1 x | Hovercraft sailcloth |
1 x | Nitroverdu 500 ml |
2 x | Plasti Dip Liquid Tape 429 ml black |
1 x | PARTALL® Hi-Temp Wax, 340 g |
3 x | PPM Encoder Module |
2 x | Digital Air Speed Sensor And Pitot Tube Set |
2 x | Tube Pitot to PIXHAWK |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Canopy Latch |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | One touch canopy lock |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Covered closure or fairings |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Cockpit plastic closing |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | SUS wire 3m (nylon coated) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Yellow smoke canister 65 g |
1 x | White smoke canister 140 g |
1 x | Circlick securite |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Pilot "Goose" (Slimline) |
1 x | Oracover GREY Seafire Sea 2m |
1 x | Oracover Brown 2 m |
1 x | 45 mm rods set for direction control |
1 x | Support Pitot JETI |
3 x | MAMBO 17 |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Recessed MPX connector support (6 pcs) |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Hobbylite Filler, Balsa colour |
1 x | 1000 ml sealer (DOPE) |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
3 x | |
1 x | Partall paste 650 g |
3 x | Tapa estado carga XT-60 (6 pcs) |
2 x | Support Filtro FESTO |
2 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
1 x | Propeller POWER-PROP 7x7 |
3 x | Jet Afterburner Simulator NF-Jet2 |
3 x | Jet Afterburner Simulator NF-Jet3 RY |
3 x | Jet Afterburner Simulator NF-Jet1RY Set |
3 x | NF-3m Heli Kit |
3 x | NF-3 RC set |
1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
2 x | MEKP Harderner 100 g |
1 x | Hardener Aero EPH 161 (250 g) |
2 x | Premium servo extension 50cm |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
1 x | White gelcoat 1 Kg |
1 x | Epoxy SLOW-CURE™ 30 min (260g) |
1 x | Epoxy QUIK-CURE™ 5 min (260g) |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | ProgBOX MASTER Hacker |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | 80 mm rods set for direction control |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Snap for floding prop for 2 mm axi |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Turbina JetsMunt VT98 NG |
1 x | FOD guard for VT80BL, M90, M100K, M100XBL, M140K, M140XBL and M |
1 x | Xoar Electric Beechwood Prop 16x7 |
1 x | Scale exhaust K45TP |
1 x | |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | XH male balance (6S) connector (2 pcs) |
1 x | XH male balance (8S) connector (2 pcs) |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
1 x | Turbine KingTech K30G Restart |
2 x | Servo NARO Max Std |
1 x | Kerostarter K30G |
1 x | Exhaust K45TP |
1 x | Battery LiFe -1450/25C-3S 9.9V |
2 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | Turbina KINGTECH K320 G5 |
1 x | Battery LiFe -3000/25C-3S 9.9V |
1 x | Filter KingTech |
1 x | Turbine KINGTECH K160 G4 |
1 x | Battery LiFe -2100/25C-3S 9.9V |
1 x | Bomba KP500V Kingtech |
1 x | Support XT60 conector (2 pcs) |
1 x | Support ECU Xicoy X-45 |
1 x | Motor A50-14 L 8-Polos Electric turbine |
1 x | NF-3X-350 set |
1 x | FesEx-Uni6 System |
1 x | Prop Saver for AXI 22xx/xx |
1 x | Fiberglass motor-holder for electric motors |
1 x | Cables suitable for the motor AC 28/7 |
1 x | Frontal support Speed 400/480 |
1 x | Electric coversion set |
1 x | PYRO 700-56L |
1 x | KIRA 400-39 5,2:1 |
1 x | ASK 21 6.8m |
1 x | KIRA 600-20 |
1 x | ASW 20 5000 mm with winglets (Airwold) |
1 x | VAGABOND 1500 mm ARF V2 (Red) |
1 x | DG-303 ACRO 3750 mm (Airworld) |
1 x | FOX MDM-1 3.500 mm ARF White |
1 x | PYRO 750-50L Competition |
1 x | KIRA 600-22 6,7:1 |
1 x | LUNAK 4,00 m |
1 x | KIRA 500-36 6,7:1 |
1 x | GP 15 JETA |
1 x | PYRO 650-103 Long Axi |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
1 x | Silicone black 4,0 qmm wire (25 m) |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Angle support XT60 conector |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Motor A40-10S V4 14-Pole |
1 x | Motor A40-14 L 14-Pole V4 |
1 x | Jet Afterburner Simulator NF-Jet2YY Set |
1 x | Motor A50-14L Turnado V3 Glider |
1 x | 5 line servos wire black (1 m) |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Prolongador S-Bus JR/JR 20cm |
1 x | FesEx-Uni8 System |
1 x | AXI Cooler 22xx |
1 x | Universal Prop Saver |
1 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
1 x | AXI Cooler 41xx |
1 x | Prop Holder AXI 41xx V2 |
1 x | Motor holder AXI |
1 x | 8 mm Adapter for AXI53xx |
1 x | Ø 28 mm fiberglass motor-holder for electric motors |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | Motor mount for 1 m models |
1 x | Central support Speed 600 |
1 x | Motor mount for 1200 mm models |
1 x | Motor holder AXI |
2 x | Cooler motor type 300 |
1 x | Cooler motor type 400 |
1 x | Ø 40 mm fiberglass motor-holder for electric motors |
1 x | Indoor motor holder |
1 x | Receiver bed (Blue) |
1 x | Motor holder for AC 28/7 |
1 x | Central support Speed 280 |
1 x | Frontal support Speed 280 |
1 x | Size "M" motor holder for class 400 |
1 x | Motor Mount for Multiplex FunJet |
1 x | Bearings for motor HACKER C50 |
1 x | Frontal support Speed 600 |
1 x | Motor Scorpion HKIII 4035-560 Kv |
1 x | Size "L" motor holder for class 600 |
1 x | Size "M" motor holder for class 600 |
1 x | Hacker A30-S Radial Set |
1 x | Fan for A60 |
1 x | A50 Motor Mount Alu complete set |
1 x | A60 Motor Mount Alu complete set |
1 x | 10 mm gas motor standoff |
1 x | Fox 4000 mm with flaps (Airwold) |
1 x | Support pumb/filter Xicoy X45 |
1 x | LO 100 ARC 3.3m,cabina |
1 x | LO 100 ARC 3.3m |
1 x | Swift ARF 2000 mm Red (Hacker Model) |
1 x | KIRA 600-16 |
1 x | Fox MDM 1 4000 mm DeLuxe |
1 x | KIRA 480-31 5,2:1 |
1 x | LO 100 Scale 1:2 - Modellbau Bruckmann |
1 x | PYRO 800-40 Long Axi |
1 x | ASH 31 6.08m Composite Hollow Molded |
1 x | Fox MDM 1 4000 mm Std. |
1 x | KIRA 480-34 |
1 x | Kobuz 5000 mm (Airwold) |
1 x | VAGABOND 1500 mm ARF V2 (Blue) |
1 x | KIRA 400-27 |
1 x | KIRA 600-20 6,7:1 |
1 x | BLANIK 50 V2 Silver/Blue (SebArt) |
1 x | Fox MDM 1 4000 mm DeLuxe,Panel instrument Fox MDM 4m |
1 x | Fox MDM 1 4000 mm DeLuxe,wing joiner |
1 x | ASH 31 Mi Scale:1/3 - 7m, elevator |
1 x | KIRA 600-17 |
1 x | KIRA 480-26 5,2:1 |
1 x | Fox 4000 mm (Airwold) |
1 x | KIRA 600-38 6,7:1 |
1 x | Fox MDM 1 6000 mm |
1 x | PYRO 750-50L |
1 x | Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f |
1 x | KIRA FAI 5F5/4s |
1 x | Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe |
1 x | DG-303 ACRO 3750 mm, canopy |
1 x | DG-303 ACRO 3750 mm, winglets |
1 x | BLANIK 50 V2 Silver/Blue (SebArt), cabina |
1 x | KIRA 600-24 6,7:1 |
1 x | LIBELLE Standard 3.8m D-box H-201 |
1 x | DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV) |
1 x | KIRA 480-43 5,2:1 |
1 x | KIRA 400-34 |
1 x | PYRO 700-45 Long Axi |
1 x | LO 100 ARC 3.3m,frame canopy |
1 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
1 x | PYRO 800-48 Long Axi |
1 x | PYRO 600-11 |
1 x | Fox 4000 mm Airworld,cabina |
1 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
1 x | Surprise XII Rudder (Freudenthaler) |
1 x | ASW 15 5000 mm (Airwold) |
1 x | KIRA 500-30 6,7:1 |
1 x | PYRO 900-52L |
1 x | Fox 4000 mm Airworld,canopy frame |
1 x | Fox MDM-1 ARF 3.5m Orange |
1 x | PYRO 600-12 |
1 x | DISCUS 2A De Luxe 3.750 mm (Topmodel) |
1 x | KIRA 500-26 6,7:1 |
1 x | Fournier RF-4D |
1 x | KIRA 480-38 5,2:1 |
1 x | resin-hardener L-385 H-385 (625 g) |
1 x | Epoxy MID-CURE™ 15 min (130g) |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | Mould Resin P 10 kg |
2 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | Caps multicolor Switch JETI |
1 x | DUPLEX 2.4 EX MBar |
1 x | DUPLEX 2.4EX Satellite receiver Rsat 2 |
1 x | DUPLEX 2.4EX MT 125 temperature sensor |
1 x | DUPLEX 2.4EX MAlti (Rev.2) |
1 x | DUPLEX 2.4EX MFlow2 Gas 800 |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | Black tray 2,4EX DC-16/14/24 black |
1 x | AddCAP 10AS capacitors |
1 x | DUPLEX 2.4EX MT 300 EX |
1 x | Car Charger DC/DS-16 |
1 x | Battery RX JETI LiIon RB 6200 7.2v |
1 x | Jeti Box mini |
1 x | DUPLEX 2.4EX MU 3 Sensor |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
2 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
1 x | Battery RX JETI LiIon RB 5200 7.2v |
1 x | DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS |
1 x | DUPLEX 2,4GHz MRPM EX |
1 x | DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 |
1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | DUPLEX 2.4 EX MVario2 |
1 x | Battery RX JETI LiIon RB 3100 7.2v |
1 x | DUPLEX 2.4EX Central Box 320 |
1 x | DUPLEX 2.4EX Expander E4 |
1 x | DUPLEX 2.4EX MUI 75 |
1 x | DUPLEX 2,4GHz MRPM-AC EX |
1 x | DUPLEX 2.4EX Expander E2 |
1 x | DUPLEX 2,4EX Stick with 2-Position Switch for Transmitter DC/DS |
|
70,700.57EUR |