1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x ABS Strip 1.5x2.0x1000 mm
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Strip 1,5x1,5x330 mm
1 x Strip ABS 2.0x5.0x1000 mm
3 x Straightened rod Ø 0.5 mm x 1000 mm
3 x Brass rod Ø 0.5 mm x 1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
2 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
2 x Strip 2,0x2,0x330 mm
2 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
2 x Straightened rod Ø 0.8 mm x 1000 mm
2 x Strip 3,5x1,75x330 mm
2 x Brass rod Ø 0.8 mm x 1000 mm
2 x Straightened threaded rod M2-1m
2 x Strip ABS 2.0x3.0x1000 mm
1 x Straightened rod Ø 1.5 mm x 1000 mm
3 x ABS Strip 1.5x8.0x1000 mm
1 x Round Rod 1,0x1000 mm
1 x Round Rod 4,0x1000 mm
1 x Round Rod 6,0x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x Thixotropic agent TM 100, tin/ 415 g (approx. 5 l)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x 15 mm reinforced hinge
1 x Aro pasacable Ø25 mm (4 pcs)
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Round Rod 1,5x1000 mm
1 x Blade Holder (3 blades)
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Bearing 3x6x2,5
1 x Nut M1,6
1 x Strip 2,5x1,25x330 mm
1 x 
1 x Blades 330mm
1 x Blade holder upper
1 x Steering lever
1 x Servo HITEC D131 MW nano
1 x Red aluminium double servo arm FUTABA 2,5inch M3
1 x Servo HITEC HS-45 HB
1 x Servo lock HS-80/81/82/85 (2 pcs)
1 x ALU servo arm 90º 3 mm shaft
1 x Alu servo arm double RHINO
1 x Servo HITEC HS-5084 MG
1 x Red aluminium servo arm V1-Futaba 23 mm M2
1 x Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo
1 x Gold aluminium servo arm V1-JR 1,25" inch M3
1 x Servo HITEC HS-5475 HB Digi
1 x Blue aluminium servo arm V3-Hitec 1,25inch M3
1 x ALU double servo arm 3 mm shaft
1 x Red aluminium servo arm V2-Futaba 1,75" inch M3
1 x Servo HITEC HS-485 HB
1 x Red aluminium servo arm V1-Futaba 1,25" inch M3
1 x Servo HITEC D-955 TW Titanium
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Servo AN-8 HBA
1 x Servo HITEC D954 TW
1 x Blue aluminium servo arm V2-Hitec 2,0 inch M3
1 x Red aluminium servo arm V2-Futaba 1,25" inch M3
1 x aluminium servo arm V1-JR 1,0 inch M2
2 x Servo HITEC HS-5585MH
1 x Blue aluminium servo arm V2-Hitec 1,75" inch M3
1 x Double aluminium servo arm V1-Futaba 2,5 inch M3 (red)
1 x Gold aluminium double servo arm V3-JR 3.5 inch M3
2 x "L" servo arm 65x49 mm (2 pcs)
1 x Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x 1804 2400KV Brushless Motor Qav 250 mini
1 x Motor brushless 1806 - 2300 Kv Cuadracopter
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x resin-hardener package L-385 with hardener H-385 (3.5 Kg)
1 x Hardener Aero EPH 161 (500 g)
1 x resin-hardener L-385 H-385 (1250 g)
1 x Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x 1/12 Pilot "Fighter"
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x 22m Fitting barb
1 x 115x29 mm (4.50") Type jets aluminium core wheel
1 x 1/12 Pilot "Tom"
1 x 120x60 mm SLH KOVO wheel
1 x 160 mm carbon undercarriage (2pcs)
2 x 1/6 Pilot "Tony"
1 x Nut for 515/518/519 spinner special for Hacker
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x F3A carbon 75 mm spinner for Hacker C-50
1 x Cono NUT 5/16"x 24 -M4
1 x F3A carbon 85 mm spinner for Hacker Q-80
1 x Spinner plastic black fixed propeller 30 mm
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x F3A carbon 82 mm spinner for 12 mm axis
1 x Spinner INO 70 mm Chrome (Imitacion metal)
1 x Spinner Alumin. fixed propeller 50 mm / 3,2 mm
1 x 89 mm INO spinner (carbon imitation)
1 x 63 mm INO spinner (carbon imitation)
1 x Straightened threaded rod M3 - 1m
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Cotton Flocks, bag/ 500 g
1 x AC-10 pre-rotacion with motor
1 x Gear set HITEC HS-645MG/5645MG/5685MH
1 x Complete kit CAT 966G II WEDICO-construction-models
1 x Servo HITEC HS-82 MG
1 x ALU servo arm 3 mm shaft
1 x Blue aluminium double servo arm V3-Hitec 3,5inch
1 x Servo HITEC HS-311
1 x Servo HITEC HS-225 MG
1 x Gear set HITEC HS-85
1 x P 17×5.8 Prop-2PCS/PAIR
7,177.18EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies