4.50EUR

CA Glue fast 20g
[R1501032]


CA Glue fast 20g
Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Extension MPX-MPX 20 cm
Extension MPX-MPX 20 cm

temporarily out of stock
temporarily out of stock

TYGON tubo 1 m Diam. 3.4 x 2.0  mm
TYGON tubo 1 m Diam. 3.4 x 2.0 mm

temporarily out of stock
temporarily out of stock

Tygon tube 6.35 - 3.18 mm 1m
Tygon tube 6.35 - 3.18 mm 1m

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 23x8
Propeller MENZ-S 23x8

temporarily out of stock
temporarily out of stock

Sparkplug NGK CM6
Sparkplug NGK CM6

temporarily out of stock
temporarily out of stock

XT-60  connector (female)
XT-60 connector (female)

temporarily out of stock
temporarily out of stock

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x LUCAS pilot ARTF
2 x Trike XL motor set (motor+esc+prop)
2 x Wing OXY 5,0 m2
1 x Paramotor BackPack XXS 2
3 x Paramotor BackPack XXS (without accessories)
2 x Opale Rucksack
2 x Aramid 50 daN 50 m
1 x Cap Hispano Aviación
1 x Paramotor Kit Camo H1.5/ Ben Red
2 x Ballast 700gr OPALE
1 x Paramotor Trike XL
1 x Softshell Hispano Aviación
1 x Clip fixing for wing (2 pcs)
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x Short ball link M2 (6 uds)
1 x Joint with bearing M3 22x5,5
1 x M3 Maxi ball link (2 uds)
1 x 1,6x1000 mm 2:1 red termoretract tube
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 25 mm fenders (10 pcs)
1 x Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
2 x BALSA triangular 10x10x1000 mm
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x 12 mm floating pad (49 pcs)
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x Oracover Azul Cielo 2 m
1 x 3 mm Leader (L 100 mm)
3 x 2 mm female connector (2 pcs) with safety connector
1 x 1/12 Pilot "Langley"
1 x ORACOVER Ferrari red (2 m)
1 x 6,4x1000 mm 2:1 red termoretract tube
1 x 2.3 mm Adapter for 30 mm spinners
1 x 37 mm PVC transparent battery termo-retract (1 m)
1 x PIX Hawk with accesories
1 x SE Ring 240 mm (2 pcs)
1 x Long pinned hinge (6 uds)
1 x 2,4x1000 mm 2:1 black termoretract tube
1 x Conector MR-60 (pareja)
1 x Conector BEC female (10 pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x Pilot "Anthony" (Slimline)
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x Oracover CARBON Metalic 1 m
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x Cinta Goldfix 1m
1 x Balsa panel 3.0x100x1000 mm
1 x 290 mm M4/4 mm Prop shaft
1 x 15 mm floating pad (30 pcs)
1 x 14 mm portholes (10 pcs)
1 x 20x200 mm battery rings
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x SE Ring 330 mm (4 pcs)
1 x Pilot "Adolf" Legends Series (Slimline)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Conector Servo female 4 pines
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x 4,8x1000 mm 2:1 blue termoretract tube
1 x Round Rod 6,0x1000 mm
1 x Spray YELLOW Inca Lexan 150ml
1 x Universal Colour Paste white 50 g
1 x Strip 2,5x1,25x330 mm
1 x Paint gun for sprays
1 x ABS tube 4.0x3.0x1000 mm
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x ABS tube 20.0x18.0x1000 mm
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x CC 03
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x ABS tube 12.0x10.0x1000 mm
1 x Bungee HLG Premium
2 x Glases Stratus
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x ABS tube 4.0x2.0x1000 mm
1 x 30 cm BEC cable (female)
1 x ABS tube 6.0x5.0x1000 mm
1 x Glases Flitemaster
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Cabel charger transmitter GRAUPNER
1 x CC 02
1 x 4 LiPo XH>EH adapter
2 x TP/TopFuel - JST-EH 4/5S Adapter
1 x ABS tube 6.0x4.0x1000 mm
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x Servo mounting frame SV-1260MG
1 x T-Motor U7-V2.0 Kv420
2 x Straightened rod Ø 1.5 mm x 1000 mm
2 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x Blind nut M6 (4 pcs)
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Hexagonal Nut M1 (10 pcs)
1 x Pine wood slat 2.0x10.0x1000 mm
2 x Brass rod Ø 0.5 mm x 1000 mm
2 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
2 x Straightened rod Ø 7.0 mm x 1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x Threaded insert M3 (4 pcs)
1 x Lock nut M6 (10 pcs)
1 x Blind nut M4 (4 pcs)
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Blind nut M6 (4 pcs)
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Hexagonal Nut M4 (20 pcs)
1 x Straightened threaded rod M3 - 1m
1 x Nut for mounting M6 (4 pcs)
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x BALSA triangular 6x6x1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x Blind nut M2 (10 pcs)
1 x BALSA trip 2.0x10.0x1000 mm
1 x Nut for mounting M3 (10 pcs)
1 x Nut for mounting M2,5 (4 pcs)
1 x Pine wood slat 10x10x1000 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Balsa panel 1.0x100x1000 mm
1 x Blind nut M8 (10 pcs)
1 x Blind nut M5 (10 pcs)
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Straightened threaded rod M2-1m
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Hexagonal Nut M4 (10 pcs)
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Lock nut M5 (20 pcs)
1 x Nut for mounting M4 (4 pcs)
1 x Threaded insert M5 (10 pcs)
1 x Nut for mounting M3 (4 pcs)
1 x Blind nut M3 (4 pcs)
1 x Hexagonal Nut M1,6 (10 pcs)
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Nut for mounting M5 (4 pcs)
1 x Blind nut M5 (4 pcs)
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Hexagonal Nut M3 (10 pcs)
1 x Beech dowels 3.0 x 1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Extension 5 lipos JST - JST/C
1 x wing/fuselage connector for 3 pines AWG 20-24
1 x USB HLS prog. interface
1 x Glases Ace
1 x JETImodel Addcap 1640
1 x Male/Female prolonguer for Balancer Thunder Power 6S
1 x Female connector JST SH 1.0mm with 10 cm wire
1 x Male connector for 12 pines AWG
1 x Hacker X-Pro USB interface V2
1 x Interruptor SPS 70v 60/120A
1 x Male connector for 6 pines AWG
1 x PWC4 wing/fuselage connector for 4 servos
1 x wing/fuselage connector for 16 pines AWG 20-24
1 x Pins M connect Multipin connectors AWG 20-24
1 x Switc electronic 30 Amp
1 x Prolonguer for Balancer Thunder Power 6S
1 x SPS 70V 140/280 A
1 x Selfstart electronic switch
1 x 6 mm aluminium horn with patella
1 x Servo GO-02 Digital 1.8g
1 x BALSA trip 2.0x2.0x1000 mm
1 x Horn with ball 55x40
1 x Micro Tarjeta SD Rapid Rush 16 GB
2 x 0,14 mm PVC servo wire extension, ZH micro conector.
2 x 3,0x60 mm allen screwdriver
1 x Birch plywood plate 600x300x1.5 mm
1 x Balsa panel 10x100x1000 mm
1 x Transmitter JETI Duplex DC-24 EX Carbon Line DARK Orange Multimo
1 x Transmitter JETI Duplex DS-24 EX Carbon Line Dark RED Multimode
1 x DUPLEX 2,4EX Brackets for Transmitter DC/DS
1 x Birch plywood plate 600x300x2.0 mm
1 x Holder for DC Transmitter/Tray DUPLEX 2,4EX
1 x Balsa panel 1.5x100x1000 mm
1 x Transmitter JETI Duplex DS-24 EX Carbon Line Multimode
1 x Switch Button DS Tx DUPLEX
12,660.19EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies