Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Beaver DHC-2 DeHavilland 3000mm White/Black CYMODEL
975.02EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	CC 02
3 x	CC 01
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	BEC 3A FOXY
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	UBEC 6A KAVAN
2 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x	CC 03
2 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	Dean "T" - Futaba Adapter
1 x	Connector Sub-D 2+5 Female
2 x	Cabling for Fox MDM1 wings
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x	CM-3
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
2 x	30 cm BEC cable (male)
3 x	3 copper lacquer wire Ø0,2 mm (1 m)
2 x	Connector CAN 15
1 x	Connector Sub-D 2+5 Male
2 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x	5 LiPo XH>EH adapter
1 x	Cabel charger transmitter GRAUPNER
1 x	Canopy Latch
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Steering arm 16 mm Ø 4 mm
2 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Locking cable tie 3.2x142 (uds)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
2 x	Covered closure or fairings
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
2 x	Electric spoiler 250 mm (2 pcs)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	SUS wire 3m (nylon coated)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Horn 6/35 with M3 Bearing
1 x	Horn 6/27 with M3 Bearing
1 x	6 mm blue aluminium threaded horn with patella
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Small aluminium horn gold (2pcs)
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
2 x	Cable with accesories
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	6 mm aluminium horn with patella
1 x	Horn 5/20 with M2 Bearing
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Horn 5/15 with M2 Bearing
1 x	Horn 5/10 with M2 Bearing
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Horn with ball 40x30
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Brass control horn M4 short for wire (10pcs)
2 x	RH long aluminium horn (2pcs)
1 x	SlowFlyer control horn (3 pcs)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x	Horn 13,5x16 mm (2 pcs)
1 x	30 cm BEC cable (female)
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Double conector with JR adapter and 200 mm extension
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	3 LiPo XH>EH adapter
3 x	CC 05
2 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Adapter lead MPX/EC3
1 x	DPSI Ampere battery backer
1 x	Blue metalic ball link M2/2 azul (2 pcs)
1 x	Profile ABS triangular 4.0x1000 mm 90º
1 x	Profile ABS Square 4 x 1000 mm
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Interface Realflight Simulator
1 x	AX-60 starters (5 pcs)
1 x	Glases Nimbus
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	Balsa panel 5.0x100x1000 mm
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	140 mm rods set for direction control
1 x	45 mm rods + T patellas set for direction control
2 x	38x4,5 mm wires output (2 pcs)
2 x	Tip wing protector 40x14 (2 pcs)
1 x	Split M1,2x10 (10 pcs)
1 x	Allen wheel collar M3x3
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Wing bolts M3 Steel screw blue (2 pcs)
2 x	Wheel collar 3.5 mm Ø (4 uds)
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	SBEC 40
1 x	20 mm carbon horn
1 x	USB interface ALTIS
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	Electric spoiler 300 mm (2 pcs)
1 x	13 mm wing servo holder
1 x	LiPo Storage Box Type "P"
1 x	Avia spare fouselage CF reinforced (Top Model)
1 x	Foil for sticking flaps and ailerons
1 x	ARTIST 1.560 mm
1 x	18 mm wing servo holder
1 x	Albatros ,spare cockpit (Top Model)
1 x	Battery bed V2_S (black)
1 x	Bidule 111 3000 mm
1 x	Spring clamp for tube Ø29 mm ext 1pc
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Canopy Astra
1 x	Astra (Top Model)
1 x	LiPo Storage Box Standard 1 Type 1
1 x	Sanyo RX Battery Eneloop 4,0 V AAA JR
1 x	Bidule 55 V3 2460 mm
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	RX Battery Eneloop 4,8 V JR 2500 mAh
1 x	Sanyo RX Battery Eneloop 4,8 V JR
1 x	Sanyo TX Battery Eneloop 7,2 V MPX
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Cockpit metalic closing
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Mudguard for 140/165 mm wheels
2 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
2 x	Wheel collar 2 mm Ø (4 uds)
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Extra long horn 60x30
2 x	Long adjustable control horn 3x34
1 x	5 mm M2 variable horn
1 x	Horn mando small (2 pcs)
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	Horn DUBRO 1/2A
1 x	Pins M connect Multipin connectors AWG 20-24
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	SPARK Switch 12v
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	T-shape holder metal LAMA
1 x	Multi-adapter balancer JST - TP
1 x	SPS Remote switch actuator
1 x	TrainerCord (master-learner)
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	Extension 2/3 lipos JST - JST/C
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Landing gear frontal support 29x26x13,5
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x	41x5,5 mm wires output (2 pcs)
1 x	Cable tie mounts 4.3 (4 uds)
1 x	Wheel collar 6 mm Ø (4 uds)
1 x	Landing gear frontal support 25x32x16
1 x	Pushrod octagone 3/2 with coupler M2
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	Wheel collar 3 mm Ø (4 uds)
1 x	28x5 mm wires output (2 pcs)
1 x	Lipo FOXY G3 4500 mAh 11.1v 40/80C
1 x	Propeller CFK 20x13
1 x	XPower H PROP HUB Ø5.0/20mm +2,5°
1 x	Towing hook
1 x	Towing hook
1 x	80 mm rods set for direction control
1 x	Propeller Pleg CAM-Prop 8x6
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Propeller POWER-PROP 14x12
1 x	Propeller electric carbon 8.5x5
1 x	Soporte filtro FESTO (4 pcs)
1 x	BULL MØ1 2.600mm BLUE
1 x	Softshell Hispano Aviación
1 x	Fuselage BULL MØ1 2.600mm
1 x	Propeller APC 12x6 SF
1 x	Propeller APC 10x5.5 MR Electric multirrotor

11,592.58EUR