Top » Catalog » Hardware » Servos » Hitec » ROIHS7954SH

109.00EUR

Servo HITEC HS-7954 SH Digital High
[ROIHS7954SH]

The HS-7954SH could be considered the most economical high voltage, high torque, coreless servo on the market. Based on the ultra popular HS-7955TG, the HS-7954SH has the added benefit of our high voltage coreless motor. With 403 inch ounce of torque at 7.4 volts, the HS-7954SH is fast too with a 0.12 second transit time when operating on a 2 cell LiPo pack. The HS-7954SH harnesses all this power by utilizing a heavy duty case that incorporates an aluminum heat sink, hardened steel gears, and two strong steel gear pins nested in brass axial bushings. Put it all together and you get one tough high voltage servo at a price that can't be beat.

Features:
• G2 Digital Circuit
• Steel Gear Train
• Ultra Performance HV Coreless Motor
• Heatsink Case
• Dual Ball Bearing Supported Output Shaft

Programmable Features:
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points
- Neutral Points
- Fail Safe On/Off
- Fail Safe Point
- Resolution* (default is high resolution)
- Overload Protection* (default is off)
*These features are only programmable with the HFP-20 programmer.

Detailed Specifications:
- Motor Type: Coreless
- Bearing:Dual Ball Bearing
- Speed: 0,15 - 0,12 sec @ 60deg.
- Torque: (6v-7.4v) 333-403 oz/inch; 24-29 kg/cm
- Size: 39,88x19,81x36,83 mm (1,57x0,78x1,45 inch.)
- Weight: 65.20 g (2.30 oz)

temporarily out of stock

Reviews

Customers who bought this product also purchased

Conector JR/Uni Servo female BLUE silicon (10 pcs) temporarily out of stock	Ball link M3 RPA's-UAV's temporarily out of stock	DUPLEX R18 EX 2,4GHz + Rsat2 temporarily out of stock
Servo Mount M (blue) temporarily out of stock	Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) temporarily out of stock	Servo HITEC D951 TW temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Turbina XICOY X240 compact
3,385.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ABS tube 3.0x2.0x330 mm
2 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
2 x	ABS tube 9.0x8.0x1000 mm
1 x	ABS tube 7.0x5.0x1000 mm
1 x	ABS tube 16.0x14.0x1000 mm
2 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
2 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	ABS tube 3.0x1.0x1000 mm
2 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	ABS tube 12.0x10.0x1000 mm
1 x	ABS tube 4.0x2.0x1000 mm
1 x	ABS tube 14.0x10.0x1000 mm
1 x	ABS tube 5.0x4.0x1000 mm
1 x	ABS tube 10.0x8.0x1000 mm
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	ABS tube 18.0x16.0x1000 mm
1 x	ABS tube 6.0x4.0x1000 mm
1 x	ABS tube 4.0x3.0x1000 mm
1 x	ABS tube 5.0x3.0x1000 mm
1 x	ABS tube 8.0x7.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	ABS tube 6.0x5.0x1000 mm
1 x	ABS tube 3.0x2.0x1000 mm
2 x	Pine wood slat 3.0x7.0x1000 mm
2 x	Beech dowels 2.0 x 1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
3 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
3 x	Pine wood slat 3.0x10.0x1000 mm
2 x	Pine wood slat 6.0x6.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
3 x	Spikes Band (5 m)
2 x	SE Ring 240 mm (2 pcs)
1 x	SE Ring 450 mm (2 pcs)
2 x	Ring 320 mm length (5 pcs)
1 x	SE Ring 250 mm (2 pcs)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x	Tape GFK 25 mm
1 x	SE Ring 400 mm (2 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	20x1000 mm Ring Strap Back To Back
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	SE Ring 480 mm (2 pcs)
1 x	SE Ring 300 mm (2 pcs)
1 x	Marker ties (20 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Tape GFK 50 mm
1 x	SE Ring 360 mm (2 pcs)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	Locking cable tie 3.2x142 (uds)
1 x	CM-3
1 x	ABS tube 2.0x1.0x1000 mm
1 x	Support conector MPX (6 pcs)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	25 mm carbon servo arm
1 x	1/10 Pilot "Jack"
1 x	1/12 Pilot "Langley"
1 x	160 mm carbon undercarriage (2pcs)
1 x	102 mm INO spinner (carbon imitation)
1 x
1 x	152x46 Ø6.0 mm aluminium core wheel
1 x	Balsa panel 4.0x100x1000 mm
3 x	BALSA trip 10x10x1000 mm
2 x	BALSA trip 6.0x6.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
3 x	Beech dowels 4.0 x 1000 mm
1 x	BALSA triangular 6x6x1000 mm
2 x	TX 250 mW especial GOPRO
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
2 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
2 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Landing lights 18 mm (0.71in)
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	TAKEO 3.6m electric
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Ball Link Plier
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Digital precision scale up to 2000 g
1 x
1 x	Screwdriver for Torx® TX6
2 x	Round Rod 5,0x1000 mm
2 x	ABS Strip 1.5x6.0x1000 mm
2 x	Strip 1,5x1,5x330 mm
2 x	ABS I Strip 20x10x1000 mm
2 x	ABS Strip 1.0x2.0x1000 mm
1 x	Red aluminium servo arm V1-Futaba 1,5" inch M3
1 x	Blue aluminium servo arm V1-Hitec 1,0" inch M2
1 x	Blue aluminium servo arm V3-Hitec 1,25inch M3
1 x	Red aluminium servo arm V2-Futaba 1,0" inch M3
1 x	Blue aluminium servo arm V1-Hitec 1,25" inch M3
1 x	Red aluminium double servo arm FUTABA 2,5inch M3
1 x	POLARON EX 800w charger
1 x	Spinner fixed propeller 60 mm / 5,0 mm
1 x	Canopy Latch
1 x	Foam plastic plates (310x210x2 mm)
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	Ciano KAVAN Thin 20g
1 x	Pin hinge 26x11 mm (10 uds)
1 x
1 x	KAVAN CA Activator 150ml
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Ciano KAVAN Super Thin 20g
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm)
1 x	Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	PHASOR RACE 2035/2100 2D
1 x	ABS angle 2,0x2,0x1000 mm
1 x	PHASOR RACE 2035/4100 1D
1 x	Glow starter with charger 230v
1 x	Kavan Car 25% nitro 1l
1 x	Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x	Glow Plug Clip 1.3 Ah
1 x	Combustible Glow "KAVAN" air/heli 15% nitro
1 x	Combustible Glow "KAVAN" air/heli 10% nitro
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Spinner 40 mm Black (Kavan)
1 x	Ciano KAVAN Medium 20g
1 x	Electric Fuel Pump 12v
1 x	Ciano KAVAN Thick 20g
1 x	XT60 Connector with Holder Male 2pcs
1 x	Engine mounts for .09 - .19 engine
1 x	Battery LiPo GRE18 600 mAh 7.4v
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x	Adaptadores carga 6s JST-XH
1 x	BETA 1400 RTF Red
1 x	Conector MT-60 (pair)
1 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm)
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x	CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
1 x	Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
1 x	Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Press fitting for 1,0 diam. steel cable (10 pcs)
1 x	20 mm gas motor standoff
1 x	Turbina XICOY X180 compact
1 x	Turbina X45 H "Light Version"
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Aluminium ignition bad (blue)
1 x	35 mm gas motor standoff
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
2 x	Beech dowels 3.0 x 1000 mm
1 x	Birch plywood plate 600x300x1.2 mm
1 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
2 x	Birch plywood plate 600x300x4.0 mm
1 x	Micro Tarjeta SD Rapid Rush 16 GB
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Grafas ARF 3.0 m (Top Model)
1 x	Q-12 2000 mm Electric
1 x	Gracia Maxi ARF, spare wings (Top Model)
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	Gracia Maxi ARF, bags (Top Model)
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Gold aluminium servo arm V2-JR 1,5" inch M3
1 x	Blue aluminium double servo arm V3-Hitec 3,5inch
1 x	Blue aluminium servo arm V2-Hitec 1,0 inch M3
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
2 x	SE Ring 330 mm (4 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Cable video GoPro and 5V cable
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	ABS angle 6,0x6,0x1000 mm
1 x	Gracia (Top Model)
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Round Rod 3,0x1000 mm
1 x	Round Rod 1,5x1000 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Round Rod 2,0x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	Strip 3,5x1,75x330 mm
1 x	Strip 2,0x2,0x330 mm
1 x	Round Rod 1,25x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm

12,065.56EUR