Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Opto Gas Engine Kill Switch temporarily out of stock	Propeller MENZ-S 17x10 temporarily out of stock	Propeller MENZ-S 18x12 temporarily out of stock
Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	Propeller MENZ-S 20x10 temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Controlador tren/frenos ER-150 V2
55.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	14 mm portholes (10 pcs)
1 x	"S" set for boats
1 x	10 mm dogdrive props
2 x	29,0 mm propeller (rigth propeller)
1 x	25,0 mm 3-BL M4 hydro-propeller (left hydropropeller)
1 x	270 mm 3/3 mm shaft ship
1 x	290 mm 290 mm M5x18 mm shaft ship
1 x	28 mm turnbuckle
1 x	31,0 mm propeller (rigth propeller)
1 x	12 mm mast holder
1 x	290 mm M4/M4 6.0x4.0 mm shaft ship
1 x	10 mm portholes (10 pcs)
1 x	25 mm fenders (10 pcs)
1 x	261 mm M4/M4 6.0x4.0 mm shaft ship
1 x	3 mm Leader (L 100 mm)
1 x	14 mm Portholes for screws (10 pcs)
1 x	33,0 mm propeller (rigth propeller)
1 x	290 mm M4 7/8x212 mm shaft ship
1 x	12 mm dogdrive props
2 x	La Capitania di Venetia 1:50
1 x	SCHARNHORST Battleship 1:200
1 x	Liferaft 47 mm
1 x	Coupling for 4 mm axis
1 x	Strut M 1:25 3D (30 pcs)
1 x	290 mm M5 Prop shaft
1 x	Tirpiz Battleship 1:200
1 x	250 mm / 16 mm Airbrakes
1 x	29,0 mm propeller (left propeller)
1 x	120x60 mm SLH KOVO wheel
1 x	12x6 tree blades propeller
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	16x10 tree blades propeller Master Airscrew
1 x	25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x	Oracover Black 2 m
1 x	ORACOVER Fluor red (2 m)
1 x	MYLAR film A350 (1000x500 mm)
1 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Jodel D.9 BeBe 2.400 mm Kit
1 x	Beech dowels 2.0 x 1000 mm
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	Decorative caps, multicoloured, short
1 x	Flap hinge (6 pcs)
1 x	Fibreglass-Spinner BS ∅155 x 200 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Distanzstück motor OS 120 AX
1 x	Canopy Latch
2 x	Beech dowels 3.0 x 1000 mm
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Charger LiPo Charger4
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	Foam plastic plates (310x210x2 mm)
1 x	Foreman, scale 1:32
1 x	Decorative caps, multicoloured
2 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Conector JAPAN G2 Set 5 pares
1 x	28 mm tailwheel unit
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	40,0 mm hydro-propeller (left hydropropeller)
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Aluminium sheet 500x250x0,5mm
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	3,2x1000 mm 2:1 black termoretract tube
1 x	Spinner 3BL propeller pleg. 42 mm / 6,0 mm
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Head core
1 x	Rotor Mast
1 x	Head spacer
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Aramid 50 daN 50 m
1 x	36 mm red plastic spinner for fixed propeller
1 x	Spare spinner 65 mm 3-Bl
1 x	Spinner 3BL propeller pleg. 36 mm / 6,0 mm
1 x	Spinner plastic balck propeller pleg. 30 mm / 3,2
1 x	Spinner 3BL propeller pleg. 36 mm / 4,0 mm
1 x	Head core bushing
1 x	Head lower part
1 x	Cierva C30 spanish decoration Stickers
1 x	Head runner
1 x	LUCAS pilot ARTF
1 x	Opale Rucksack
2 x	Wing OXY 5,0 m2
1 x	Trike XL motor set (motor+esc+prop)
1 x	Paramotor BackPack XXS 2
1 x	Esc KOSMIK 200+ HV
1 x	JIVE 80+LV Esc
1 x	JIVE 80+HV Esc
1 x	ESC KOLIBRI 140 HV-I
1 x	Esc KOSMIK 210 HV-I COOL
2 x	KIRA 600-17
2 x	KIRA 480-43 5,2:1
2 x	PYRO 800-40 Long Axi
2 x	PYRO 900-52L
1 x	KIRA 400-34
1 x	Foam plastic plates (310x210x8 mm)
1 x	Landing gear strap large (4 uds)
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x	Quick hose connector 6-6 mm
1 x	Propeller MENZ-S 18x10
1 x	Propeller MENZ-S 20x8 Pusher
1 x	Propeller MENZ-S 15x8 3 blades
1 x	Propeller MENZ-S 21x8
1 x	Propeller MENZ-S 18x6
1 x	FALCON 33X11W CARBON PROPELLER (GAS)
1 x	FALCON 20X9 CARBON PROPELLER (GAS)
1 x	Propeller MENZ-S 18x10 3-Blades
1 x	Propeller MENZ-S 21x12
1 x	FIALA Propeller 24x12
1 x	22x8 BIELA propeller
1 x	Propeller MENZ-S 17x8
1 x	FALCON 24X9 CARBON PROPELLER (GAS)
1 x	JIVE 120+HV Esc
1 x	KIRA 600-20 6,7:1
1 x	PYRO 800-48 Long Axi
1 x	KIRA 480-38 5,2:1
1 x	PYRO 750-50L
1 x	KIRA 480-38
1 x	KIRA 600-24 6,7:1
1 x	KIRA 480-34
1 x	PYRO 700-45
1 x	PYRO 600-11
1 x	KIRA 480-31 5,2:1
1 x	KIRA 600-30 6,7:1
1 x	Propeller APC 12x6 Glow/Gas
1 x	Propeller APC 12x10 Glow/Gas

14,971.96EUR