Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

VSpeak Modulo Glasses JETI
151.25EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Extractor piñones 2.3/3.2 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
3 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	BALSA triangular 6x6x1000 mm
2 x	Pine wood slat 6.0x6.0x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
2 x	Linden wood slat 3.0x3.0x1000 mm
2 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
2 x	BALSA trip 3.0x3.0x1000 mm
4 x	Pine wood slat 3.0x7.0x1000 mm
2 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
2 x	Beech dowels 3.0 x 1000 mm
1 x	ABS tube 5.0x4.0x1000 mm
1 x	ABS tube 2.0x1.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	ABS tube 5.0x4.0x156 mm
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	ABS tube 9.0x8.0x1000 mm
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	ABS tube 3.0x2.0x330 mm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	ABS tube 3.0x2.0x1000 mm
1 x	ABS tube 5.0x3.0x1000 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
2 x	Ferrita 14x8x5.5 mm
2 x	Ferrita con funda
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Profile ABS Square 1 x 1000 mm
2 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x	Straightened rod Ø 1.5 mm x 1500 mm
2 x	U Profile ABS 8,0x4,0x1000 mm
2 x	Straightened rod Ø 4.0 mm x 1000 mm
2 x	Straightened threaded rod M3 - 1m
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	L-Connector 1.0 mm x 1000 mm
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Profile ABS half cane 3x1000 mm
2 x	Straightened threaded rod M2-1m
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Ventus 1:4 set of instruments
1 x	ABS angle 6,0x6,0x1000 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 14.0 mm x 1000 mm
2 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
2 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
2 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Connectors DEANS (T)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Extension silicon 10 cm (Futaba)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Round Rod 6,0x1000 mm
1 x	PowerBox MERCURY SR2
2 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	MicroMatch PowerBox
1 x	PowerBox DigiSwitch V2 MPX/JR
3 x	Pine wood slat 1.5x3.0x1000 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x	PowerBox iGyro 1e
1 x	Support FUEL DOT V3
3 x	DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x	Soporte grifo FESTO (2 pcs)
2 x	DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	ABS tube 7.0x5.0x1000 mm
1 x	ABS tube 14.0x10.0x1000 mm
1 x	ABS tube 12.0x10.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
1 x	CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm)
1 x	LOGO 600 SX (kit)
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm)
2 x	Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
2 x	VPP system propeller for AXI VPP motors (spare)
1 x	Kit hydraulic brake
1 x	T-Hose connector 4-4-4mm
1 x	Y-Hose connector 2-2-2 mm
1 x	Check valve quick hose connector 4-4 mm
2 x	Ferrita 27x14x7 mm
1 x	Tap FESTO 4-4 mm
1 x	Axle wheel with accesories
1 x	Quick hose connector 4-4 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Profile ABS half cane 4x1000 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Profile ABS half cane 5.0x1000 mm
2 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Profile ABS triangular 4.0x1000 mm 60º
1 x	Rubber profile 8-2 mm 2M
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Balsa panel 5.0x100x1000 mm
2 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x	A/C economy plywood 600x300x6+.0 mm
2 x	DPSI LR-S (with push buttons)
1 x	DPSI RV Mini 6 (2008)
1 x	Filter Capacitor JR
3 x	DPS Switch JR/JR
2 x	Magnetic Connect locking system
3 x	DPSI Micro - RCS
2 x	OPTOTRONIX Aurora LCU
1 x	Balsa panel 3.0x100x1000 mm
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	EWC3 100 cm wing connector
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	Optotronix X-Carrier
2 x	DPSI Micro MPS
1 x	DPSI RV Mini 6 Magic with Gas-Cap switch
2 x	DPSI 2001 RV
2 x	DPSI OCP Overload protection
2 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	DPSI magnetic switch actuator (PCB)
1 x	Switch magnet for gas cap and magnet switch actuators
3 x	DPSI RV Mini 5 Magic
1 x	Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
1 x	Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x	BOEING 727, Electric brake 28mm + controller
1 x	Brake controller for 28 and 36 mm Brakes
1 x	ESC KAVAN R-80SB SBEC 80A
1 x	Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm)
1 x	CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x	Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts)
1 x	Pipa 3D BULL MØ1 2.600mm
1 x	Propeller APC 11x4.5 Electric Pusher
1 x	Propeller APC 10x3,8 SF Electric Pusher
1 x	Horn 6/35 with M3 Bearing
1 x	Extra long horn 60x30
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	20 mm carbon horn
1 x	Cable with accesories
1 x	Horn 6/20 with M3 Bearing
1 x	Horn mando long (2 pcs)
1 x	Control horn long w/ball
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	6 mm blue aluminium threaded horn with patella
1 x	Motor A50-16 S V4
1 x	Axle for motor A20-S (3 uds)
1 x	Motor A20-20 L EVO
1 x	Shaft for A60-20/22/24S (120 mm)
1 x	Shaft for A60-L V4
1 x	Program Card KAVAN ES
1 x	ESC KAVAN PRO-160HV Opto 160 Amp
1 x	Propeller APC 10x7 Electric
1 x	Propeller APC 10x5 Electric
1 x	Propeller APC 14x10 Electric
1 x	Telemetry interface ALTIS 20 cm
1 x	Propeller APC 10x4.7
1 x	DYMOND VTX UBS Programming adapter
1 x	Device Terminal
1 x	Propeller 12x6 Falcon electric
1 x	21x14 Falcon electric carbon prop (64 g)
1 x	Propeller APC 11x4.7 SF Pusher
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	5 mm M2 variable horn
1 x	Horn with ball 40x30
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Horn F3A de Titanium 16 mm (2 units)
1 x	Horn 5/15 with M2 Bearing
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Altimeter Altis V4
1 x	Motor A200-8
1 x	Motor A60-7XS V4 28-pole kv330
1 x	Motor A20-26 M EVO
1 x	Brake for 140 mm wheels
1 x	Motor A10-7 L 4,4:1
1 x	Motor A30-10 XL V4
1 x	Motor A50-12 L Glider
1 x	Motor B20-18 L + 4:1 gearbox
1 x	Motor A40-10 L V2 14-Pole Glider
1 x	Battery EMCOTEC LiIon 3000 7.2v
1 x	Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm
1 x	Spinner propeller pleg. 45 mm / 6,0 mm "Z"
1 x	Spinner propeller pleg. 36 mm / 6,0 mm
1 x	Turbo light spinner cap white 32mm
1 x	Spinner propeller pleg. 32 mm / 6,0 mm
1 x	White spinner propeller pleg. 36 mm / 4 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Spinner propeller pleg. 30 mm / 3,0 mm
1 x	Spinner propeller pleg. 40 mm / 5,0 mm
1 x	Spinner propeller pleg. 40 mm / 3,2 mm
1 x	Bearing 698-2Z for AXI 5330/xx
1 x	DPSI RV Mini 6 Magic
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	MPX Sub-D Adaptor
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Heat sink for Optotronix LEDs
1 x	PowerFuel RX V2 Fuel Pump
1 x	wing/fuselage connector for 16 pines AWG 20-24
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x	EWC6 40 cm wing connector
1 x	Spinner propeller pleg. 38 mm / 6,0 mm
1 x	Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm
1 x	Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm
1 x	Z Spinner (CN) 32mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Spinner fold propeller 50 mm (white spare spinner)
1 x	Epoxy Resin L + Hardener GL 1 (30 min)
1 x	Spinner Alumin. propeller pleg. 40 mm / 4,0 mm
1 x	Epoxy 40 min. 4kg (Hardener)
1 x	DPSI RV Mini 5 (2008)
1 x	PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	DPSI Ampere battery backer
1 x	Heat-conducting adhesive (2x2ml), WLK DK 4
1 x	wing/fuselage connector for 3 pines AWG 20-24
1 x	Cover cap drop-shaped paintable 43 mm

12,975.41EUR