Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

VSpeak ECU converter KingTech
79.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Extractor piñones 2.3/3.2 mm
2 x	Para-RC Trike "RC-Bullix"
2 x	Set cintas unión paracaídas 145 cm
1 x	Windsock Ozone L -1200 mm
1 x	Parachute BACKUP X100
1 x	Wing OXY 5,0 m2
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Para-RC "RC-Evo-Cross" Rescue
2 x	Parachute PV6 for F3J
4 x	Ballast 700gr OPALE
1 x	Opale Rucksack
2 x	Bungee HLG Premium
1 x	Optical RPM Sensor
1 x	Glases Stratus
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Glases Moritz
2 x	Cabling for Fox MDM1 wings
1 x	Balsa panel 8.0x100x1000 mm
1 x	CC 05
2 x	A/C quality beech plywood 600x300x1.5 mm
1 x	DPSI Ampere battery backer
1 x	Adapter lead MPX/XT60
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	CC 02
1 x	Double conector with JR adapter and 200 mm extension
1 x	Balsa panel 1.0x100x1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Balsa panel 4.0x100x1000 mm
3 x	Balsa panel 10x100x1000 mm
1 x	Dean "T" - Futaba Adapter
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	BALSA triangular 8x8x1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
2 x	A/C quality beech plywood 600x300x8.0 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	CM-3
1 x	A/C quality beech plywood 600x300x5.0 mm
2 x	Balsa panel 2.5x100x1000 mm
1 x	Circlick securite
2 x	4 LiPo XH>EH adapter
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	BEC 3A FOXY
1 x	Cabel charger transmitter GRAUPNER
2 x	30 cm BEC cable (female)
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	CC 03
1 x	Connector CAN 15
1 x	SE Ring 330 mm (4 pcs)
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	Oracover Azul 2 m
1 x	Hovercraft sailcloth
1 x	Conector XT-150 6mm (Set: 5 pares)
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Initior Receiver FRX2 Wireless
2 x	LUCAS pilot ARTF
2 x	Paramotor BackPack XXS 2
2 x	Wing OXY 0,5 pulgadas2
1 x	Rescue 1,8m2 / BackPack
2 x	3,0x60 mm allen screwdriver
1 x	Windsock Ozone L - 700 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Interruptor RX/Batterie
1 x	SPARK Switch 12v
1 x	30 cm BEC cable (male)
2 x	Birch plywood plate 600x300x4.0 mm
1 x	Trike XL motor set (motor+esc+prop)
1 x	Hot Glue Stick BLACK
1 x	Vacuum pump 12 CFM
1 x
1 x	Starter Sullivan-STAR 601
2 x	Hot Glue Stick GREEN
2 x	MAX BEC
1 x	Digital precision scale up to 2000 g
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	Screwdriver for Hexagon 1,5mm
1 x	2,0x50 mm allen screwdriver
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Glases Aspen
2 x	Interruptor SPS 70v 60/120A
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	wing/fuselage connector for 3 pines AWG 20-24
2 x	Lite Plywood panel 600x300x3.0 mm
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
2 x	Interruptor SAFET-SWITCH 12HV Twinbatt
2 x	PSC 6
2 x	3 LiPo XH>EH adapter
2 x	USB interface ALTIS
1 x	Beech dowels 4.0 x 1000 mm
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Birch plywood plate 600x300x1.2 mm
1 x	Birch plywood plate 600x300x2.5 mm
2 x	SPS 70V 100/200 A
1 x	Birch plywood plate 600x300x1.5 mm
1 x	Birch plywood plate 600x300x2.0 mm
2 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Female connector for 12 pines AWG
1 x	Blades 330mm
1 x	Aramid 50 daN 50 m
1 x	Parachute P4
2 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x	VM 2020/20 rear
1 x	KIRA 600-16
1 x	Sealing Iron Sleeve PROF
1 x	Propeller POWER-PROP 10x6
1 x	Propeller POWER-PROP 10x7 Izda
1 x	Fabric scissors curved Premium, 16 cm / 6" length
1 x	MPX 8 pins plug mold
1 x	Pump hose (Ø 6/8 mm) transparent
1 x	Modelling compound (Plastilin), sculptor's quality 1 Kg
1 x	Soldering tip for KAVAN soldering iron KAV66.8338
1 x	100g Flux Paste for Silver Solder
1 x	Mold plugs XT-30
1 x	Propeller APC 10x3,8 SF
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Aluminium ignition bad (blue)
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	KONDOR 15-92
1 x	VM 2014/27 rear
1 x	AXI 2814/16 V2
1 x	KIRA 600-17
1 x	PYRO 650-53L EJE LARGO
1 x	3.17 mm Prop Adapter CN-Spinner
2 x	Mini-handed clamp
1 x	AXI 2814/20 V2 Long
1 x	25 mm Sandpaper file
1 x	AXI 2820/10 V2
1 x	KIRA 600-22 6,7:1
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x	Propeller electric carbon 10.5x6
1 x	Propeller electric carbon 6x5
1 x	Propeller 8x4 Electric
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Propeller POWER-PROP 14x8
1 x	Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x	Propeller 8x4,3 SlowFlyer
1 x	Digital weight, angle and balance meter BASIC
1 x	Spare round blades, 28 mm, pack/ 2 pcs.
1 x	Mold plugs XT-90
1 x	Smart Soldering Iron 110W/230V AC
1 x	MPX plug mold V1
1 x	Schul-Malpinsel Gr.5
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Sealing Iron Profi LCD
1 x	silverlot 45% - 1,50x500 mm solder rods (2 pcs)
1 x	Aramid fibre shears Proton®, 21 cm / 8" length
1 x	Tachometer HANGAR 9 digital
1 x	Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x	Mini Infrared Thermomiter
1 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
1 x	EC-Cutter
1 x	Tachometer Hyperion Multi-pala
1 x	Propeller diller 5/6,3/8/9
1 x	Welder 100W/200V
1 x	Roller cutter 28 mm
1 x	Propeller diller for DLE111 and DA85-150
1 x	Pistola termica MH 550 micro
1 x	XT-60 Plug Mold
1 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	Laminating brush 10 mm, pack/ 50 pcs
1 x	Dean-T Plug Mold
1 x	Steel brush wheel with 2.35mm
1 x	Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Propeller diller for DLE170
1 x	Propeller diller for DA50, DLE55 red
1 x	PT 21x13 EL Propeller 3 Blade
1 x	PT 16x10 E Propeller
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	10 mm gas motor standoff
1 x	15 mm gas motor standoff
1 x	Propeller APC 10x7 Electric
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
2 x	Prolonguer for Balancer Thunder Power 6S
2 x	Extension 2/3 lipos JST - JST/C
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	UBEC 6A KAVAN
1 x	Opto Gas Engine Kill Switch
1 x	Extension 2/3 lipos JST/C
1 x	Extension 5 lipos JST - JST/C
1 x	MAX BEC 2D plus EX
1 x	PSC 5
1 x	SBEC Jeti
1 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	SBEC 40
1 x	SPS Remote switch actuator
1 x	Extension 5 lipos JST/C
1 x	Male Prolonger TP 4/5S
1 x	SBEC 30 D
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	SWTU2 switch
1 x	Multi-adapter balancer JST/C - TP
1 x	Switching module high voltage SXH
1 x	Pins M connect Multipin connectors AWG 20-24
1 x	Magnetic Interruptor MULTIPLEX
1 x	PowerBox SparkSwitch RS
1 x	Extension 6 lipos XH > EH
1 x	Multi-adapter balancer JST - TP

11,489.32EUR