1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Jeti Black cap
2 x Big Crow DLE-170M
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x ABS tube 4.0x3.0x1000 mm
2 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
2 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
2 x ABS tube 10.0x8.0x1000 mm
2 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x ABS tube 18.0x16.0x1000 mm
3 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x ABS tube 6.0x4.0x1000 mm
1 x ABS tube 9.0x8.0x1000 mm
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
2 x ABS tube 3.0x2.0x330 mm
1 x ABS tube 7.0x6.0x1000 mm
1 x ABS tube 20.0x18.0x1000 mm
1 x ABS tube 2.0x1.0x1000 mm
2 x ABS tube 14.0x10.0x1000 mm
1 x ABS tube 16.0x14.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
2 x Motor DLE 200cc Premium Muffler
1 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x ABS tube 3.0x1.0x1000 mm
1 x Motor DLE 430 cc - Paramotors
1 x Small Crow DLE-170M
1 x ABS tube 7.0x5.0x1000 mm
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x Cut tube
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x 2,0x50 mm allen screwdriver
1 x Hexagonal ball head 2.0 x 50 mm
1 x 
2 x 3,0x60 mm allen screwdriver
1 x Copier 5x20 cm pcs
1 x Ball Link Plier
1 x 
2 x Starter Sullivan-STAR 603 DINATRON
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Wing connector 8pin with pin strip, plug & socket
1 x PVC 0,35 qmm servos wire Graupner (100 m)
1 x BALSA trip 2.0x10.0x1000 mm
1 x Wing OXY 5,0 m2
1 x Beech dowels 3.0 x 1000 mm
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x Suncover 100cc Red
1 x Motor DLE 200cc Std
2 x Support FUEL DOT V3
2 x Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
2 x Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
3 x Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
2 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m)
2 x METEOR 1.000 mm kit
1 x Tank GFK Opus/JEt 300 ml
1 x F-16 Scale 1/6 G3 Airex Deco: AF 916F
2 x RANGER Jet NAVY 1.854mm combo
1 x RANGER Jet Red/White 1.854mm combo
1 x Boomerang SPRINT V2 Red/White/Blue
1 x TURBINATOR 2 RED/WHITE 1778 mm Combo
1 x TURBINATOR 2 ORANGE/SILVER 1778 mm Combo
1 x Silent-blocks DLE 170M
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Jodel D.9 BeBe 2.400 mm Kit
1 x ABS tube 5.0x4.0x156 mm
1 x ABS tube 9.0x7.0x1000 mm
1 x CNC FPV Display screen&Transmitter Holder Vertical
1 x Extractor piñones 2.3/3.2 mm
1 x 
1 x Hot Glue Stick BLACK
1 x Pistola termica MH 550 micro
1 x Starter 12v (Max 90 and 15ccm)
1 x Tool for entel
1 x Starter EM Gear Power 250
1 x Tachometer Hyperion Multi-pala
1 x Boxed KIT OF 7 Rotary Burrs FINE
1 x Vacuum pump 12 CFM
1 x Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x Soldering tip for KAVAN soldering iron KAV66.8338
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Screw-lock connector M2 (2 uds)
1 x Pump hose (Ø 6/8 mm) transparent
1 x Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x Steel brush wheel with 2.35mm
1 x Smart Soldering Iron 110W/230V AC
1 x Heat Seal Iron
1 x Copier 2x20 cm pcs
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x Starter EM Gear Power 80
1 x 2,5x60 mm allen screwdriver
1 x Screwdriver for Hexagon 1,27mm
1 x Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x Support Filtro FESTO
1 x Support conector MPX (6 pcs)
2 x Support Flush MPX Conector (6 pcs)
1 x Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm)
1 x Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
1 x Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
2 x Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x Support XT60 conector (2 pcs)
1 x Tapa estado carga XT-60 (6 pcs)
1 x Angle support XT60 conector
1 x Soporte grifo FESTO (2 pcs)
1 x Recessed MPX connector support (6 pcs)
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Tube support Ø 6mm (10 pcs)
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Support pumb/filter Xicoy X45
1 x Support Pitot JETI
3 x Xoar Electric Beechwood Prop 12x6
1 x Xoar Electric Beechwood Prop 15x8
1 x Xoar Electric Beechwood Prop 22x10
1 x Xoar Electric Beechwood Prop 16x7
1 x Xoar Electric Beechwood Prop 21x10
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
2 x Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm)
1 x CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm)
1 x CF tube set (Ø 38 mm y Ø 14 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm)
1 x Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
2 x Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm)
1 x SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x EDGE 540-A 105" (2660 mm)
1 x 50N turbine start protection tube
1 x Colador RABBIT
1 x Electric starter BEE (old)
1 x Ring support P-20 OPUS V-Jet 60mm
1 x Turbina X132 H "Light Version"
1 x BD-5 Pro ARF
1 x SLICK 360-A 104" (2640 mm)
1 x Boomerang ELAN STARS & STRIPES Combo
1 x 34 mm Alu spinner 3.17 mm pleg. propeller
1 x 50x45 mm micro-mini servo cover
1 x Turbine RABBIT 100 SE 11 Kg
1 x Antonov AN2 Scale 1/6 - 3m
1 x Turbine HORNET 85 SE
1 x FELIX JR Red/Yellow 1750 mm
1 x PC-21 2880 mm Propeller 5 blade 20x10 K45TP Scale composite
1 x Digital weight, angle and balance meter BASIC
1 x Adaptador equilibrador HITEC (XH)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Bidule 55 V3 2460 mm
1 x Albatros red/white (Top Model)
1 x BRASS CONTROL HORN M3x16 mm 2pcs
1 x BULLIT Wing 1095 mm
1 x Cable video GoPro and 5V cable
1 x Motor DLE 170 M- Paramotors
1 x Anntena Panel 5,8 GHz - 14 dBi
1 x Sealing Iron Profi LCD
1 x FELIX SportJet Blue 2200 mm
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x FELIX JR Yellow/Black 1750 mm
1 x MB339 CAMUFLAGE PNP 1790 mm
1 x LENTUS Multiplex Propeller 8x6
1 x Multiplex True Air Speed + Vario Sensor to M-LINK
1 x Avia spare fouselage CF reinforced (Top Model)
1 x LiPo Storage Box Type "BIG"
1 x Black silicone 0,25 mm² wire (25 m)
1 x 3 LiPo XH>EH adapter
1 x 4 LiPo XH>EH adapter
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Tool for entel
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
1 x White silicone 0,25 mm² wire (25 m)
1 x Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro
1 x Variable Flow Smoke Pump System
1 x Junta humo metalica G20 (DLE20/DLE20RA/DLE40)
1 x Sparkplug DLE CM6
1 x DLE 30 complete electronic ignition
1 x GLOW 5C + accesories
1 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x ABS tube 8.0x6.0x1000 mm
1 x ABS tube 8.0x7.0x1000 mm
1 x ABS tube 4.0x2.0x1000 mm
1 x Junta humo metalica G30 (DLE30/DLE60)
1 x DLE Ignition unit
1 x Recess mount-rem. glow plug set
1 x Spark plug key NGK MVVS
1 x RCEXL Electronic ignition twin CM-6
1 x Soporte filtro FESTO (4 pcs)
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
1 x EXTRA 300L 1.2 m Blue
60,824.31EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies