119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x DYNAMOMETER S-1580
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Circlick securite
1 x Bec MR UBEC 5A (5v/6v/7v)
2 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Adapter lead MPX/XT60
1 x CC 05
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Cabel charger transmitter GRAUPNER
1 x CC 02
1 x 30 cm BEC cable (female)
1 x 30 cm BEC cable (male)
2 x APM2.6 Power module with 5.3V DC BEC
1 x Connector Sub-D 2+5 Female
3 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Double conector with JR adapter and 200 mm extension
1 x CM-3
2 x Connector Sub-D 2+5 Male
1 x Vasa model Catapult
1 x EVP Unit for AXI2208/xx and 2212/xx
1 x Bungee HLG Premium
1 x Ferrita 17x10x6.5 mm
2 x Ferrita 27x14x7 mm
1 x ABS tube 3.0x2.0x330 mm
1 x Profile ABS half cane 4x2.5x1000 mm
1 x ABS angle 1.5x1.5x1000 mm
1 x 30 cm MULTIPLEX female connector
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Socket head ball link M3 (2 uds)
1 x Monokote ROJO misil (1.8x0.65m)
1 x Rescue 1,8m2 / BackPack
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x Green smoke canister 100 g
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Tapa estado carga XT-60 (6 pcs)
1 x Battery Protection Circuit Board 22.2v 6s
1 x wing/fuselage connector for 6 pines AWG 20-24 (without pines)
2 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x MPX-Dean "T" Adapter
1 x Propeller RF CFK 13x6.5
1 x Propeller CFK 14.5x10 Slim
2 x MAX BEC 2D plus EX
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x BEC 3A FOXY
1 x Extension 2/3 lipos JST/C
2 x PSC 5
2 x TP/TopFuel - XH 2/3S Adapter
1 x TrainerCord (master-learner)
1 x Propeller CFK 16x16 Wide
1 x Propeller CFK 11x8
3 x 2 LiPo XH>EH adapter
1 x 5 LiPo XH>EH adapter
1 x SBEC 40
1 x Propeller CFK 14x6.5
1 x Interruptor SAFET-SWITCH 12HV Twinbatt
1 x Connector CAN 15
1 x Long Switch On/Off micro
1 x Interruptor RX/Batterie
1 x Propeller CFK 14x8 Slim
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Propeller CFK 15.5x10
1 x Opto Gas Engine Kill Switch
1 x Propeller CFK 23x12
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x DPSI Ampere battery backer
1 x Propeller CFK 14x8
1 x Propeller CFK 12.5x6.5
1 x 3 LiPo XH>EH adapter
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x SBEC 30 D
1 x Propeller CFK 12.75x13
1 x ANGEL 48" pp orange/black/white
1 x PowerPack 2.5X2 PRO
1 x Battery EMCOTEC LiIon 3000 7.2v
1 x Ferrita 14x8x5.5 mm
1 x SyRen 10A 6V-24V Regenerative Motor Driver
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Conector JR Servo male (50 pcs)
1 x Charger 220/110v
1 x Propeller CFK 12.5x7
1 x Propeller CFK 16x13
1 x Propeller electric carbon 7x7
1 x 28 mm tailwheel unit
1 x KOBY 40 LV Esc
1 x 21x14 Falcon electric carbon prop (64 g)
1 x Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x Battery RX JETI LiIon RB 3100 7.2v
1 x Extension 5 lipos JST/C - JST
1 x Female connector JST SH 1.0mm with 10 cm wire
1 x Multi-adapter balancer JST/C - TP
1 x LightBox SR
1 x 12V Car Adapter
1 x Switching module high voltage SXH
1 x Extension 5 lipos JST - JST/C
1 x DPSI magnetic switch actuator (housing)
2 x Extension 6 lipos XH > EH
1 x Extension for SensorSwitch 60cm
1 x Hacker X-Pro USB interface V2
1 x wing/fuselage connector for 12 pines AWG 20-24
1 x Three-position switched channel, short
1 x SWTU2 switch
1 x Servo slow down unit (0,7-14,7 sec )
1 x Prolonguer for Balancer Thunder Power 6S
1 x Switc electronic 30 Amp
1 x wing/fuselage connector for 16 pines AWG 20-24
3,884.01EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies