1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Electric rocket starters (6 pcs)
1 x Red smoke canister 140 g
1 x Smoke set "S"
1 x White smoke canister 140 g
1 x Plastic caps for AIR BURTS (30 pcs)
1 x Smoke set "Glider"
1 x Red smoke canister 100 g
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x PCARD Wireless System
1 x Ventral support for AX-18/AX-60
1 x Parachute expulsion foam
1 x White smoke canister 100 g
1 x "S" set for boats
1 x White smoke bombs AX-60 (5 pcs)
1 x Red smoke bombs AX-60 (5 pcs)
1 x "M" set
1 x White smoke bombs AX-3 (10 pcs)
1 x "S" set for planes
1 x AX-60 starters (5 pcs)
1 x Green smoke canister 100 g
1 x Initior Receiver FRX2 Wireless
1 x AX-60 starters (5 pcs)
2 x Digital precision scale up to 2000 g
1 x Copier 2x20 cm pcs
2 x Digital scale up to 40 kg
2 x Ball Link Plier
1 x Hot Glue Stick BLACK
2 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
2 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x 2,5x60 mm allen screwdriver
1 x Screwdriver for Hexagon 1,27mm
1 x Z Bender - S Type Tool
1 x Disposable Injector Bags (30x16cm) 100 pcs
2 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
2 x Hexagonal ball head 2.0 x 50 mm
3 x Vacuum pump P1-N
2 x Crimping tool
1 x Starter EM Gear Power 250
2 x Ball Link Plier
1 x Hot Glue Stick RED
1 x 
2 x Starter 12v (Max 90 and 15ccm)
2 x Z Bender - S Type Tool
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
2 x Dust collector for mould cleaning
1 x GameCommander USB Universal
1 x SIMtransmitter 6 Mode 2
1 x Slave-cable USB Easy Sim
1 x Big-Malibu XL Roof box with surfboard rack GREY
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x Profile ABS half cane 2.0x1000 mm
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x 1,2x1000 mm 2:1 black termoretract tube
1 x CC 05
1 x Fresa corte diamante Ø 2.35mm (lentil)
1 x Crystal Universal RX 35.040 Ch 64
1 x Dremel 3000 130W
1 x Parachutist
2 x Fresa corte diamante Ø 2.3mm (bola)
1 x Rubber Insert soft, 1 Pcs.
1 x PROXXON - SAW BLADE 8MM 0ZI220E
2 x Screwdriver for Torx® TX8
1 x Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
2 x Starter 12v (Max 180 and 30ccm)
1 x Sub-D Plug Mold
1 x Pump hose (Ø 6/8 mm) transparent
3 x Screwdriver for Hexagon 1,5mm
1 x Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
2 x PROXXON - SAW BLADE (50MM - 20T) (28017)
1 x Propeller diller for DLE111 and DA85-150
1 x Mini Infrared Thermomiter
1 x Propeller diller 5/6,3/8/9
1 x Support conector MPX (6 pcs)
1 x MPX 8 pins plug mold
1 x Heli digital angle measurer
2 x Heli blades angle measurer
1 x Blades 330mm
1 x Telemetry interface ALTIS 12 cm
1 x Hot Glue Stick GREEN
2 x 
1 x Black smoke bombs AX-60 (5 pcs)
1 x Yellow smoke bombs AX-60 (5 pcs)
1 x Motor A2212/13T
1 x Extractor piñones 2.3/3.2 mm
1 x TWIST planeador gomas
1 x PIT (Aero-Naut)
1 x Altimeter Altis NAO
1 x Motor brushless 1806 - 2300 Kv Cuadracopter
1 x POWER PEAK D7 EQ-BID 12V/230V-Duo Charger
1 x Motor A200-6
1 x Motor A10-7 L 4,4:1
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Starter Sullivan-STAR 603 DINATRON
1 x 55% silver electrodes (2 pcs)
1 x Sealing Iron Sleeve STD
1 x Fresa corte diamante Ø 2.35mm (flame)
1 x Handle for PERMAGRIT lime
1 x Transmitter Crystal 35 Mc/s Ch 77
1 x Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x Axi for motor A40-L Motor 8-Pole-Electric Turbine
1 x Motor A40-10 L V2 14-Pole Glider
1 x Motor A40-10S V4 14-Pole
1 x Motor A30-12 XL Glider
1 x Axle for motor A20-S (3 uds)
1 x Motor A60-5XS V4 28-pole kv420
1 x Axle for motor A30-XL V2
1 x A40-10S V2 8-Pole + 6,7:1 PG
1 x Motor A50-10L Turnado V3 Glider
1 x Motor B40-10 L
1 x Backmountset complete A40
1 x Motor A30-12 L V4
1 x Motor A20-6 XL 10-Pole EVO + 4,4:1
1 x Motor A20-20 L EVO
1 x Motor A60-6XS V4 28-pole kv370
1 x Motor A50-14 L 8-Polos Electric turbine
1 x Motor A50-16 S V4
1 x Motor A30-10 XL V4
1 x Motor B40 10L + MAXON 4,4:1 Keramik
1 x Motor A30-14 L V4
1 x Shaft for A60-XS-V2 (112,5mm)
1 x Motor A50-12 L V4
1 x Motor B20-10 L + 4:1 gearbox
1 x Motor A50-14L Turnado V3 Glider
1 x Screwdriver for Torx® TX6
1 x SKY RC Temperature Sensor
1 x Charger SKY RC e680
1 x Adaptadores carga 6s JST-XH
1 x Crimping tool
1 x 1,5x50 mm allen screwdriver
1 x Motor HP 220/30/A3 P4 5:1
1 x Vacuum pump 12 CFM
1 x Charger SKY RC D200 neo
1 x Copier 5x20 cm pcs
1 x Motor Advance 30-10 F3A
1 x Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x Goma arrancador Ø36 mm x 30 mm
1 x Concave-Convex sandpaper file 13 mm
1 x Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs
1 x PROXXON - SAW BLADE DIAMOND OZI/E
1 x 22 mm Cut Disc Proxxon/Dremmel
1 x Mini Lock Grips 2PCS
1 x PERMAGRIT Sanding Block 45° 140x51 mm
1 x Tube bender
1 x Universal Filter
1 x Latex Gloves GRIP, size L, box/ 100 pcs
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Propeller 3x2
1 x DC Small for MultiLog & UltraLight
13,510.48EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies