1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x CC 01
1 x Copper lacquer wire Ø0,2 mm (5 m)
2 x Cabel charger transmitter GRAUPNER
1 x 30 cm BEC cable (male)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
2 x Connector Sub-D 2+5 Male
1 x Dean "T" - Futaba Adapter
2 x CC 03
1 x Connector CAN 15
1 x 30 cm BEC cable (female)
2 x CC 05
1 x CC 02
2 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x UBEC 6A KAVAN
2 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
4 x Black copper lacquer wire Ø0,2 mm (5 m)
2 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x 2 LiPo XH>EH adapter
3 x 3 copper lacquer wire Ø0,2 mm (1 m)
8 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Double conector with JR adapter and 200 mm extension
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
2 x 3 LiPo XH>EH adapter
2 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x DPS Switch JR/JR
2 x OBECHI sheet 2.0x3.0x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
2 x Linden wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 10x10x1000 mm
2 x Linden wood slat 3.0x3.0x1000 mm
2 x BALSA trip 3.0x3.0x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Beech dowels 4.0 x 1000 mm
2 x BALSA trip 5.0x5.0x1000 mm
1 x Beech dowels 10 mm x 1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
1 x DPSI magnetic switch actuator (housing)
1 x Circlick securite
1 x Softshell Hispano Aviación
1 x Shirt Hispano Aviación
2 x Carbon fiber rod 2.0 mmx1000 mm
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Carbon fiber flat 1000x6.0x0.8 mm
2 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Squared carbon wing joinner 5x5x220 mm
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Brass control horn M2 large for wire (2pcs)
1 x Horn 6/35 with M3 Bearing
1 x Horn 6/20 with M3 Bearing
1 x Brass control horn M2 short for wire (2 pcs)
1 x 6 mm blue aluminium threaded horn with patella
1 x 5 mm M2 variable horn
1 x 6 mm M3 variable inclined horn
1 x Horn F3A de Titanium 16 mm (2 units)
1 x 5 mm M2 variable inclined horn
1 x Extra-long adjustable aluminium control horn 2,8x34
1 x Brass control horn M2 long for wire (10pcs)
1 x Horn mando long (2 pcs)
1 x Horn for flap control (1 pcs)
1 x Extra long horn 60x30
1 x Horn 6/27 with M3 Bearing
1 x 20 mm carbon horn
1 x Horn 20x28,5 mm (2 pcs)
1 x Brass control horn M4 short for wire (4 pcs)
1 x Horn DU-BRO 1/2 (2 pcs)
1 x Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x Angled clevis with threaded rod M3
1 x Long ball link M3 (6 uds)
1 x SPARK Switch 5.9v
1 x PSC 5
1 x 5 LiPo XH>EH adapter
1 x Cabling for Fox MDM1 wings
1 x Support conector MPX (6 pcs)
1 x Extension 5 lipos JST - JST/C
1 x PSC 6
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Prolonguer for Balancer Thunder Power 6S
1 x A/C quality beech plywood 600x300x1.5 mm
1 x Balsa panel 1.0x100x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x TP/TopFuel - XH 2/3S Adapter
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Interruptor RX/Batterie
1 x Balsa panel 1.5x100x1000 mm
1 x A/C quality beech plywood 600x300x6.0 mm
2 x A/C quality beech plywood 600x300x5.0 mm
1 x 22 mm Cut Disc Proxxon/Dremmel
1 x 
1 x 2,0x50 mm allen screwdriver
1 x Ball Link Plier
1 x DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Brass wire 0.5 mm (25 m)
1 x Fresa corte diamante Ø 2.35mm (flame)
1 x Fresa corte diamante Ø 2.35mm (lentil)
1 x Outboard Aqua-Race 60
1 x 120x60 mm SLH KOVO wheel
1 x Propeller RF CFK 14.5x14
1 x Propeller CFK 15x16
1 x Propeller CFK 14x6.5
1 x Turbina KINGTECH K320 G5
1 x Power supply NT 25 Amp.
1 x Propeller CFK 11x8
1 x Propeller CFK 13x9
1 x Propeller CFK 17x13
1 x Propeller CFK 15.5x10
1 x Propeller CFK 14.5x10 Slim
1 x Propeller CFK 12X6
1 x Propeller CFK 16x13
1 x Propeller CFK 12.5x7
1 x Propeller CFK 16x16 Wide
1 x Propeller CFK 16x17
1 x Connector Sub-D 2+5 Female
1 x EDGE 540-A 105" (2660 mm)
1 x Propeller APC 10x5.5 MR Electric multirrotor
1 x Propeller APC 13x6.5 Electric
1 x Propeller APC 11x7 SF
1 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x FIALA Propeller 23x8 Electric
1 x Propeller MEJZLIK 20x10 Electric light (36 g)
1 x Jodel D.9 BeBe 2.400 mm Kit
1 x BALSA trip 10x10x1000 mm
1 x 4 LiPo XH>EH adapter
1 x Motor OS 3820-1200 electric
1 x APM2.6 Power module with 5.3V DC BEC
1 x Propeller MENZ-S 18x10 3-Blades
1 x Propeller MENZ-S 18x8 3-Blades
1 x Propeller APC 13x4 Electric
1 x Servo Dymond D 37 Eco
1 x Profile ABS half cane 2.0x1000 mm
1 x Aero-Master (Aero-naut)
1 x FIALA Propeller 19x12 Electric
1 x Cable Cargador FUTABA
1 x Capstan of plastic 91x44x45 mm
1 x White silicone 0,25 qmm wire (100 m)
1 x Extension MPX-MPX 20 cm
9,318.99EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies