Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

VSpeak ECU converter KingTech
79.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Extractor piñones 2.3/3.2 mm
1 x	Acople ALU M3 Ø 6 (2 uds)
1 x	Horn aluminio negro LH largo L31xH30 (2pcs)
1 x	Modulo PPM Encoder
1 x	PIX Hawk con accesorios
1 x	Horn corto de latón M2 para cable (2 pcs)
1 x	Horn de mando 6/35 con rótula M3
1 x	Horn corto de latón M3 para cable (2 pcs)
2 x	Acople ALU Izda. M3 Ø 4 (2 uds)
3 x	Acople ALU M2,5 Ø 6 (2 uds)
1 x	Cable con accesorios
2 x	Acople ALU M2 Ø 3 (2 uds)
1 x	Horn 16,5x20 mm (2 pcs)
2 x	Horn de mando carbono 20 mm
1 x	Horn de mando 5/20 con rótula M2
2 x	Horn aluminio RH largo (2pcs)
1 x	Varilla carbono 12 mm x 1000 mm
1 x	Varilla carbono 0.5 mmx1000 mm
3 x	Varilla carbono 2.5 mmx1000 mm
2 x	Varilla carbono 16 mm x 1000 mm
2 x	Varilla carbono 20 mmx1000 mm
1 x	Varilla carbono plana 10.0 x 1.0 x 1000 mm
1 x	Varilla carbono 0.5 mmx1000 mm
2 x	Varilla carbono plana 1000x3.0x0.5 mm
2 x	Varilla carbono 3.0 mm x 1000 mm
1 x	Varilla carbono 10 mm x 1000 mm
1 x	Varilla carbono 1.5 mm x 2000 mm
2 x	Varilla carbono plana 3.0 x 1.0 x 1000 mm
1 x	Varilla carbono 1.0 mm x 1000 mm
1 x	Varilla carbono 1.5 mm x 1000 mm
1 x	Rótula MAXI con bola/tornillo M3 (2 uds)
1 x	Rótula con rodamiento M2 22x5,5
1 x	Rótula V3 aluminio M2,5 Diam (2 pcs)
1 x	Rótula V1 corta M2/M1,6 3Diam negra (2 pcs)
1 x	Rótula con rodamiento M2,5 22x5,5
1 x	Rótula larga M3 con bola/tornillo (6 uds)
1 x	Rótula metálica M3/3 azul (2 pcs)
2 x	Rótula larga M3 con bola/base, tornillo y tuerca (6 uds)
1 x	Rótula con bola M3 (10 pcs)
1 x	Tubo ABS 18,0x16,0x1000 mm
1 x	Tubo acero (L 1000 mm, Ø4 mm, Ø3,7 mm)
1 x	Tubo ABS 10,0x8,0x1000 mm
3 x	Tubo acero (L 1000 mm, Ø3 mm, Ø2,7 mm)
1 x	Tubo ABS 9,0x7,0x1000 mm
1 x	Tubo aluminio (L 1000 mm, Ø7,0 mm, Ø6,1 mm)
1 x	Tubo ABS 16,0x14,0x1000 mm
2 x	Set de tubos de carbono (Ø38 mm y Ø14 mm)
2 x	Tubo acero (L 1000 mm, Ø10 mm, Ø9,7 mm)
1 x	Tubo ABS 4,0x2,0x1000 mm
1 x	Tubo ABS 6,0x4,0x1000 mm
1 x	Tubo acero (L 1000 mm, Ø6 mm, Ø5,7 mm)
1 x	Tubo acero (L 1000 mm, Ø9 mm, Ø8,7 mm)
1 x	Tubo ABS 5,0x4,0x1000 mm
1 x	Tubo ABS 2,0x1,0x1000 mm
1 x	Tubo acero (L 1000 mm, Ø7 mm, Ø6,7 mm)
1 x	Tubo ABS 8,0x6,0x1000 mm
2 x	Tubo ABS 8,0x7,0x1000 mm
1 x	Tubo ABS 6,0x5,0x1000 mm
1 x	Tubo aluminio (L 1000 mm, Ø4,0 mm, Ø3,1 mm)
1 x	Tubo ABS 9,0x8,0x1000 mm
2 x	Tubo acero (L 1000 mm, Ø5 mm, Ø4,7 mm)
1 x	Tubo ABS 4,0x3,0x1000 mm
1 x	Tubo acero (L 1000 mm, Ø8 mm, Ø7,7 mm)
2 x	Cámara Sony 4140+673 CCD Board con emisor 5,8 GHz 200mw + antena
1 x	Prolongador S-Bus 1-2 silicona 120 cm
1 x	Prolongador cable servo 0,14 PVC, conector ZH micro
1 x	Catapulta Vasa model
1 x	Prolongador silicona 10 cm (Futaba)
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	Hélice POWER-PROP 14x9
1 x	Arandela conica ancha alumino M3 oro (4 pcs)
1 x	Varilla acero Ø 1,2 mm x 1500 mm
1 x	Conector 5,0 mm EC5 macho con funda (2 pcs)
1 x	Conector BEC hembra (10 pcs)
1 x	Brazo direccional 16 mm Ø 4 mm ( 2 uds)
1 x	Varilla mando roscada M2,5 (2 uds)
1 x	T-shape holder metal LAMA
1 x	Horn largo de latón M4 para cable (4 pcs)
1 x	Horn aluminio roscado 6 mm con rótula
2 x	Horn de mando largo con rodamiento (2 ud)
1 x	Horn corto de latón M4 para cable (10 pcs)
2 x	Horn largo 50x26
2 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
3 x	Horn mando small (2 pcs)
1 x	Set acople ALU M2,5 Ø 4 (2 uds)
1 x	Horn de mando 5/10 con rótula M2
1 x	SistemaLDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 mm
1 x	Horns indoor
1 x	Horn aluminio anodiazado 6 mm rojo con rótula
2 x	Set bisagras indoor con horns integrados
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Horn aluminio pequeño azul (2pcs)
1 x	CORTEX
1 x	Varilla carbono plana 1000x3.0x1.0 mm
1 x	Bayoneta de carbono 13,4 mm Ø 0,48 mm
1 x	Varilla carbono plana 1000 x 5.0 x 1.0 mm
1 x	Sistema salvaservos rueda delantera BIDULE 55
1 x	Sistema salvaservos rueda delantera BIDULE 111
1 x	Transmision funda/varilla octog. plastica 4/3 porta kwik link M3
1 x	Soporte abrazaderas 4.3 (4 uds)
1 x	Transmision funda/varilla greyline plastica 3/2 kwik link M2 100
1 x	Crimping sleeves para cables de 1.1 mm (10 pcs)
1 x	Acoplador "Z" Ø 2 (2 uds)
1 x	Ball link aluminio M3 V1 rojo (10 pcs)
1 x	Antonov AN2 Scale 1/6 - 3m
1 x	Tubo carbono 3K-PW (Ø25 mm, Ø22.5 mm L:2000 mm)
2 x	Tubo de latón (L 1000 mm, Ø4,0 mm, Ø3,1 mm)
1 x	Tubo carbono conico 3K 10x5x0.3 x 880mm
1 x	Tubo carbono 3K-PW (Ø40 mm, Ø36 mm L:2000 mm)
1 x	Tubo de latón (L 1000 mm, Ø8,0 mm, Ø6,1 mm
1 x	Tubo carbono (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Tubo de latón (L 1000 mm, Ø2,0 mm, Ø1,2 mm)
1 x	Tubo aluminio (L 1000 mm, Ø3,0 mm, Ø2,1 mm)
1 x	Tubo de latón (L 1000 mm, Ø3,0 mm, Ø2,1 mm)
4 x	Camara 800 TVL CMOS para FPV
1 x	Prisionero 5 mm Ø (4 uds)
1 x	Protector punta ala 38x10x12 (2 pcs)
1 x	Prisionero aluminio 6 mm Ø (4 uds)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 6 m
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x	Horn de mando pequeño ajustable aluminio con rodamiento 2,8x15
1 x	Cono Aluminio hélice fija 30 mm diámetro / eje 2,3 mm
2 x	Horn de control para SlowFlyer (3 pcs)
1 x	Unidad EVP para AXI2208/xx y 2212/xx
1 x	Reenvío de Profundidad 80x28 mm "tipo Kato"
1 x	Clevis con trasmisión M3
2 x	Horn de mando variable inclinado 6 mm M3
1 x	Horn de mando corto ajustable 3x24
1 x	Horn largo de latón M2 para cable (10 pcs)
1 x	Cono plástico negro hélice fija 42 mm diámetro
2 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 4 m
1 x	Cono plástico blanco hélice fija 50 mm diámetro
2 x	Horn micro (2 pcs)
1 x	Cono plástico blanco hélice fija 42 mm diámetro
1 x	Cono plástico rojo hélice fija 36 mm diámetro
1 x	Acople ALU M2,5 Ø 4 (2 uds)
1 x	Cono plástico negro hélice fija 50 mm diámetro
1 x	Horn con ball 55x40
1 x	Horn micro T2 Ø 1 (2 uds)
1 x	Acople ALU M2,5 Ø 3 (2 uds)
2 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x	Reenvío de Profundidad 70x28 mm "tipo Kato"
1 x	Cono NUT M4
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x	Rueda KOVO SLH 120x60 mm
1 x	GPS Expander Module
1 x	Rotula 6 mm hexagonal con bola M3 (10 pcs)
1 x	AXI 2808/20 V2 Eje largo
1 x	Anillo de potencia para 2020
1 x	Hélice sistema de paso variable 9" para Axi VPP (recambio)
1 x	Varilla carbono 6.0 mmx1000 mm
1 x	Horn DUBRO 1/2A
1 x	Horn de mando duraluminio F3A 30x10x23,5 mm (2 pcs)
1 x	Adaptador BlueCom™ (Android / WP)
1 x	Rótula INDUSTRIAL con bola M3 (2 uds)
1 x	Rótula 6 mm con bola M3 (10 pcs)
1 x	Adaptador prision. 6 mm/M8 "long" 35 mm
1 x	AXI 2826/12 V2 Eje largo
1 x	Bateria LiFe TopFuel 3100 mAh 2s MTAG 30C
1 x	AXI 2814/10 V2
1 x	AXI 2808/16 V2 Eje largo
1 x	AXI 2814/10 V2 Eje largo
1 x	Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x	AXI 2808/20 V2
1 x	AXI 2814/16 V2
1 x	AXI 2820/12 V2
1 x	AXI 4120/14 V2
1 x	AXI 4120/18 V2
1 x	AXI 2820/12 V2 Eje largo
1 x	AXI 2814/20 V2
1 x	AXI 2814/20 V2 Eje largo
1 x	AXI 2808/16 V2
1 x	Bateria LiFe TopFuel 3100 mAh 4s MTAG 30C
1 x	AXI 2814/12 V2 Eje largo
1 x	AXI 2814/16 V2 Eje largo
1 x	AXI 2814/12 V2
1 x	AXI 2820/14 V2
1 x	Adaptador para montar reductora VMKG en motor 480
1 x	Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora
1 x	AXI 2826/10 V2
1 x	AXI 2820/10 V2 Eje largo
1 x	AXI 2820/10 V2
1 x	Adaptador 8 mm para AXI53xx
1 x	AXI 2820/12 CYCLONE
1 x	Frontal con imanes para 2020/20
1 x	Bateria LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x	Tubo de latón (L 1000 mm, Ø10,0 mm, Ø9,1 mm)
1 x	Servo KST X06H - 1.8Kg.cm 7mm 6g
1 x	Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x	Servo KST X10 V2.0 ala 10mm 28g 10.8Kg

6,818.56EUR