1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Head lower part New
1 x Prolongador S-Bus JR/JR 20cm
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Vacuum bag, 1200 mm x 50 m
1 x Blade holder upper
1 x Extension silicon 100 cm (Futaba)
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x 2 LiPo XH>EH adapter
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x Hot Glue Stick BLACK
1 x SE Ring 200 mm (2 pcs)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Starter 12v (Max 90 and 15ccm)
1 x Flat washer 1.7 mm (20 pcs)
1 x Vacuum pump 12 CFM
1 x 
1 x Vasa model Catapult
1 x PropCover 16-20" (2 pcs)
1 x Propeller MEJZLIK 22x10 Electric light (36 g)
1 x Propeller POWER-PROP 12x6
1 x Pine wood slat 1.5x3.0x1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Futaba male 40 cm extension
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x Autogyro Cierva C30 Spain
1 x Cabel charger transmitter GRAUPNER
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x BALSA trip 4.0x4.0x1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x 3 LiPo XH>EH adapter
1 x Extension silicon 30 cm female (Futaba)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Beech dowels 2.0 x 1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x Steering lever
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Pine wood slat 10x10x1000 mm
1 x SE Ring HACKER 300 mm (2 pcs)
1 x Quicklock washer 1 mm (10 pcs)
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x SE Ring 300 mm (2 pcs)
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Starter Sullivan-STAR 601
1 x SE Ring 450 mm (2 pcs)
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Z Bender - S Type Tool
1 x SE Ring 350 mm (2 pcs)
1 x SE Ring 400 mm (2 pcs)
1 x SE Ring 480 mm (2 pcs)
1 x SE Ring 250 mm (2 pcs)
1 x Ring 320 mm length (5 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Aluminium wide washer M3 red (4 pcs)
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x Anntena Panel 5,8 GHz - 14 dBi
1 x Head core bushing
1 x Head spacer
1 x LA500 pilot-seat set
3,302.43EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies