1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x BALSA trip 3.0x3.0x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
3 x Pine wood slat 6.0x6.0x1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x Walnut wood slat 2.0x2.0x1000 mm
3 x Pine wood slat 3.0x7.0x1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x Walnut wood slat 1.5x1.5x1000 mm
2 x Liston HAYA 3 x 10 x 1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x 2,3 mm Prop Adapter M5
1 x 2 mm Prop Adapter M5
1 x 4 mm Prop Adapter M6
1 x Ventus 1:4 set of instruments
1 x Motor A2212/13T
1 x Paint gun for sprays
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Tape GFK 38 mm
1 x Truck-trailer for gliders 720 x 239 mm
1 x 1/12 Pilot "Langley"
1 x 3.17 mm Prop Adapter CN-Spinner
1 x 2,3 mm Prop Adapter M6
1 x Aero-Master Fuselage (Aero-naut)
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Beech dowels 3.0 x 1000 mm
1 x 2,5x60 mm allen screwdriver
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x 45 mm rods + T patellas set for direction control
1 x DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x 45 mm rods set for direction control
1 x 140 mm rods set for direction control
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Cable tie mounts 4.3 (4 uds)
1 x Conector JR Servo female (50 pcs)
1 x Gold aluminium servo arm V2-JR 1,0" inch M3
1 x Red aluminium servo arm V1-Futaba 23 mm M2
1 x Power supply NT 25 Amp.
1 x HITEC Power Supply 30A. Max. 540w
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x 1,5x50 mm allen screwdriver
1 x Cable grommet 9.5 mm (4 uds)
1 x Ball Link Plier
1 x Crimping tool
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Dust collector for mould cleaning
1 x Digital weight, angle and balance meter BASIC
1 x Aramid fibre shears Proton®, 21 cm / 8" length
1 x Cabin latch Fox MDM1 4m (pair)
1 x Fabric scissors curved Premium, 16 cm / 6" length
1 x 100 mm rods set for direction control
1 x Digital precision scale up to 2000 g
1 x Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud)
1 x Helices DJI Mavic Air STEALTH "Black" (4x Ud)
1 x Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x Landing gear Rocket 400
1 x P 17×5.8 Prop-2PCS/PAIR
1 x FA27.2×8.9 Prop-2PCS/PAIR
1 x aluminium servo arm V1-JR 1,0 inch M2
1 x 1,2x1000 mm 2:1 red termoretract tube
1 x 2 LiPo XH>EH adapter
1 x Heli blades angle measurer
1 x 38x4,5 mm wires output (2 pcs)
1 x Cockpit plastic closing
1 x Tip wing protector 40x14 (2 pcs)
1 x Snap short M2 (10 uds)
1 x Mini-handed clamp
1 x Allen wheel collar M4x6
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Heat Seal Iron
1 x Landing gear frontal support 29x26x13,5
1 x Locking cable tie 2.5x100 (uds)
1 x Spinner NUT M8x1,25
1 x Reductora IPS 150 DX2BB-CXCS 8,6:1
1 x 3 LiPo XH>EH adapter
1 x Propeller diller for DLE170
1 x Handle for PERMAGRIT lime
1 x Allen wheel collar M4x4
1 x Hot Glue Stick BLACK
1 x Canopy Latch
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Mold plugs XT-30
1 x Cable grommet Ø 4 mm (4 uds)
1 x Pistola termica MH 550 micro
1 x Snap long M2 (10 uds)
1 x Allen wheel collar M3x3
1 x MPX plug mold V1
1 x Control for forward wheel (MINI)
1 x Kwik link unmount tool
1 x Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x PROXXON - SAW BLADE (50MM - 20T) (28017)
1 x Precision wrench L100 mm
1 x Charger GensAce IMARS Dual Channel AC200W/DC300Wx2
1 x Wing bolts M6 Steel screw Red (2 pcs)
1 x Triple rod con. 2mm Pushrod (2 pcs)
1 x Window mounting channel 5m
1 x Steering arm 16 mm Ø 3 mm
1 x Steering arm 12 mm Ø 4 mm
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Tip wing protector 28x10x12 (2 pcs)
1 x Steering arm 16 mm Ø 4 mm
2,399.22EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies