1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Hélice POWER-PROP 14x9 Izda
1 x SkyMaxx 1.550 mm (kit)
1 x Rafale C (Aero-naut)
1 x Carro remolque para veleros 720 x 285 mm
1 x DINAMOETRO S-1580
1 x Varilla latón hexagonal Ø 4 mm x 1000 mm
1 x Actuador lineal HLS12-100210-7.4v
1 x Modulo PPM Encoder
1 x Piloto "Dick" Legends Series(Slimline)
1 x Varilla latón Ø 1,0 mm x 1000 mm
2 x Gancho de remolque + 4,5 m
2 x Varilla acero Ø 1,2 mm x 1500 mm
1 x Bisagra de nylon 20x20x0,3 (10 pcs)
1 x Piloto 1/12 "Fighter"
1 x Piloto militar "Kamikaze" tamaño 9cm (Slimline)
1 x Piloto WWII US Navy Pacific 12" Sclae 1/6-1/5
1 x Piloto 1/6 "Tony"
1 x Varilla acero Ø 6,0 mm x 1000 mm
1 x Piloto 1/12 "Tom"
1 x PIX Hawk con accesorios
2 x Varilla latón hexagonal Ø 5 mm x 1000 mm
1 x Disolvente barniz tensor 500 ml
1 x Instrumentos individuales 1/4 Planeador
1 x Cera desmoldeante 650 g
2 x Camara 800 TVL CMOS para FPV
1 x Gancho de remolque hasta 3m
1 x Varilla acero Ø 8,0 mm x 1000 mm
1 x Bisagra larga con pin metalico (6 uds)
1 x Bisagra cilíndrica 3,0 Ø x 10 x 48 mm (10 pcs)
1 x Medidor ángulos
1 x Piloto "Goose" (Slimline)
1 x Bisagra de nylon flaps/compuertas 27x10,5 (2 pcs)
1 x Bancada servo gancho
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x Tapaporos 1000 ml (DOPE)
1 x Piloto Jet "Red" 1/6 Scale
1 x Disolvente Plasti Dip 1000 ml
1 x Varilla Aluminio Ø 4,0 mm x 3000 mm
1 x Piloto civil "Gramps" tamaño 9cm (Slimline)
1 x Bisagra 15 mm reforzada
1 x Rueda KOVO SLH 120x60 mm
1 x Bisagra de aluminio tipo PIN 6x98 mm (2 pcs)
2 x Bisagra 25 mm reforzada
1 x Varilla acero Ø 2,5 mm x 1000 mm
1 x Piloto 1/6 "Cindy"
1 x Piloto civil "G-Man" tamaño 9cm (Slimline)
1 x Piloto 1/10 "Jimmy"
2 x Gancho de remolcador
1 x Bisagra cilíndrica 2,5 Ø x 8 x 33 mm (10 pcs)
1 x Plasti Dip Liquid Tape 429 ml rojo
1 x Bisagra cilíndrica 2,5 Ø x 10 x 43 mm (10 pcs)
1 x Tubo espiral FESTO 6x1 Black
1 x Varilla carbono 0.8 mmx1000 mm
1 x Varilla carbono plana 3.0 x 1.0 x 1000 mm
1 x Bayoneta de carbono 13,4 mm Ø 0,48 mm
2 x Varilla carbono 0.5 mmx1000 mm
1 x Varilla carbono 2.0 mmx1000 mm
1 x Varilla carbono 20 mmx1000 mm
1 x Set motorización CHALLENGER Indoor
2 x de Havilland Vampire (Rc Factory)
1 x Me-163
1 x Cono plástico blanco hélice fija 40 mm diámetro
1 x Barniz Tensor 1000 ml
1 x Relleno balsa HobbyLite
1 x Hélice POWER-PROP 7x7
1 x Adaptador MPX-EC3 10cm
1 x Conexion PREMIUM fuselaje/alas para 3 servos SUB-D 160 cm
1 x Cono plástico blanco hélice fija 42 mm diámetro
1 x Camara USB micro endoscopica
1 x Plancha aluminio 500x250x0.5 mm
1 x Varilla latón Ø 0,5 mm x 1000 mm
1 x Varilla acero Ø 0,8 mm x 1000 mm
1 x Varilla latón hexagonal Ø 3 mm x 1000 mm
1 x Bisagra Redonda flexible (12 uds)
1 x Conector JAPAN G2 Set 5 pares
1 x Bisagra Robart flaps/compuertas metal (2 pcs)
1 x Cierre cabina
1 x Cono plástico negro hélice fija 45 mm diámetro
1 x Extensión escape motor OS 120 AX
1 x Cono plástico negro hélice fija 42 mm diámetro
1 x Eje ruedas Ø 4 mm (2 uds)
1 x Eje ruedas 4x21 mm (2 uds)
1 x Varilla acero Ø 1,0 mm x 1000 mm
1 x Bisagra pin 39x20 mm (10 uds)
1 x Eje ruedas Ø 8 mm (2 uds)
1 x Sensor digital Air Speed con Pitot
1 x Tubo Pitot para PIXHAWK
1 x Bisagra 18 mm reforzada
1 x Rueda FEMA 140 mm / 6 mm
1 x Rueda de cola 28 mm
1 x Rueda espuma Ø 55mm x 19 mm (2pcs) eje Ø 3.5mm
1 x Varilla latón hexagonal Ø 3.5 mm x 1000 mm
1 x Gancho de lanzamiento regulable
1 x Bomba de humo PowerBox
1 x Extension 50cm Dispaly Royal/Champion SRS
1 x EXTRA 300L 1,2 m EPP Azul
3,567.21EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas