4.50EUR

CA Glue fast 20g
[R1501032]


CA Glue fast 20g
Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
TYGON tubo 1 m Diam. 3.4 x 2.0  mm
TYGON tubo 1 m Diam. 3.4 x 2.0 mm

temporarily out of stock
temporarily out of stock

Tygon tube 6.35 - 3.18 mm 1m
Tygon tube 6.35 - 3.18 mm 1m

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 23x8
Propeller MENZ-S 23x8

temporarily out of stock
temporarily out of stock

Sparkplug NGK CM6
Sparkplug NGK CM6

temporarily out of stock
temporarily out of stock

XT-60  connector (male)
XT-60 connector (male)

temporarily out of stock
temporarily out of stock

Cyano SUPER - GOLD™ THIN (12g)
Cyano SUPER - GOLD™ THIN (12g)

temporarily out of stock
temporarily out of stock

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Locking cable tie 4.6x203 (uds)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Canopy Latch
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Cabin latch Fox MDM1 4m (pair)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Steering arm 12 mm Ø 4 mm
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Screw-lock connector M2 (2 uds)
1 x Locking cable tie 3.2x142 (uds)
2 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Locking cable tie 2.5x100 (uds)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Electric spoiler 250 mm (2 pcs)
1 x Covered closure or fairings
1 x Pilot "Adolf" Legends Series (Slimline)
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x Brass rod Ø 1.5 mm x 1000 mm
2 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x 1/10 Pilot "Jimmy"
1 x 1/12 Pilot "Langley"
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
2 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x 2 LiPo XH>EH adapter
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Pilot JAN 1/4 Saiplanes
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x USB HLS prog. interface
2 x CC 01
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x 1/12 Pilot "Cougar"
2 x Cabel charger transmitter GRAUPNER
1 x Starter 12v (Max 90 and 15ccm)
1 x Hot Glue Stick RED
2 x Aro pasacable Ø25 mm (4 pcs)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Oil FUCHS 1 liter
1 x Squared carbon wing joinner 5x5x220 mm
1 x Hot Glue Stick GREEN
1 x Xplorer2 anemometro
1 x Ball Link Plier
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x Bateria LRP 2200-7.2v 6 cell NiMH
1 x Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Aceite DELUXE turbine Jet Oil 1 litro
1 x BALSA trip 10x10x1000 mm
1 x MAX pilot ARTF
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Large flex hinge (12 uds)
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x 41x5,5 mm wires output (2 pcs)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x DPSI magnetic switch actuator (housing)
1 x Opto Gas Engine Kill Switch
1 x Extension 2/3 lipos JST - JST/C
1 x PSC 5
1 x MAX BEC 2D plus EX
1 x Prolonguer for Balancer Thunder Power 6S
2 x SBEC 40
1 x Pins M connect Multipin connectors AWG 20-24
1 x Opto Gas Engine Kill Switch
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x Epoxy Resin L (2.5 Kg)
1 x Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
1 x Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x resin-hardener L-385 H-385 (625 g)
1 x A/C quality beech plywood 600x300x0.8 mm
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x Carbon plate 550x350x1.0 mm ECOTECH
1 x CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
1 x 82 mm aluminium spinner.
1 x 82 mm INO spinner (carbon imitation)
1 x CC 02
1 x Aluminum Fold Prop Spinner 30 mm / 3.17 mm
1 x 90x45 mm hard foam KOVO wheel
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Conector XT-150 6mm (Set: 5 pares)
1 x 95 mm aluminium spinner.
1 x resin-hardener package L-385 with hardener H-385 (875 g)
1 x Metal ring front FEMA
1 x Landing gear strap small (4 uds)
1 x 100 mm rods set for direction control
1 x Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x 45 mm rods set for direction control
1 x Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs)
1 x Fully Threaded Steel Rod M3
1 x Pushrod octagone 4/3
1 x Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs)
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Aluminium servo arm (2 uds)
1 x Carbon plate 550x350x3.0 mm ECOTECH
1 x Cargador para AA/AAA Ni-MH & Ni-Cd
1 x 89 mm INO spinner (carbon imitation)
1 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x Adapter lead MPX/EC3
1 x Carbon plate 350x150x1.0 mm
1 x Carbon plate 350x150x2.5 mm
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x 89 mm aluminium spinner.
1 x 76x24 mm (3.0") Type jets aluminium core wheel
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm)
1 x Charger SKY RC D200 neo
1 x Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm)
1 x Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm)
1 x Horn 16,5x20 mm (2 pcs)
1 x 20x200 mm battery rings
1 x Tray for FUTABA 18 SZ
1 x Tygon tube 6.35 x 3.18 mm 15 m
1 x Tubo Teflon Ø25 mm x 10cm
1 x Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs)
1 x Vest clothes Hispano Aviación
1 x Spinner INOVA 45 mm White
1 x 75 mm INO spinner (carbon imitation)
1 x Short extra-strong control horn with bearing 2,8x15
1 x 45 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x Hardener Aero EPH 161 (500 g)
1 x Male Prolonger TP 4/5S
1 x Racor 4/4 mm
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Racor "Y" 3 mm
1 x Wheel collar 5 mm Ø (4 uds)
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Nylon threaded block M6 (2 uds)
1 x Circlick securite
1 x CC 05
1 x Connector CAN 15
1 x Pendulun "luxe" to tank
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Multi-adapter balancer JST - TP
1 x 70 mm INO spinner (carbon imitation)
3,944.80EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies