Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

PowerBox SparkSwitch RS unregulated
69.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
3 x	Aluminum Bayonet / strongal D25 mm / 1 m
2 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	JETImodel SINGLE BEC
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
2 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	BEC 3A FOXY
1 x	Circlick securite
1 x	CC 05
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
2 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	30 cm BEC cable (male)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Adapter lead MPX/EC3
1 x	CC 01
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
2 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	3 LiPo XH>EH adapter
2 x	30 cm BEC cable (female)
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x	Cabel charger transmitter GRAUPNER
2 x	Windsock Ozone L -1200 mm
1 x	Parachute P4
2 x	Parachute PV6 for F3J
1 x	Wing OXY 5,0 m2
2 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
2 x	BALSA trip 2.0x10.0x1000 mm
1 x	Screwdriver for Hexagon 1,27mm
1 x	Joint with bearing M2 22x5,5
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
2 x	Spray Graphit 33
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	PSC 6
1 x	Electronic switch JETI SP06 Opto
1 x	Switc electronic 30 Amp
1 x	MAX BEC 2
1 x	Extension 5 lipos JST/C
2 x	SBEC 40
1 x	DPSI magnetic switch actuator (housing)
1 x	4 LiPo XH>EH adapter
1 x	Para-RC Mix
2 x	Para-RC Trike "RC-Bullix"
1 x	Aramid 50 daN 50 m
2 x	Ballast 700gr OPALE
2 x	Trike XL motor set (motor+esc+prop)
1 x	Paramotor BackPack XXS (without accessories)
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	2 LiPo XH>EH adapter
1 x	Dean "T" - Futaba Adapter
2 x	Ferrita 14x8x5.5 mm
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x
1 x	Indoor landing gear set
1 x	Legs + electric brakes for Viper Jet 90
1 x	120 mm leg for retract undercarriage with rotation sistem (1 pcs
1 x	DUPLEX 2.4EX Central Box 210
1 x	DUPLEX 2.4EX MU 3 Sensor
1 x	DUPLEX 2.4EX Central Box 320
2 x	BALSA trip 8.0x8.0x1000 mm
2 x	Balsa panel 3.0x100x1000 mm
1 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Balsa panel 2.5x100x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS
1 x	A40-10S V2 8-Pole + 6,7:1 PG
1 x	1000 ml sealer (DOPE)
1 x	Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm
1 x	Axle for motor A50-L
1 x	Ball Bearings for motor A60-V2
1 x	Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
2 x	A50 Motor Mount Alu complete set
3 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Axi for motor A40-L Motor 8-Pole-Electric Turbine
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	Axle for motor A30-XL V2
1 x	Paramotor BackPack XXS 2
1 x	Windsock Ozone L - 700 mm
1 x	Rescue 1,8m2 / BackPack
1 x	Parachute BACKUP X100
1 x	Angle support XT60 conector
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x	DUPLEX 2.4EX Expander E2
1 x	DUPLEX 2.4EX MUI 150 Sensor
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Support Pitot JETI
1 x	Soporte filtro FESTO (4 pcs)
1 x	160 mm carbon undercarriage (2pcs)
1 x	SU 29S 140 carbon landing gear
1 x	Bearing block for noseleg landing gear
1 x	White aluminium 230 mm landing gear
1 x	Fiberglass landing gear for 140-160
1 x	Shaft sleeve LAMA
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	Hitec 25 mm servo arm with ball link
1 x	Futaba 24/30 mm servo pull-pull double arm with ball link
1 x	Ball link M2 (10 pcs)
1 x	Futaba 14/20 mm servo pull-pull double arm with ball link
1 x	Screwdriver for Hexagon 1,5mm
1 x	TopFuel LiPo 35C-POWER-X 2400mAh 2S
1 x	Beech dowels 2.0 x 1000 mm
1 x	Balsa panel 8.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x6.0 mm

6,321.86EUR