1 x | Extractor piñones 2.3/3.2 mm |
2 x | BALSA triangular 10x10x1000 mm |
2 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 10x10x1000 mm |
2 x | BALSA leading edge 8x10x1000 mm |
3 x | Mahogany wood slat 2.0x2.0x1000 mm |
2 x | Pine wood slat 3.0x5.0x1000 mm |
2 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
2 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
2 x | Pine wood slat 6.0x6.0x1000 mm |
2 x | BALSA trip 5.0x5.0x1000 mm |
2 x | Linden wood slat 3.0x3.0x1000 mm |
2 x | Pine wood slat 2.0x10.0x1000 mm |
2 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | BALSA trip 3.0x3.0x1000 mm |
4 x | Pine wood slat 3.0x7.0x1000 mm |
2 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
2 x | Liston HAYA 10 x 10 x 1000 mm |
2 x | Beech dowels 3.0 x 1000 mm |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
2 x | Ferrita 14x8x5.5 mm |
2 x | Ferrita con funda |
2 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Profile ABS Square 1 x 1000 mm |
2 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
2 x | U Profile ABS 8,0x4,0x1000 mm |
2 x | Straightened rod Ø 4.0 mm x 1000 mm |
2 x | Straightened threaded rod M3 - 1m |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | L-Connector 1.0 mm x 1000 mm |
2 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Profile ABS half cane 3x1000 mm |
2 x | Straightened threaded rod M2-1m |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Ventus 1:4 set of instruments |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
2 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
2 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
2 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Connectors DEANS (T) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Round Rod 6,0x1000 mm |
1 x | PowerBox MERCURY SR2 |
3 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | MicroMatch PowerBox |
1 x | PowerBox DigiSwitch V2 MPX/JR |
3 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
1 x | PowerBox iGyro 1e |
1 x | Support FUEL DOT V3 |
3 x | DPSI Micro-DualBat 5.9V / 7.2V MPX-JR |
1 x | Soporte grifo FESTO (2 pcs) |
2 x | DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
1 x | LOGO 600 SX (kit) |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
2 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
2 x | VPP system propeller for AXI VPP motors (spare) |
1 x | Kit hydraulic brake |
1 x | T-Hose connector 4-4-4mm |
1 x | Y-Hose connector 2-2-2 mm |
1 x | Check valve quick hose connector 4-4 mm |
2 x | Ferrita 27x14x7 mm |
1 x | Tap FESTO 4-4 mm |
1 x | Axle wheel with accesories |
1 x | Quick hose connector 4-4 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | Profile ABS half cane 4x1000 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Profile ABS half cane 5.0x1000 mm |
2 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Rubber profile 8-2 mm 2M |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
2 x | DPSI Micro SingleBat 5.9V/7.2V magnetic switch |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | A/C economy plywood 600x300x6+.0 mm |
2 x | DPSI LR-S (with push buttons) |
1 x | DPSI RV Mini 6 (2008) |
1 x | Filter Capacitor JR |
4 x | DPS Switch JR/JR |
2 x | Magnetic Connect locking system |
3 x | DPSI Micro - RCS |
2 x | OPTOTRONIX Aurora LCU |
1 x | Balsa panel 3.0x100x1000 mm |
2 x | Wing connector 8pin with pin strip, plug & socket |
1 x | EWC3 100 cm wing connector |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Optotronix X-Carrier |
3 x | DPSI Micro MPS |
1 x | DPSI RV Mini 6 Magic with Gas-Cap switch |
2 x | DPSI 2001 RV |
2 x | DPSI OCP Overload protection |
2 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
1 x | DPSI magnetic switch actuator (PCB) |
1 x | Switch magnet for gas cap and magnet switch actuators |
3 x | DPSI RV Mini 5 Magic |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
1 x | BOEING 727, Electric brake 28mm + controller |
1 x | Brake controller for 28 and 36 mm Brakes |
1 x | ESC KAVAN R-80SB SBEC 80A |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
1 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
1 x | Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts) |
1 x | Pipa 3D BULL MØ1 2.600mm |
1 x | Propeller APC 11x4.5 Electric Pusher |
1 x | Propeller APC 10x3,8 SF Electric Pusher |
1 x | Horn 6/35 with M3 Bearing |
1 x | Extra long horn 60x30 |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | 20 mm carbon horn |
1 x | Cable with accesories |
1 x | Horn 6/20 with M3 Bearing |
1 x | Horn mando long (2 pcs) |
1 x | Control horn long w/ball |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Motor A50-16 S V4 |
1 x | Axle for motor A20-S (3 uds) |
1 x | Motor A20-20 L EVO |
1 x | Shaft for A60-20/22/24S (120 mm) |
1 x | Shaft for A60-L V4 |
1 x | Program Card KAVAN ES |
1 x | ESC KAVAN PRO-160HV Opto 160 Amp |
1 x | Propeller APC 10x7 Electric |
1 x | Propeller APC 10x5 Electric |
1 x | Propeller APC 14x10 Electric |
1 x | Telemetry interface ALTIS 20 cm |
1 x | Propeller APC 10x4.7 |
1 x | DYMOND VTX UBS Programming adapter |
1 x | Device Terminal |
1 x | Propeller 12x6 Falcon electric |
1 x | 21x14 Falcon electric carbon prop (64 g) |
1 x | Propeller APC 11x4.7 SF Pusher |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | 5 mm M2 variable horn |
1 x | Horn with ball 40x30 |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Horn 5/15 with M2 Bearing |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Altimeter Altis V4 |
1 x | Motor A200-8 |
1 x | Motor A60-7XS V4 28-pole kv330 |
1 x | Motor A20-26 M EVO |
1 x | Brake for 140 mm wheels |
1 x | Motor A10-7 L 4,4:1 |
1 x | Motor A30-10 XL V4 |
1 x | Motor A50-12 L Glider |
1 x | Motor B20-18 L + 4:1 gearbox |
1 x | Motor A40-10 L V2 14-Pole Glider |
1 x | Battery EMCOTEC LiIon 3000 7.2v |
1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm "Z" |
1 x | Spinner propeller pleg. 36 mm / 6,0 mm |
1 x | Turbo light spinner cap white 32mm |
1 x | Spinner propeller pleg. 32 mm / 6,0 mm |
1 x | White spinner propeller pleg. 36 mm / 4 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Spinner propeller pleg. 30 mm / 3,0 mm |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Bearing 698-2Z for AXI 5330/xx |
1 x | DPSI RV Mini 6 Magic |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | MPX Sub-D Adaptor |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | Heat sink for Optotronix LEDs |
1 x | PowerFuel RX V2 Fuel Pump |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | LiIon Battery 3000 mAh 3.3v 15A (2 pcs) |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply) |
1 x | EWC6 40 cm wing connector |
1 x | Spinner propeller pleg. 38 mm / 6,0 mm |
1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
1 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
1 x | Z Spinner (CN) 32mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Spinner fold propeller 50 mm (white spare spinner) |
1 x | Epoxy Resin L + Hardener GL 1 (30 min) |
1 x | Spinner Alumin. propeller pleg. 40 mm / 4,0 mm |
1 x | Epoxy 40 min. 4kg (Hardener) |
1 x | DPSI RV Mini 5 (2008) |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | DPSI Ampere battery backer |
1 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | Cover cap drop-shaped paintable 43 mm |
1 x | Optotronix Aurora Plug |
1 x | DPSI Ampere & Voltage bundle |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Servo-V-Limiter 5.2V |
1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/7º |
1 x | Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/5º |
1 x | Spinner propeller pleg. 38 mm / 5,0 mm |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/0º |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Prop rubber XS set 4 pieces |
1 x | Spinner propeller pleg. 30 mm/6,0 mm/0º |
1 x | Spinner propeller pleg. 40 mm / 6,0 mm |
1 x | Spinner propeller pleg. 32 mm / 5,0 mm |
1 x | Spinner propeller pleg. 28 mm/5,0 mm |
1 x | Spinner propeller pleg. 48 mm / 6,0 mm |
1 x | Spinner propeller pleg. 30 mm / 6,0 mm |
1 x | Spinner propeller pleg. 33 mm / 5,0 mm |
1 x | Spinner propeller pleg. 38 mm / 4 mm |
1 x | Z Spinner (CN) 38mm |
1 x | Spare white 38-45 mm spinner |
1 x | Z Spinner (CN) 35mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Z Spinner (CN) 30mm |
1 x | Spinner propeller pleg. 30 mm / 2,3 mm |
1 x | White spinner propeller pleg. 42 mm / 4 mm |
1 x | Spinner propeller pleg. 38 mm / 5 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Z Spinner (CN) 40mm |
1 x | Spinner propeller pleg. 45 mm / 4 mm |
1 x | Spinner propeller pleg. 45 mm / 6 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
1 x | CN-Spinner propeller pleg. 36 mm / 6 mm |
1 x | Spinner propeller pleg. 30 mm / 6,0 mm |
1 x | Spinner propeller pleg. 38 mm / 3,17 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Spare white 30-36 mm spinner |
1 x | Spinner propeller pleg. 40 mm / 6 mm |
1 x | Z Spinner (CN) 42mm |
1 x | Spinner propeller pleg. 30 mm / 5,0 mm |
1 x | Spinner fold propeller 36 mm (white spare spinner) |
1 x | Spare white 38-45 mm spinner |
1 x | Spinner fold propeller 38 mm (white spare spinner) |
1 x | Spinner propeller pleg. 40 mm / 5 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Spinner propeller pleg. 30 mm / 2,3 mm |
1 x | Spinner propeller pleg. 30mm axle 3,0 mm |
1 x | Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har |
1 x | Epoxy Resin L + Hardener LT kit/ 3125g |
1 x | Foaming agent for epoxy resins 200 g |
1 x | Epoxy Resin L + Hardener LT kit/ 895g |
1 x | Epoxy 5 min. 500 g (Hardener) |
1 x | Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey) |
1 x | Epoxy Resin L + Hardener GL2, kit/ 930 g |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | Epoxy 40 min (Resin). 5 Kg |
1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Epoxy 40 min (Hardener). 10Kg |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch |
|
15,244.27EUR |