5 pcs)
2 x Mixers smoke bombs AX-60 (5 pcs)
1 x Small pinned hinge (12 uds)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x White smoke bombs AX-3 (10 pcs)
2 x Initior Receiver FRX2 Wireless
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x AX-60 starters (5 pcs)
1 x Yellow smoke canister 140 g
1 x Yellow smoke canister 100 g
1 x "S" set for boats
1 x Electric rocket starters (6 pcs)
1 x "S" set for planes
1 x Green smoke canister 140 g
1 x Brake controller for 28 and 36 mm Brakes
1 x Ring support P-20 OPUS V-Jet 60mm
1 x 50N turbine start protection tube
1 x VIPER JET G2 Esq. 2 White/Red
1 x F-16 Scale 1/6 G3 Airex Deco: AF 916F
1 x Birch plywood plate 600x300x1.2 mm
1 x Motor OS MAX 120 AX
1 x Motor OS MAX 160 AX
12,086.60EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies