2 x | CC 02 |
3 x | CC 01 |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | BEC 3A FOXY |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | UBEC 6A KAVAN |
2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
2 x | CC 03 |
2 x | Copper lacquer wire Ø0,2 mm (5 m) |
2 x | Dean "T" - Futaba Adapter |
1 x | Connector Sub-D 2+5 Female |
2 x | Cabling for Fox MDM1 wings |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | CM-3 |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
2 x | 30 cm BEC cable (male) |
3 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
2 x | Connector CAN 15 |
1 x | Connector Sub-D 2+5 Male |
2 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
2 x | 5 LiPo XH>EH adapter |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Canopy Latch |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Steering arm 16 mm Ø 4 mm |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
2 x | Covered closure or fairings |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
2 x | Electric spoiler 250 mm (2 pcs) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | SUS wire 3m (nylon coated) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Horn 6/35 with M3 Bearing |
1 x | Horn 6/27 with M3 Bearing |
1 x | 6 mm blue aluminium threaded horn with patella |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | Horn 20x28,5 mm (2 pcs) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Small aluminium horn gold (2pcs) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
2 x | Cable with accesories |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | 6 mm aluminium horn with patella |
1 x | Horn 5/20 with M2 Bearing |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Horn 5/15 with M2 Bearing |
1 x | Horn 5/10 with M2 Bearing |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Horn 16,5x20 mm (2 pcs) |
2 x | Horn with ball 40x30 |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Brass control horn M4 short for wire (10pcs) |
2 x | RH long aluminium horn (2pcs) |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
2 x | Horn 13,5x16 mm (2 pcs) |
1 x | 30 cm BEC cable (female) |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | 3 LiPo XH>EH adapter |
3 x | CC 05 |
3 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Adapter lead MPX/EC3 |
1 x | DPSI Ampere battery backer |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Interface Realflight Simulator |
1 x | AX-60 starters (5 pcs) |
1 x | Glases Nimbus |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | 140 mm rods set for direction control |
1 x | 45 mm rods + T patellas set for direction control |
2 x | 38x4,5 mm wires output (2 pcs) |
2 x | Tip wing protector 40x14 (2 pcs) |
1 x | Split M1,2x10 (10 pcs) |
1 x | Allen wheel collar M3x3 |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
3 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
1 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | SBEC 40 |
1 x | 20 mm carbon horn |
1 x | USB interface ALTIS |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Electric spoiler 300 mm (2 pcs) |
1 x | 13 mm wing servo holder |
2 x | LiPo Storage Box Type "P" |
1 x | Avia spare fouselage CF reinforced (Top Model) |
1 x | Foil for sticking flaps and ailerons |
1 x | ARTIST 1.560 mm |
1 x | 18 mm wing servo holder |
1 x | Albatros ,spare cockpit (Top Model) |
1 x | Battery bed V2_S (black) |
1 x | Bidule 111 3000 mm |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Canopy Astra |
1 x | Astra (Top Model) |
1 x | LiPo Storage Box Standard 1 Type 1 |
1 x | Sanyo RX Battery Eneloop 4,0 V AAA JR |
1 x | Bidule 55 V3 2460 mm |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | RX Battery Eneloop 4,8 V JR 2500 mAh |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
1 x | Sanyo TX Battery Eneloop 7,2 V MPX |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Cockpit metalic closing |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Mudguard for 140/165 mm wheels |
2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
2 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Extra long horn 60x30 |
2 x | Long adjustable control horn 3x34 |
2 x | 5 mm M2 variable horn |
1 x | Horn mando small (2 pcs) |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
2 x | Horn DUBRO 1/2A |
1 x | Pins M connect Multipin connectors AWG 20-24 |
2 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | SPARK Switch 12v |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | PWC4 wing/fuselage connector for 4 servos |
2 x | T-shape holder metal LAMA |
1 x | Multi-adapter balancer JST - TP |
1 x | SPS Remote switch actuator |
1 x | TrainerCord (master-learner) |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | Prolonguer for Balancer Thunder Power 6S |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | Landing gear frontal support 25x32x16 |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Lipo FOXY G3 4500 mAh 11.1v 40/80C |
1 x | Propeller CFK 20x13 |
1 x | XPower H PROP HUB Ø5.0/20mm +2,5° |
1 x | Towing hook |
1 x | Towing hook |
1 x | 80 mm rods set for direction control |
1 x | Propeller Pleg CAM-Prop 8x6 |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Propeller POWER-PROP 14x12 |
1 x | Propeller electric carbon 8.5x5 |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | BULL MØ1 2.600mm BLUE |
1 x | Softshell Hispano Aviación |
1 x | Fuselage BULL MØ1 2.600mm |
1 x | Propeller APC 12x6 SF |
1 x | Propeller APC 10x5.5 MR Electric multirrotor |
1 x | Lipo RAY 2200 mAh 2s 7.4v 30C |
1 x | Propeller CFK 16x16 Slim |
1 x | Propeller CFK 23x12 |
1 x | Propeller CFK 15x13 Slim |
1 x | Propeller CFK 17x13 |
1 x | Propeller RF CFK 14.5x14 |
1 x | Propeller RF CFK 13x7 |
1 x | THERMIK DREAM 3.000 mm (Topmodel) |
1 x | Tow hook for tug |
1 x | Cockpit aluminium closing 5.4g |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Propeller electric carbon 9.5x7 |
1 x | Propeller POWER-PROP 13x9 Izda |
1 x | Propeller electric carbon 7x7 |
1 x | Propeller POWER-PROP 14x10 |
1 x | Propeller electric carbon 8.5x7 |
1 x | Propeller electric carbon 9.5x6 |
1 x | Tank ULTIMATUM 2.0 (3.2 L) PRO |
1 x | ULTIMATUM 2.0 m green/black |
1 x | ULTIMATUM 2.0 m yellow/blue |
1 x | Wing Joiner ULTIMATUM 2.0 m |
1 x | BULL MØ1 2.600mm "RED BULL" |
1 x | Shirt Hispano Aviación |
1 x | Canopy BULL MØ1 2.600mm |
1 x | BULL MØ1 2.600mm "ALPINE" |
1 x | ULTIMATUM 2.0 m orange/blue |
1 x | BULL MØ1 2.600mm GREEN |
1 x | ULTIMATUM 2.0 m white |
1 x | BULL MØ1 2.600mm ORANGE |
1 x | BULL MØ1 2.600mm (mono color) |
1 x | BULL MØ1 2.600mm "AeroPANDA" |
1 x | Tank ULTIMATUM 2.0 (3.2 L) + Smoke (0.9 L) PRO |
1 x | Set transmisions BULL Mo1 (dura/aluminium) |
1 x | Vest clothes Hispano Aviación |
1 x | BULL MØ1 2.600mm RED |
1 x | ULTIMATUM 2.0 m Red Bull |
1 x | Bags de Luxe ULTIMATUM 2.0 |
1 x | Propeller APC 12x8 Electric |
1 x | Propeller APC 14x10 Electric |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Logo 400 SE VBar |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Horn 6/20 with M3 Bearing |
1 x | VBar NEO VLink 6.x Express, neon-yellow |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
2 x | Blade holder metal LAMA |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Cable control set |
1 x | Flybar support metal LAMA |
|
56,747.73EUR |