130.00EUR

Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
[ROIEV800D]


Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Dremel PERMAGRIT thin lime
1 x Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x 
1 x 6,4x1000 mm 2:1 green termoretract tube
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x Concave-Convex sandpaper file 13 mm
1 x Propeller balancer
1 x Connectors banna gold 5,5 mm (M/F)
1 x Vasa model Catapult
1 x Round Rod 5,0x1000 mm
1 x Conector JR Servo female (10 pcs)
1 x USB Mini Camera endoscope
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Conector FUTABA Servo female (10 pcs)
1 x 1/6 Pilot "Tony"
2 x Strip ABS 2.0x8.0x1000 mm
1 x Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x Bag connector 2 mm
1 x ABS I Strip 10x5x1000 mm
2 x Strip 1,5x1,5x330 mm
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x 1/6 Pilot "Garry"
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Clip mini fixing for wing (2 pcs)
1 x Cable grommet Ø 6.4 mm (4 uds)
1 x 1/4 Pilot "Mike"
1 x Connectors banna oro 3 mm (M/F)
1 x Conector Servo female 4 pines
1 x Connectors banna oro 4 mm (M/F)
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x Smoke set "S"
1 x Long ball link M1.6 (6 uds)
1 x Pin hinge 34x16 mm (10 uds)
1 x Joint with bearing M2,5 22x5,5
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x 6 mm ball link M3 (10 pcs)
1 x Initior Transmitter FTX2 Wireless
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x M3 Maxi ball link (2 uds)
1 x Short ball link M2 (6 uds)
1 x 3l Smoke oil
1 x Green smoke canister 65 g
1 x ABS tube 5.0x4.0x1000 mm
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Extension silicon 75 cm (Graupner)
1 x Ball link Aluminio M3 (2 pcs)
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x 30 cm BEC cable (female)
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Cable coupler M2x66 (2 uds)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 240 mm (2 pcs)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x 15 mm floating pad (30 pcs)
1 x CC 02
1 x Aluminium wide washer M4 Red (4 pcs)
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x DPSI magnetic switch actuator (housing)
1 x Cable S.BUS 3 salidas 100 mm
1 x Cable coupler M2 (10 uds)
1 x Kwik link AL M4 con Clip (2 pcs)
1 x Cable S.BUS 3 salidas 300 mm
1 x Aluminium M2x12 mm screw (4 pcs)
1 x Blind nut M5 (10 pcs)
1 x Foil for sticking flaps and ailerons
1 x Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x Tape GFK 50 mm
1 x Glases Moritz
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Cable coupler M2 (10 uds)
1 x Connector Sub-D 2+5 Female
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Extension silicon 100 cm (Futaba)
1 x Extension silicon 10 cm (Graupner)
1 x CC 05
1 x Extension silicon 10 cm (Futaba)
1 x Blind nut M4 (10 pcs)
1 x Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs)
1 x 200 mm extensión servo HITEC/JR
1 x SE Ring 360 mm (2 pcs)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Extension silicon 30 cm female (Graupner)
1 x Futaba Female 40 cm extension
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x BEC 3A FOXY
1 x Round Rod 1,0x1000 mm
1 x Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x Cierva C30 spanish decoration Stickers
1 x Head runner
1 x Cierva C30 Body Spain
1 x Head upper part
1 x Blade holder center
1 x Anntena Panel 5,8 GHz - 14 dBi
1 x Bearing 3x6x2,5
1 x White smoke bombs AX-9 (10 pcs)
1 x White smoke canister 100 g
1 x Ventral support for AX-18/AX-60
1 x 8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White
1 x White smoke canister 65 g
1 x Parachute expulsion foam
1 x Indoor hinge with servo arm integraded
1 x HITEC Power Supply 30A. Max. 540w
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Power supply NT 25 Amp.
1 x ABS Strip 1.5x8.0x1000 mm
1 x Strip 3,5x1,75x330 mm
1 x Round Rod 6,0x1000 mm
1 x Strip 2,5x1,25x330 mm
1 x Round Rod 4,0x1000 mm
1 x Strip ABS 2.0x3.0x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x ABS Strip 1.0x3.0x1000 mm
1 x Round Rod 1,25x1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x 800TVL CMOS camera for FPV
1 x Round Rod 2,0x1000 mm
1 x Round Rod 2,5x1000 mm
2,689.96EUR
Manufacturers
Manufacturer Info
Roi-Import
Roi-Import Homepage
Other products
Languages
Español English
Currencies