Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA85080

16.00EUR

EWC3 40 cm wing connector
[EMCA85080]

EWC3 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Spinner 159x200 mm GFK temporarily out of stock	DUPLEX 2.4EX MU 3 Sensor temporarily out of stock	Quick hose connector 4-4 mm temporarily out of stock
Cockpit aluminium closing temporarily out of stock	Conector JR/Uni Servo male BLUE silicon (10 pcs) temporarily out of stock	Blue aluminium servo arm V2-Hitec 1,0 inch M3 temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DUPLEX backpack for Jeti DS handheld transmitter
58.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models)
2 x	Fox MDM 1 4000 mm DeLuxe
2 x	Swift 5050 mm (Airwold)
2 x	Elevator VENTUS 2cx 4.5m
1 x	SHK 4000 mm Scale 1:4.25, V-Tails
1 x	Fournier RF-4D
3 x	SAGITA Alsema 4.0 m
1 x	ASW 15 5000 mm (Airwold)
2 x	LUNAK 4,00 m
1 x	Fox MDM 1 6000 mm
1 x	LS-8 GFK 6m Glider
2 x	Gobe R-26S (Airwold)
1 x	DISCUS 2A De Luxe 3.750 mm (Topmodel)
1 x	Fox 4000 mm with flaps (Airwold)
1 x	LO 100 ARC 3.3m,frame canopy
2 x	SOLOFOX 5m Voll-GfK
1 x	DG-303 ACRO 3750 mm, winglets
1 x	Ventus 2cx 4.5 m Sapare Fuselaje
2 x	Kobuz 5000 mm (Airwold)
1 x	Fox MDM 1 4000 mm DeLuxe,cabina
1 x	Fox MDM 1 4000 mm Std.
2 x	Fox 4000 mm (Airwold)
2 x	Swift S1 De-luxe JEPPESEN 3.140 mm
2 x	SHK 4000 mm Scale 1:4.25
1 x	DG-303 ACRO 3750 mm (Airworld)
2 x	Swift S1 De-luxe 3.140 mm
2 x	LO 100 ARC 3.3m
1 x	LO 100 Scale 1:2 - Modellbau Bruckmann
1 x	SZD-56 Diana-2 Carbon D-box wing
1 x	Ventus 2cx 4.5 m Bag canopy
1 x	Fox MDM-1 ARF 3.5m Orange
1 x	Fox MDM 1 4000 mm DeLuxe,wing joiner
1 x	GP 15 JETA
1 x	Ventus 2cx 4.5 m Winglets
1 x	FANTASY ARF 3.0m, Fundas alas
1 x	ENIGMA ARF
1 x	THERMIK XL 4000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Ventus 2cx 4.5 m de Luxe
1 x	ASK 21 6.5m + pylona
1 x	Spinner Alumin. fixed propeller 30 mm / 3,2 mm
1 x	Balsa panel 6.0x100x1000 mm
1 x	Cabling for Fox MDM1 wings
2 x	Adapter lead MPX/EC3
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	BALSA trip 3.0x5.0x1000 mm
2 x	Pin hinge 39x20 mm (10 uds)
2 x	Dean "T" - Futaba Adapter
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Cable coupler M2x66 (2 uds)
1 x	CC 03
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Cable coupler M2 (10 uds)
2 x	Connector CAN 15
1 x	Interface Realflight Simulator
1 x	18 mm reinforced hinge
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Extra Hard Titanium Herxagon Screwdrivers
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	2,4x1000 mm 2:1 red termoretract tube
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Extra long horn 60x30
1 x	10 mm floating pad (72 pcs)
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Horn with ball 40x30
1 x	ABS tube 4.0x2.0x1000 mm
1 x	ABS tube 5.0x4.0x156 mm
1 x	ABS tube 7.0x6.0x1000 mm
2 x	Conector JR Servo male (10 pcs)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Conector JR Servo male (50 pcs)
1 x	Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	6 mm aluminium horn with patella
1 x	75 mm INO spinner (carbon imitation)
1 x	45 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x	Fox MDM 1 4000 mm DeLuxe,Panel instrument Fox MDM 4m
1 x	Ventus 2cx 4.5 m Canopy
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL
1 x	102 mm INO spinner (carbon imitation)
1 x	89 mm INO spinner (carbon imitation)
1 x	Spinner Alumin. fixed propeller 50 mm / 5,0 mm
1 x	Spinner plastic black fixed propeller 30 mm
1 x	ARTIST 1.560 mm
2 x	Cabin latch Fox MDM1 4m (pair)
2 x	120x60 mm SLH KOVO wheel
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Gates hinge
1 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	Servo slow down unit (0,7-14,7 sec )
1 x	Roller cutter 28 mm
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x	PVC transparent red battery termo-retract 68 mm (10 m)
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Extension 2/3 lipos JST - JST/C
1 x	PSC 5
1 x	Laminating brush 10 mm, pack/ 50 pcs
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	MPX plug mold V1
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Flap hinge (6 pcs)
1 x	Screwdriver for Torx® TX8
1 x	Tube bender
1 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Universal Filter
1 x	Sealing Iron Sleeve PROF
1 x	Steel brush wheel with 2.35mm
1 x	CC 01
1 x	CC 02
1 x	Landing gear retract neumatic (Jet Legend)
1 x	Blind nut M8 (10 pcs)
1 x	Nut for mounting M5 (4 pcs)
1 x	Treaded hexagonal socket insert M4 Br (4 pcs)
1 x	Mini neumatic retract 4 mm landing gear (Het-rc)
1 x	Hexagonal Nut M2 (10 pcs)
1 x	Threaded insert M4 (4 pcs)
1 x	Nut for mounting M2,5 (4 pcs)
1 x	Hose connector stopper 4 mm
1 x	Field folding model stand SebArt
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	XH male balance (7S) connector (2 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	MR30 connector male
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Connectors DEANS (T) micro
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Propeller balancer
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Switch Cap L (silver)
1 x	ABS tube 12.0x10.0x1000 mm
1 x	Battery FUTABA 18MZ
1 x	TX 250 mW especial GOPRO
1 x	ABS tube 9.0x8.0x1000 mm
1 x	Slave-cable USB Easy Sim
1 x	GameCommander USB Universal
2 x	Stickers-digit for marking
1 x	Tool for entel
1 x	Miniature brass strap hinge, 1 m
1 x	SWTU2 switch
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Tool for entel
1 x	UBEC 6A KAVAN
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Small pinned hinge (12 uds)
1 x	Male Prolonger TP 4/5S
1 x	MPX 8 pins plug mold
1 x	Extension 6 lipos XH > EH
1 x	MAX BEC 2D plus EX
1 x	Micro flex hinge (12 uds)
1 x	Multi-adapter balancer JST/C - TP
1 x	SPS Remote switch actuator
1 x	SPS 70V 100/200 A
1 x	Propeller diller for EME35 and DLE35
1 x	Propeller diller for DLE111 and DA85-150
1 x	Opto Gas Engine Kill Switch
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x	Long pinned hinge (12 uds)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Mold plugs XT-90
1 x	Propeller diller for DLE170
1 x	Magnetic Interruptor MULTIPLEX
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	PowerBox SparkSwitch RS
1 x	Extension 5 lipos JST/C
1 x	Extension 2/3 lipos JST/C
1 x	PVC yellow transparent battery termo-retract 69 mm (10 m)
1 x	SPS 70V 140/280 A
1 x	Long Switch On/Off micro
1 x	Heat Seal Iron
1 x	Large flex hinge (12 uds)
1 x	Robart Door Hinge (Pk2)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Indoor hinge with servo arm integraded
1 x	MAX BEC 2
1 x	SBEC 40
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	100g Flux Paste for Silver Solder
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Small pinned hinge (6 uds)
1 x	Sealing Iron Profi LCD
1 x	SIG Coverall 1.2x1.8 m
1 x	XT-60 Plug Mold
1 x	Pistola termica MH 550 micro
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Small flex hinge (12 uds)
1 x	Spare round blades, 28 mm, pack/ 2 pcs.
1 x	Switching module high voltage SXH
1 x	Pins M connect Multipin connectors AWG 20-24

67,327.23EUR