Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Brazo servo MKS Doble Metal L:2.5/3 inc
26.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Carbon fiber rod 1.0 mm x 1000 mm
2 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
2 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
2 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
2 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Carbon fiber rod 6.0 mmx1000 mm
2 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Canopy Lock V1 M3 Red (2 pcs)
2 x	Steering arm 16 mm Ø 4 mm
3 x	Canopy Latch
1 x	PT 20x13 EL Propeller
2 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
2 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Covered closure or fairings
2 x	Locking cable tie 3.2x142 (uds)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	PT 21x13 EL Propeller 3 Blade
3 x	Steering arm 12 mm Ø 3 mm (2 uds)
2 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
3 x	Aluminium alloy coupler for carbon tube 6/M4
2 x	Propeller MEJZLIK 22x10 Electric light (36 g)
1 x	Propeller MEJZLIK 20x13 Electric light (41 g)
1 x	Xoar Electric Beechwood Prop 24x8
2 x	Xoar Electric Beechwood Prop 20x10
3 x	Xoar Electric Beechwood Prop 15x8
2 x	Xoar Electric Beechwood Prop 22x10
2 x	Xoar Electric Beechwood Prop 16x7
1 x	Xoar Electric Beechwood Prop 12x6
1 x	Xoar Electric Beechwood Prop 21x10
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Propeller APC 10x6 Electric Pusher
1 x	Tube support Ø 6mm (10 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	11 mm Rubber pads (14 pcs)
1 x	250 mm / 16 mm Airbrakes
3 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Cable tie mounts 4.3 (4 uds)
2 x	Electric spoiler 250 mm (2 pcs)
2 x	Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs)
1 x	Cabin latch Fox MDM1 4m (pair)
2 x	Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
1 x	140 mm rods set for direction control
2 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs)
1 x	Triple rod con. 3mm Pushrod (2 pcs)
1 x	Pushrod greyline 3/2 with coupler M2 L: 1000 mm
2 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Pushrod greyline 3/2 with coupler M3 L: 1000 mm
1 x	Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x	Cockpit aluminium closing
1 x	Wing bolts M6 Steel screw Blue (2 pcs)
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
2 x	Wheel collar 6 mm Ø (4 uds)
2 x	Allen wheel collar M3x5
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Couple M4 for wire (10 pcs)
1 x	Allen wheel collar M3x3
2 x	Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x	Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x	Cockpit plastic closing
2 x	Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs)
1 x	Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x	Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x	Snap pin for micro clevis (10 uds)
1 x	Snap long M2 (10 uds)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled
1 x	Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x	Adapter 3,2 mm M6
1 x	Landing gear frontal support 29x26x13,5
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Snap short M2 (10 uds)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Servo TOPMODEL STANDARD S3217
1 x	Servo TOPMODEL DS1413 T
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	65 mm mini servo cover
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
2 x	Tip wing protector 28x10x12 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs)
1 x	30 mm gas motor standoff
1 x	10 mm floating pad (72 pcs)
1 x	Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x	90x75 mm standart servo cover
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Allen wheel collar M4x6
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Wheel collar 3.5 mm Ø (4 uds)
1 x	Lead with adhesive (2 pcs)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	SUS wire 3m (nylon coated)
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	Servo TOPMODEL DS9010 T
1 x	Servo BLUE Bird BLS-H71B v2
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Servo BLS-M55B 61.2kg
1 x	SSPS105 Super Hi-Power servo
1 x	Pushrod octagone 4/3
1 x	10-15mm Servo Arm HITEC
1 x	Window mounting channel 5m
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Pushrod greyline 3/2 with coupler M2
1 x	Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs)
1 x	Cockpit latch closing I=10 mm
1 x	Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs)
1 x	Cockpit aluminium closing 5.4g
1 x	12 mm floating pad (49 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	aluminium servo arm V1-JR 1,0 inch M2
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	20x1000 mm Ring Strap Back To Back
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	40 mm gas motor standoff
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	5 mm gas motor standoff
1 x	Buy Perforated film 100 cm / 20 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	45 mm gas motor standoff
1 x	10 mm gas motor standoff
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Aluminium ignition bad (blue)
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Black large kwik link (10 pcs)
1 x	Small kwik link (10 pcs)

4,449.38EUR