Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

P-47 Thunderbird Deco 01
3,990.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Acorazado Tirpiz 1:200
1 x	Accesorios SCHARNHORST
1 x	La Capitania di Venetia 1:50
1 x	Acorazado SCHARNHORST 1:200
1 x	Portaequipajes BIG-MALIBU XL 285x90x44 cm Gris
3 x	Gorra Hispano Aviación
1 x	Arandela de bloqueo 4 mm (10 pcs)
1 x	Varilla ABS 1,5x1000 mm
1 x	Arandela 2.2 mm (20 pcs)
1 x	Helice XOAR 22x10 Electrica
1 x	Soporte conector MPX (6 pcs)
1 x	Destornillador allen 2,0x50 mm molibdeno
2 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Varilla acero Ø 2,0 mm x 1000 mm
1 x	Prolongador Futaba 100 cm Ø 0,35 mm
2 x	Acoplador para cable M4 (10 pcs)
1 x	Rótula M3 con tornillo y tuerca(6 uds)
1 x	Varilla ABS 2,0x1000 mm
1 x	Tubo acero (L 1000 mm, Ø9 mm, Ø8,7 mm)
1 x	Soporte grifo FESTO vertical (1 pcs)
2 x	Rótula larga M3 con bola/base, tornillo y tuerca (6 uds)
1 x	Tubo ABS 6,0x4,0x1000 mm
1 x	Ball link aluminio M3 V1 rojo (10 pcs)
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Helice APC 11x10 Electric
1 x	Hélice Electric Carbon 6x5
1 x	Rótula MAXI con bola/tornillo M3 (2 uds)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Helice APC 10x4.7 SF Pusher
1 x	Hélice POWER-PROP 7x7
1 x	Liston ABS H 2,0x2,0x330 mm
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Rótula con rodamiento M2 22x5,5
1 x	Rótula M3 RPA's-UAV's
1 x	Tubo ABS 3,0x2,0x330 mm
1 x	Arandela conica ancha alumino M3 oro (4 pcs)
1 x	Soporte FUEL DOT V3
1 x	Helice APC 12x8 Electric
1 x	Bomba de vacio 12 CFM completa
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Arandela de bloqueo 1.5 mm (10 pcs)
1 x	Acople ALU M2,5 Ø 4 (2 uds)
1 x	Rótula MAXI con bola/saliente M3 (2 uds)
1 x	Varilla acero Ø 3,0 mm x 1000 mm
2 x	Cable silicona "Y" 30 cm (Graupner)
2 x	Rótula larga M3 con bola/base, tornillo y tuerca (2 uds)
1 x	Varilla acero Ø 8,0 mm x 1000 mm
1 x	Tubo ABS 10,0x8,0x1000 mm
1 x	Prolongador silicona 100 cm (Futaba)
1 x	Hélice POWER-PROP 11x8
1 x	Tubo ABS 8,0x6,0x1000 mm
2 x	Banda lijado g. 180 "Carburo de Silicio" para BSL 220/E (5 pcs)
1 x	Arandela 1.7 mm (20 pcs)
1 x	Acoplador M2,5 Ø 2 mm (10 pcs)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Tubo acero (L 1000 mm, Ø6 mm, Ø5,7 mm)
2 x	Acoplador Micro M2 Ø 1 mm (10 pcs)
1 x	Rótula con bola M3 (10 pcs)
1 x	Soporte bomba/flitro Xicoy X45
1 x	Tubo aluminio (L 1000 mm, Ø3,0 mm, Ø2,1 mm)
1 x	Bayoneta aluminio ø30×1 mm x 1m
1 x	Helice APC 12x3.8 SF
1 x	Varilla latón Ø 1,5 mm x 1000 mm
2 x	Soporte ECU Xicoy X-45
1 x	Hélice POWER-PROP 13x8
1 x	Tubo acero (L 1000 mm, Ø10 mm, Ø9,7 mm)
1 x	Corta tubos aire
1 x	Varilla ABS 6,0x1000 mm
2 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Varilla latón hexagonal Ø 4 mm x 1000 mm
1 x	Camara 800 TVL CMOS para FPV
1 x	Soporte Filtro FESTO
1 x	Helice APC 11x4,5 Electric Pusher
1 x	Carro remolque para veleros 720 x 285 mm
1 x	Varilla latón Ø 0,8 mm x 1000 mm
1 x	Reguladro ACTROCON 60A
1 x	Regulador Actro-Marine 60A
1 x	Crimpadora
2 x	Prolongador silicona 10 cm (Futaba)
1 x	Prolongador Futaba hembra 40 cm de silicona
1 x	Extension silicona 30 cm macho (Futaba)
1 x	Varilla acero Ø 1,2 mm x 1500 mm
1 x	Hélice POWER-PROP 12x6
1 x	Soporte bomba Xicoy X45
1 x	Cámara Sony 4140+673 CCD Board con emisor 5,8 GHz 200mw + antena
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Varilla acero Ø 1,0 mm x 1000 mm
1 x	Helice XOAR 20x10 Electrica
1 x	Cable "Y" 15 cm
1 x	Hélice POWER-PROP 15x8
1 x	Varilla acero Ø 6,0 mm x 1000 mm
1 x	Soporte filtro FESTO (4 pcs)
1 x	Liston ABS I 20x10x1000 mm
1 x	Liston ABS 1,0x4,0x1000 mm
1 x	Hélice PT 16x10 E
2 x	Destornillador Torx® TX6
1 x	Helice APC 11x7 Electric
1 x	Varilla ABS 2,5x1000 mm
2 x	Varilla ABS 3,0x1000 mm
1 x	Ball link M2 (10 pcs)
1 x	Arandela dentada 2.7 mm (20 pcs)
2 x	Hélice Electric Carbon 10x6
1 x	Tubo ABS 5,0x4,0x1000 mm
1 x	Rótula M3
1 x	Rótula V3 aluminio M2,5 / 5 Diam con base corta (2 pcs)
1 x	Arandela abierta 3.1 mm (20 pcs)
1 x	Arandela de bloqueo 3 mm (10 pcs)
1 x	Arandela conica alumino M3 verde (8 pcs)
1 x	Liston ABS 1,5x3,0x1000 mm
1 x	Tubo ABS 18,0x16,0x1000 mm
1 x	Prolongador servo 20 cm HITEC/JR
2 x	Tubo ABS 6,0x5,0x1000 mm
1 x	Destornillador Allen 1.27 mm
1 x	Circlick para eje 1.5 mm (10 pcs)
2 x	Liston ABS 2.0x5.0x1000 mm
1 x	Tubo acero (L 1000 mm, Ø12 mm, Ø11,7 mm)
1 x	Liston ABS I 10x5x1000 mm
1 x	Acople ALU M2,5 Ø 3 (2 uds)
1 x	Arandela conica alumino M4 rojo (8 pcs)
2 x	Cable S.BUS 3 salidas 100 mm
1 x	Tubo ABS 4,0x3,0x1000 mm
1 x	Prolongador S-Bus JR/JR 10cm
2 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	EXTRA 330 LX 2.34m ARF (LX-09) Pilot
1 x	EDGE 540-A 105" (2660 mm)
1 x	EDGE 540-A 91" (2310 mm)
1 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 50m
1 x	Cianocrilato MD GLUE+ 405 20g (viscosidad media)
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x	Epoxy Resin L + Hardener LT kit/ 895g
1 x	Resina P+acelerador (EPH161-P)kit 585g [500g res+85g ace]
1 x	Hélice Electric Carbon 8.5x5
1 x	Acoplador "Z" Ø 1 (2 uds)
1 x	Tuerca autoblocante M2,5 aluminio (4 pcs)
1 x	Tubo carbono (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Prolongador 7.5 cm
1 x	Tuerca autoblocante M2.5 (10 pcs)
1 x	Tornillo M2x8 (10 pcs)
1 x	Polea de bronce 16/2 (2 pcs)
1 x	Prolongador Futaba macho 40 cm de silicona
1 x	Pin Ø 2 mm para Kwik link MPJ2162/2163 (6 pcs)
1 x	Tuerca autoblocante M6 (10 pcs)
1 x	Epoxy 5min KAVAN 2x 100g
1 x	Display OLED for PowerBox Mercury SRS
1 x	Cable silicona 0,25 mm² rojo (25 m)
1 x	PowerBox MagSensor conector rojo
1 x	Tren retráctil tripata (Alfa model)
1 x	Tren retráctil veleros hasta 3,5 Kg
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Adaptador 3,2 mm M6 para cono 40 mm hélice fija.
1 x	Soporte lija 25 mm
1 x	Abrazadera 4.6x203 (20 uds)
1 x	Acoplador M2,5 Ø 3 mm (10 pcs)
1 x	Eje barco 290 mm M5
1 x	Hélice RABOESCH M4 40 mm (3 Palas) (Hélice izquierda)
1 x	Hélice RABOESCH M3 50 mm (3 Palas pr) (Hélice derecha)
1 x	Canal de ABS de 5,0x10,0x1000 mm
1 x	Conector ABS "CRUZ" 4.0 mm x 1000 mm
1 x	Helice PT 21x13 EL
1 x	Acoplador laton Ø 5 mm L: 25 mm
1 x	Helice PT 20x13 EL
1 x	Eje barco Ø6mm de 450mm M5
1 x	Hélice RABOESCH M4 55 mm (5 Palas) (Hélice Derecha)
1 x	Hélice Electric Carbon 10.5x8
1 x	Epoxy 40 min (Resina). 5 Kg
1 x	Cianocrilato MD GA460 odourless 20g
1 x	Ball link ALU M2,5/2 con rodamiento (1 pcs)
1 x	Bayoneta: Fibra de vidrio/Carbono (13.7/12.5) x 1000 mm
1 x	Agente espumante para resinas epoxycas 200g
1 x	Pines alineamiento Ø 8 mm-2 pats (100 pares)
1 x	Equilibrador hélices
1 x	Tuerca autoblocante M4 (10 pcs)
1 x	Polea de bronce 2,5/1 (2 pcs)
1 x	Medidor angulos tamaño pequeño
1 x	Soporte para aviones
1 x	Pin 2,5 terminales riostras M2,5 ⌀ (6 pcs)
1 x	Tubo carbono (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Kwik link con brazo M5xM2,5xL30
1 x	Pin Ø 2,5 mm para Kwik link MPJ2170/2173 (6 pcs)
1 x	Tornillo M2x8 PH
1 x	Tubo carbono conico 3K 10x5x0.3 x 880mm
1 x	Rótula V2 corta M2,5 5Diam negra (2 pcs)
1 x	Kwik link metálico M2,5 (10 uds)
1 x	Prolongador PVC 150 cm (Graupner)
1 x	Arandela de bloqueo 2 mm (10 pcs)
1 x	Kwik link con brazo M3xM2xL24
1 x	Tornillo nylon M5x30
1 x	Arandela de goma M3-M4 (8 pcs)
1 x	Rótula V3 aluminio M2,5 5Diam (2 pcs)
1 x	Pîn 3,0 terminales riostras M3,0 ⌀ (6 pcs)
1 x	Rótula MAXI sin bola M3 (2 uds)
1 x	Arandela 4.3 mm (20 pcs)
1 x	Rótula larga M2 con bola/tornillo (6 uds)
1 x	Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm
1 x	Prolongador 30 cm (Futaba)
1 x	Rótula V1 larga M2/M1,6 3Diam negra (6 pcs)
1 x	Tubo ABS 5,0x3,0x1000 mm
1 x	Círculo autoadhesivo para arandelas M4 (36 pcs)
1 x	Autogiro Cierva C30 Spain
1 x	Hélice RABOESCH M4 30 mm (3 Palas) (Hélice izquierda)
1 x	Cable servos silicona 0,14 mm2 Graupner (5 m)
1 x	PowerBox Competition SR2
1 x	Bateria LRP 2200-7.2v 6 cell NiMH
1 x	PowerBox Champion SRS
1 x	Cable BEC 30 cm (macho)
1 x	POWERBOX Magic Jeti Switch
1 x	Cable servos PVC 0,08 mm2 Graupner (5 m)
1 x	Tijeras curvas 16cm - GFK/CFK/Aramid
1 x	Varilla latón Ø 1,0 mm x 1000 mm
1 x	Adaptador 5,0 mm M6 para cono 40 mm hélice fija.
1 x	Soldador pequeño 100 w/230 v
1 x	Banda lijado g. 80 para BSL 220/E (5 pcs)
1 x	Liston ABS 1,5x6,0x1000 mm
1 x	Arrancador Sullivan-STAR 603 DINATRON
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Destornillador allen "Hex" Ø 2.0 molibdeno
1 x	Bascular < 40 Kg
1 x	Varilla acero Ø 5,5 mm x 1000 mm
1 x	Acople ALU M2,5 Ø 6 (2 uds)
1 x	Arandela de bloqueo 2.5 mm (10 pcs)
1 x	Extension silicona 30 cm hembra (Futaba)
1 x	ULTIMATUM 2.0 m green/black
1 x	Fuselage BULL MØ1 2.600mm
1 x	Capuchón L interruptor aluminio azul
1 x	Prolong/Adap correa Futaba 12-14C
1 x	Prolong/Adap correa Futaba V
1 x	Bancada receptor (Azul)
1 x	BULL MØ1 2.600mm RED
1 x	Prolong/Adap correa HITEC Aurora 9, JR y Spectrum (azul)
1 x	Cristal TX 35.150 Ch 75
1 x	Prolongador Cable S-Bus
1 x	Cabina BULL MØ1 2.600mm
1 x	Chaqueta Hispano Aviación
1 x	ULTIMATUM 2.0 m yellow/blue
1 x	BULL MØ1 2.600mm "RED BULL"
1 x	ULTIMATUM 2.0 m white
1 x	Set transmisiones ULTIMATUM 2.0 (duraluminio)
1 x	BULL MØ1 2.600mm "ALPINE"
1 x	ULTIMATUM 2.0 PRO "Full Carbon Red"
1 x	ULTIMATUM 2.0 m Red Bull

42,846.81EUR