Top » Catalog » Hardware » Cables » POWER1009/1

2.50EUR

1 m servo "Premium" wire (white/red/blue)
[POWER1009/1]

Product description:
Premium servo cable is manufactured specially for PowerBox Systems. The cable is extremely flexible, and is made up using very thin individual strands in order to pass the maximum current through the given cross-sectional area of 0.35mm². The insulation is made of a special material which is also employed in full-size aviation. It is virtually indestructible, and offers excellent protection even when reduced to just a thin film around the copper conductor.

This insulation produces a weight reduction of about 30% compared with the conventional PVC. For comparison: in spite of its larger cross-section, the 0.35 mm² Premium cable offered here is lighter than standard 0.25 mm² PVC cable. The insulation is fire resistant, and its heat resistance is much higher than the usual PVC.

PowerBox Premium cable is available loose in 5.0 m or 10.0 m bundles. If you need different lengths, please contact us for a quote.

Features:
- 0.35 mm² cross section
- 30% weight saving
- Only 11g/m
- Fire resistant
- Robust isolation
- Employed in full-size aviation

temporarily out of stock

Reviews

Customers who bought this product also purchased

Aluminium red ball links M3 V1 (10 pcs) temporarily out of stock	Stainless steel cable Ø 0.88 mm - 60 kp (10 m) temporarily out of stock	Crimping sleeves for 1.1 mm cable (10 pcs) temporarily out of stock
Servoarm Aluminium SH-82 temporarily out of stock	Servoarm SH-81, two sides, aluminium temporarily out of stock	Esc MasterSPIN 99 Pro OPTO temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Receptor DUPLEX REX 7 Slim 2.4EX
114.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Hovercraft sailcloth
1 x	Propeller hub spacer 8/5.5
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Gold antispark 4 mm plug
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	Connectors DEANS (T)
2 x	Connectors banna oro 2 mm (M/F)
1 x	Premium servo extension 100cm
1 x	Extension silicon 30 cm male (Futaba)
1 x	Conector BEC male (10 pcs)
1 x	Extension silicon 10 cm (Futaba)
2 x	XH female balance (4S) connector (2 pcs)
1 x	Extension 100 cm (Futaba)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Premium servo extension 75cm
1 x	Premium servo extension 50cm
1 x	XH male balance (4S) connector (2 pcs)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
2 x	XH male balance (5S) connector (2 pcs)
1 x	MPX Sub-D Adaptor
2 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Connectors banna oro 3 mm (M/F)
2 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
2 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
2 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	XH male balance (2S) connector (2 pcs)
1 x	Cabel "Y" 15 cm
1 x	Extension 15 cm (Futaba)
1 x	Conector BEC female (10 pcs)
3 x	Prolongador S-Bus JR/JR 20cm
1 x	Gold antispark 5,5 mm plug
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	XH female balance (3S) connector (2 pcs)
2 x	Extension silicon 35 cm male (Futaba)
2 x	Wing connector 8pin with pin strip, plug & socket
1 x	XH female balance (2S) connector (2 pcs)
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Extension PVC 150 cm (Graupner)
1 x	Futaba male 40 cm extension
1 x	Optotronix Aurora Plug
1 x	Cable S.BUS 3 salidas 300 mm
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	Conector Servo female 4 pines
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	30 cm DEANS female connector
2 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	Extension 7.5 cm
1 x	Futaba Female 40 cm extension
1 x	White smoke bombs AX-18 (5 pcs)
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Para-RC "RC-Evo-Cross" Rescue
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	3,2 mm Prop Adapter M6
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	5.8G Receiver Helical Antenna with protecting case (SMA plug) 12
1 x	PIX Hawk with accesories
2 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Battery RX JETI LiIon RB 5200 7.2v
1 x	Battery EMCOTEC LiIon 3000 7.2v
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
2 x	Xplorer1 anemometro
1 x	Xplorer4 anemometro
1 x	LiPo Storage Box Type "BIG"
1 x	Balsa panel 6.0x100x1000 mm
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Balsa panel 1.0x100x1000 mm
2 x	Beech dowels 10 mm x 1000 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Balsa panel 4.0x100x1000 mm
1 x	Balsa panel 5.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Balsa panel 8.0x100x1000 mm
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Horn mando small (2 pcs)
1 x	Support XT60 conector (2 pcs)
1 x	Support Pitot JETI
1 x	Soporte grifo FESTO (2 pcs)
1 x	Support Flush MPX Conector (6 pcs)
1 x	LiPo Storage Box Type "P"
1 x	Extension silicon 30 cm female (Futaba)
1 x	Piñones SAVOX SH-0350
1 x	Servoholder Dymond DS 1800 MG Digital (2 pcs)
1 x	Extension silicon 35 cm (Futaba)
1 x	Metal gear set for HS81MG/5082MG
1 x	Servo Dymond D 37 Eco
1 x	Connector CAN 15
1 x	Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	Servo SAVOX SA-1256 TG
1 x	XH female balance (9S) connector (2 pcs)
1 x	Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x	Servo GO-1053 MG 20.0kg
2 x	Premium servo extension 25cm
1 x	MR30 connector female
1 x	Fast attachment for servos (25 pcs)
1 x	XH male balance (9S) connector (2 pcs)
1 x	Stickers-digit for marking
1 x	Extension silicon 10 cm (Graupner)
1 x	Extension silicon 25 cm (Futaba)
1 x	Servo TOPMODEL DS1413 T
1 x	XH male balance (6S) connector (2 pcs)
1 x	Cabel "Y" 30 cm (graupner)
1 x	Extinguisher CO2 - 2 Kg
1 x	Futaba Female 40 cm extension
1 x	Servo Tester
1 x	Propeller POWER-PROP 7x7
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Tester LiPo/LiIon/LiMn/LiFe
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Frontal support Speed 400/480
1 x	Size "M" motor holder for class 400
1 x	A60 Motor Mount Alu complete set
1 x	Metalic motor holder for class 550-600
1 x	Motor holder for AC 28/7
1 x	Motor Mega AC 22/45/03 E
1 x	Motor Mega AC 16/15/03
1 x	Cabel "Y" 30 cm (Futaba)
1 x	19 mm 2:1 black termoretract tube
1 x	20 g tin paste
1 x	Servo Robbe FS 128 BB MG HV Digital
1 x	SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS)
1 x	LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x	Tester LiPo/LiIon/LiMn/LiFe
1 x	Carbon plate 350x150x1.0 mm
1 x	PVC yellow transparent battery termo-retract 68 mm (1 m)
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Lite Plywood panel 600x300x3.0 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Xplorer3 anemometro
1 x	Pine wood slat 10x10x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Cooler motor type 150
1 x	Bearings for motor HACKER C50
1 x	Frontal support Speed 280
1 x	Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x	Motor mount for 1200 mm models
1 x	Motor Mega AC 16/15/07 COMBAT
1 x	A40-10S V2 8-Pole + 6,7:1 PG
1 x	MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless
1 x	Motor A200-8
1 x	Motor Mega AC CAR 10 PRO
1 x	3,0x60 mm allen screwdriver

4,928.64EUR