4.50EUR

CA Glue fast 20g
[R1501032]


CA Glue fast 20g
Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Sparkplug NGK CM6
Sparkplug NGK CM6

temporarily out of stock
temporarily out of stock

TYGON tubo 1 m Diam. 3.4 x 2.0  mm
TYGON tubo 1 m Diam. 3.4 x 2.0 mm

temporarily out of stock
temporarily out of stock

Tygon tube 6.35 - 3.18 mm 1m
Tygon tube 6.35 - 3.18 mm 1m

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 23x8
Propeller MENZ-S 23x8

temporarily out of stock
temporarily out of stock

CA Glue (medium) 20g
CA Glue (medium) 20g

temporarily out of stock
temporarily out of stock

Conector BEC male (10 pcs)
Conector BEC male (10 pcs)

temporarily out of stock
temporarily out of stock

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x 18 mm reinforced hinge
1 x Flap hinge 33x9 mm (6 pcs)
2 x Long pinned hinge (6 uds)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
2 x Nylon hinge 15x0,3 (10 pcs)
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
2 x Small pinned hinge (12 uds)
2 x Micro flex hinge (12 uds)
2 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
2 x 15 mm reinforced hinge
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x Pin type hinge Al 4,5x70 mm (2 pcs)
3 x Miniature brass strap hinge, 1 m
1 x Fast'n EZ-CA-Hinge (12 uds)
2 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
2 x Gates hinge black 30x16 mm (2 pcs)
2 x Glases Aspen
2 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x Canopy Latch
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Covered closure or fairings
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Electric spoiler 250 mm (2 pcs)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x One touch canopy lock
1 x Steering arm 12 mm Ø 4 mm
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x XH female balance (4S) connector (2 pcs)
1 x Conector Servo female 4 pines
1 x Connectors banna oro 6,0 mm (M/F)
2 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x XH male balance (5S) connector (2 pcs)
1 x Banna gold connector 2,5 mm (M/F)
1 x XH male balance (4S) connector (2 pcs)
2 x XH female balance (3S) connector (2 pcs)
1 x Connectors banna oro 2 mm (M/F)
1 x Connector CAN 15
1 x Conector BEC male (10 pcs)
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Prolongador S-Bus JR/JR 10cm
2 x Extension silicon 30 cm male (Futaba)
1 x Cabel "Y" 30 cm (graupner)
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Circlick securite
1 x 200 mm extensión servo HITEC/JR
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Futaba male 40 cm extension
1 x Extension silicon 30 cm female (Graupner)
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Cable S.BUS 3 salidas 300 mm
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Extension 30 cm (Futaba)
1 x Extension silicon 10 cm (Futaba)
1 x Extension silicon 30 cm female (Futaba)
1 x Premium servo extension 25cm
1 x Extension silicon 100 cm (Futaba)
1 x Premium servo extension 75cm
2 x Extension 100 cm (Futaba)
1 x Futaba Female 40 cm extension
1 x Extension lead 15 cm Multiplex
1 x BALSA triangular 15x15x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x DUPLEX R12 receiver REX Assist
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x ROBART POINT HINGE 4,7mm (5 pcs)
2 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
2 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
3 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Red aluminium servo arm V3-Futaba 1,0inch
1 x Blue aluminium servo arm V3-Hitec 1,0inch M3
1 x Gates hinge aluminium (1 pcs)
2 x Servo GO-09 9g
1 x 3,9 mm ZG20-ZG38 servo arm
1 x Gold aluminium servo arm V2-JR 1,0" inch M3
1 x Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x Extension silicon 50 cm (Graupner)
1 x Extension silicon 75 cm (Futaba)
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Blue aluminium servo arm V1-Hitec 20 mm M2
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Servo GO-10S41MG 10.5 kg.cm 0.075s/60º
1 x Servo Mount S (red)
2 x 120x60 mm SLH KOVO wheel
1 x Red aluminium servo arm V2-Futaba 1,75" inch M3
1 x Red aluminium servo arm V3-Futaba 1,5inch M3
1 x Servo GO-1081 MG 45 kg.cm 0.085s/60º
1 x Servo SAVOX SB-2290 SG
1 x Cable grommet Ø 5 mm (4 uds)
1 x Servo MKS HV6130
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Servo lock HS-80/81/82/85 (2 pcs)
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Cable grommet 9.5 mm (4 uds)
1 x Servoholder Dymond DS 1800 MG Digital (2 pcs)
2 x Glases Ace
1 x Glases Moritz
1 x Wheel collar 6 mm Ø (4 uds)
1 x ALU servo arm 90º 3 mm shaft
1 x Glases Nimbus "Black"
1 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x Triple rod con. 2mm Pushrod (2 pcs)
1 x 80 mm rods set for direction control
1 x Servo Robbe FS 128 BB MG HV Digital
1 x Brazo servo aluminio HITEC HS-125MG/5125MG
1 x Servo MKS 6100 DS
1 x Servo HITEC HS-5585MH
1 x Clip fixing for wing (2 pcs)
1 x Wheel collar 2 mm Ø (4 uds)
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x Servo MKS HV69
1 x Servo SAVOX SV-1261 MG
1 x 45 mm rods + T patellas set for direction control
1 x Servo SAVOX SA-1258 TG
1 x 140 mm rods + T patellas set for direction control
1 x Servo HITEC HS-485 HB
1 x Servo HITEC D85 MG
1 x Glases Nimbus
2 x Wheel collar 3.5 mm Ø (4 uds)
1 x Servo HITEC D951 TW
1 x Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x HITEC DPC-11 programmer
1 x Servo SAVOX SV-1254 MG HiVolt Low Profile
1 x "L" servo arm 65x49 mm (2 pcs)
1 x Piñones SAVOX SH-0350
1 x Savox Brushless Servo SC-1251 MG
1 x STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x Tip wing protector 30x10 (2 pcs)
1 x 38x4,5 mm wires output (2 pcs)
1 x Alu servo arm double RHINO
1 x Servo MKS HBL380
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x XH female balance (9S) connector (2 pcs)
1 x Wing connector 8pin with pin strip, plug & socket
1 x Connectors MPX black male
1 x Mounting frame MPX female connector
1 x XH female balance (7S) connector (2 pcs)
1 x XH LiPo extension lead
1 x MPX PCB "4 Pins", 5 pieces
1 x Connectors MPX male
1 x XH male balance (3S) connector (2 pcs)
1 x Wing connector 8pin with pin strip, plug & socket
1 x 5 line servos wire black (1 m)
1 x XT-60 connector (female)
1 x Connectors DEANS (T)
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x Red 3m5 mm connector holder
1 x Protector Connector Dean-T (1 pair)
1 x Protector Connector MPX (1 pair)
1 x Connectors MPX female
1 x Connectors banna oro 8,0 mm (M/F)
1 x XH male balance (6S) connector (2 pcs)
2 x Connectors MPX 8 pins with support (black) 1 pair (male-female)
1 x XH male balance (2S) connector (2 pcs)
2 x Connectors MPX male (PIN double)
1 x PPM Encoder Module
1 x Shaft sleeve LAMA
1 x Premium servo extension 50cm
1 x Couple M4 for wire (10 pcs)
1 x Adapter 5,0 mm M8
1 x Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
2 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Locking cable tie 2.5x100 (uds)
1 x Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x Adapter 3,2 mm M8
2 x Medium pin type hinge (12 uds)
1 x Red aluminium servo arm V3-Futaba 3-3,5inch
1 x VBar Control RX-Satellite
1 x Extension silicon 30 cm male (Graupner)
1 x Locking cable tie 4.6x203 (uds)
1 x Extension MPX-MPX 20 cm
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Gold aluminium servo arm V1-JR 1,25" inch M3
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Gates hinge
1 x Pin hinge 34x16 mm (10 uds)
1 x Red aluminium servo arm V2-Futaba 1,25" inch M3
1 x Blue aluminium servo arm V1-Hitec 1,25" inch M3
1 x Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A
1 x Red aluminium servo arm V3-Futaba 3,5inch
1 x Blue aluminium servo arm V2-Hitec 2,0 inch M3
1 x Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x Servo AN-20 MGBBA
1 x Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x Servo KST X20-7512 V8.0 82kg 8.4v
1 x Pushrod greyline 3/2 with coupler M2 L: 1000 mm
1 x Servo HITEC HS-65 HB
1 x Servo HITEC HS-53
1 x Servo HITEC HS-5245 MG Digi
1 x Wheel collar 5 mm Ø (4 uds)
1 x Split M1,2x10 (10 pcs)
1 x Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x DUPLEX R6 EX receiver 2,4GHz
1 x MPX Sub-D Adaptor
4,104.94EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies