Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

P-47 Thunderbird Deco 01
3,990.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Xplorer2 anemometro
2 x	Xplorer3 anemometro
2 x	Xplorer4 anemometro
1 x	Xplorer1 anemometro
3 x	GameCommander USB Universal
1 x	DUPLEX 2.4EX Central Box 210
1 x	Propeller POWER-PROP 13x9 Izda
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	LASER 73" 1.85m (05) PILOT
1 x	FALCON 20X9 CARBON PROPELLER (GAS)
1 x	Cut tube
1 x
1 x	3,0x60 mm allen screwdriver
1 x	Conector JR Servo male (50 pcs)
1 x	Bungee HLG Premium
1 x	Screw-lock connector M2 (2 uds)
1 x	Steering arm 16 mm Ø 4 mm
1 x	30 cm BEC cable (female)
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	BALSA triangular 8x8x1000 mm
2 x	BALSA trip 2.0x2.0x1000 mm
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Tail support (2 pcs)
1 x	Blade holder center
1 x	Blade Holder Full (3 blades)
1 x	Rotor Mast
1 x	Motor wall
1 x	Bearing 3x6x2,5
1 x	Blade Holder (3 blades)
1 x	Blades 330mm
1 x	4 blades set
1 x	Head core bushing
1 x	LA500 pre-rotation gear hub
1 x	LA500 housing-upper cyclic
1 x	LA500 ciclic lever
1 x	LA500 cyclic central part
1 x	LA500 pre-rotation gear
2 x	Kavan Car 25% nitro 1l
1 x	Fuel bottle 500 ccm
1 x	Medium pin type hinge (12 uds)
1 x	Hot Glue Stick BLACK
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Aluminium servo arm (2 uds)
1 x	Dust collector for mould cleaning
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	MPX-Dean "T" Adapter
2 x	Battery charging cable XT60
1 x	Hot Glue Stick RED
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x	Oils Pumps Empty (1 liter)
1 x	Hot Glue Stick GREEN
1 x	Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	LOWER TOW HOOK
1 x	Oracover light Grey 2m
1 x	Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey)
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
2 x	PC-21 2.880 mm RED
2 x	FELIX SportJet Yellow 2200 mm
1 x	Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox)
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	BD-5J PNP
1 x	MIRAGE 2000 TIGER PNP
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Cabel charger transmitter GRAUPNER
3 x	VIPER SL YELLOW PNP 2270 mm
1 x	FELIX JR Red/Yellow 1750 mm
1 x	MB339 Saudi PNP
2 x	JMB-Jets K8 Trainer Jet PNP 2050 mm
1 x	PC-21 2880 mm Electric Landing Gear
2 x	BD-5J ARF+
1 x	MIRAGE 2000 Camuflage PNP
3 x	PC-21 2880 mm Spinner 5Blade red
2 x	PC-21 2880 mm Spinner 5Blade blue
2 x	FELIX SportJet Blue 2200 mm
1 x	PC-21 XXL 3.395 mm
2 x	PC-21 2.880 mm BLUE French Army Scheme
1 x	FELIX SportJet Red/Yellow 2200 mm
1 x	PC-21 2880 mm Propeller 5 blade 20x10 K45TP Scale composite
1 x	Electric Landing Gear FELIX SporJet 2.200mm
1 x	MB339 CANADA PNP 1790 mm
1 x	Boeing (TX) T-7A RED HAWK
1 x	FELIX JR Yellow/Black 1750 mm
2 x	MIRAGE 2000 RED/BLACK PNP
1 x	MB339 CAMUFLAGE PNP 1790 mm
1 x	LA500 nose
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	SPARK Switch 7.4v
1 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	Cabling for Fox MDM1 wings
1 x	SPARK Switch 12v
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	Male connector for 6 pines AWG
1 x	70 mm INO spinner (carbon imitation)
1 x	Aluminum Fold Prop Spinner 50 mm / 6mm
1 x	Aluminum Fold Prop Spinner 30 mm / 3.17 mm
1 x	Aluminum Fold Prop Spinner 30 mm / 5.0 mm
1 x	Spinner Alumin. fixed propeller 45 mm / 3,2 mm
1 x	Spinner INO 51 mm Chrome (Imitacion metal)
1 x	Spinner INOVA 102 mm Black
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Avia spare fouselage CF reinforced (Top Model)
1 x	Lead with adhesive (2 pcs)
1 x
1 x	Tip wing protector 30x10 (2 pcs)
1 x	MR30 connector male
1 x	Astra wing Joinner (Top Model)
1 x	Extension 7.5 cm
1 x	Bidule 55 2460 mm Cabina
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Bidule 111 3000 mm Canopy
1 x	13 mm wing servo holder
1 x	Pilot LA 500
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Hacker X-Pro USB interface V2
1 x	Female connector JST SH 1.0mm with 10 cm wire
1 x	SPS Remote switch actuator
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	Short Switch On/Off micro
1 x	Double conector with JR adapter and 200 mm extension
1 x	PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x	Spinner Alumin. fixed propeller 50 mm / 4,0 mm
1 x	F3A carbon 95 mm spinner
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x	Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x	Spinner 104x131 mm 115 g CFK-BS
1 x	82 mm INO spinner (carbon imitation)
1 x	63 mm INO spinner (carbon imitation)
1 x	Spinner Alumin. fixed propeller 50 mm / 5,0 mm
1 x	89 mm INO spinner (carbon imitation)
1 x	Spinner INO 89 mm Chrome (Imitacion metal)
1 x	Aluminum Fold Prop Spinner 38 mm / 5 mm
1 x	Spinner INO 82 mm Chrome (Imitacion metal)
1 x	51 mm INO spinner (carbon imitation)
1 x	Spinner INO 75 mm Chrome (Imitacion metal)
1 x	Aluminum Fold Prop Spinner 40 mm / 5mm
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL
1 x	Spinner Alumin. fixed propeller 50 mm / 6,0 mm
1 x	Tip wing protector 28x10x12 (2 pcs)
1 x	Albatros red/white (Top Model)
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Avia (Top Model)
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	ARTIST 1.560 mm
1 x	Horn 20x28,5 mm (2 pcs)
1 x	38x4,5 mm wires output (2 pcs)
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	7 mm gas motor standoff
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	30 mm Alu spinner 3 mm pleg. propeller
1 x	18 mm wing servo holder
1 x	57 mm micro-mini servo cover
1 x	ACTIVE ARF Electric 1.995 mm
1 x	Albatros ,spare cockpit (Top Model)
1 x	Bidule 170 ARF 3.48 m
1 x	BRASS CONTROL HORN M3x16 mm 2pcs
1 x	20 mm tail wheel for 0,5-1 Kg models
1 x
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Bidule 111 3000 mm
1 x	58 mm micro servo cover
1 x	Angle of incidence meter
1 x	65 mm mini servo cover
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x	BULLIT Wing 1095 mm
1 x	28x5 mm wires output (2 pcs)
1 x	Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair
1 x	Angle measurer
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	50x45 mm micro-mini servo cover
1 x	34 mm Alu spinner 3.17 mm pleg. propeller
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Adjustable launching hook
1 x	41x5,5 mm wires output (2 pcs)
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	11 mm wing servo holder
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	90x60 mm standart servo cover
1 x	Astra (Top Model)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	MR30 connector female
1 x	Avia spare blue cockpit (Top Model)
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	PC-21 XXL 3.395 mm
1 x	MB339 Freece PNP 1790 mm
1 x	VIPER SL NAVY PNP 2270 mm
1 x	Charger ISDT 608AC 200W
1 x	Boeing (TX) T-7A Camo
1 x	SCHOCKJET ARF 2.050 mm

94,491.66EUR