Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Turbina XICOY X195 compact
2,959.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Ferrita 14x8x5.5 mm
2 x	Ferrita con funda
2 x	Ferrita 27x14x7 mm
3 x	Ferrita 17x10x6.5 mm
1 x	Red smoke canister 100 g
2 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	Parachute expulsion foam
1 x	White smoke canister 65 g
1 x	Yellow smoke canister 140 g
1 x	Smoke set "Glider"
2 x	Initior Receiver FRX2 Wireless
2 x	"S" set for boats
1 x	Smoke set "M"
2 x	Red smoke canister 65 g
2 x	White smoke bombs AX-9 (10 pcs)
1 x	White smoke bombs AX-60 (5 pcs)
1 x	PCARD Wireless System
2 x	Blue smoke canister 100 g
2 x	Black smoke bombs AX-60 (5 pcs)
1 x	B4-0 rocket charges (6 pcs)
1 x	Yellow smoke canister 100 g
1 x	Ventral support for AX-18/AX-60
1 x	AX-60 starters (5 pcs)
1 x	3l Smoke oil
1 x	Parachutist
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	ORACOVER Fluor red (2 m)
1 x	Oracover Brown 2 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	1/12 Pilot "Tom"
1 x	SE Ring 480 mm (2 pcs)
1 x	Cinta Goldfix 1m
1 x	Circlick securite
2 x	Large flex hinge (12 uds)
1 x	Small pinned hinge (12 uds)
1 x	Micro flex hinge (12 uds)
2 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
2 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Small pinned hinge (6 uds)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Pin hinge 34x16 mm (10 uds)
2 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Medium pin type hinge (12 uds)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	ABS 500 x 400 x 1 mm (white)
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Buy Perforated film 100 cm / 20 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	ABS 500 x 400 x 1,5 mm (white)
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
2 x	Nylon threaded block M5 (2 uds)
1 x	Landing gear clamp for Ø 3 mm (4 uds)
1 x	Landing gear axle Ø 4 mm (2 uds)
1 x	Faucet FESTO
1 x	Long pinned hinge (12 uds)
2 x	Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x	69x25 mm (2.75") axle Ø4 mm aluminium core wheel
1 x	45x9 mm foam special light KOVO wheel with radius (2 pcs)
1 x	64x20 mm (2.5") Type jets aluminium core wheel
1 x	110x55 mm SLH KOVO wheel
1 x	152x46 Ø6.0 mm aluminium core wheel
1 x	32x9 mm foam standar KOVO wheel (2 pcs)
1 x	76x23 Ø3.5 mm aluminium core wheel
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Dual Sequencer Gear and Canopy
1 x	Dust collector for mould cleaning
1 x	Ball Link Plier
1 x	Digital precision scale up to 2000 g
1 x	Hot Glue Stick BLACK
1 x	Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Hot Glue Stick GREEN
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Carbon plate 350x150x1.0 mm
1 x	Fiberglass motor-holder for electric motors
1 x	Motor mount for 1 m models
1 x	Central support Speed 600
1 x	Wheel cover holder Ø 5 mm (2 uds)
1 x	T-Hose connector 3-3-3 mm
1 x	Wheel cover holder Ø 3 mm (2 uds)
1 x	Quick hose connector 6-6 mm
1 x	Racor 3/3 mm
1 x	Quick hose connector 3-3 mm
1 x	Y-Hose connector 4-4-4mm
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x	Red smoke canister 140 g
1 x	Propeller Pleg CAM Carbon 14x8
1 x	Propeller Pleg CAM Carbon 13x11
1 x	Electric rocket starters (6 pcs)
1 x	Propeller Pleg CAM Carbon 11x10
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Robart Door Hinge (Pk2)
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Glass fabric 49 g/m² (1,27 x 10 m)
1 x	Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x	Glass fabric 80 g/m² (silane, twill) 100 cm x 50m
1 x	Peel ply 100 g/m² (plain weave) 50 cm x 2m
1 x	Glass fabric 49 g/m² (1,27 x 20 m)
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m
1 x	Peel ply 64 g/m² (plain weave) 150 cm x 20m
1 x	PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x	Glass fibre braided sleeve (45mm) roll 10m
1 x	Glass fibre braided sleeve (45mm) roll 20m
1 x	Glass fibre sleeve Ø 20 mm
1 x	Indoor motor holder
1 x	Frontal support Speed 280
1 x	Size "M" motor holder for class 400
1 x	Motor mount for 1200 mm models
1 x	Metalic motor holder for class 550-600
1 x	Central support Speed 280
1 x	A50 Motor Mount Alu complete set
1 x	Frontal support Speed 600
1 x	Frontal support Speed 400/480
1 x
1 x	Size "M" motor holder for class 400
1 x	Cooler motor type 400
1 x	Z-shaped servo mount
1 x	Racor 2/3 mm
1 x	T-Hose connector 2-2-2 mm
1 x	Wheel collar 3 mm Ø (4 uds)
1 x	Tap FESTO 6-6 mm
1 x	Y-Hose connector 4mm
1 x	Servo arm with 6 mm hole to FEMA 9800A
1 x	T-Hose connector 4-4-4mm
1 x	Bungee HLG Premium
1 x	Tap FESTO 4-4 mm
1 x	Y-Hose connector 2-2-2 mm
1 x	Servo arm with 4 mm hole to FEMA 9810A
1 x	Racor 4/3 mm
1 x	Wheel cover holder Ø 4 mm (2 uds)
1 x	KIRA 400-34
1 x	KIRA 600-16
1 x	JIVE 120+HV Esc
1 x	Esc KOSMIK 210 HV-I COOL
1 x	KIRA 500-36 6,7:1
2 x	Female connector for 6 pines AWG
2 x	Male connector JST SH 1.0mm with 10 cm wire
2 x	Red copper lacquer wire Ø0,2 mm (5 m)
2 x	Extension 5 lipos JST/C
2 x	SWTU2 switch
2 x	Pins M connect Multipin connectors AWG 20-24
2 x	TP/TopFuel - XH 2/3S Adapter
2 x	CC 01
1 x	SPS 70V 100/200 A
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	PVC grid diagonal 290x185x0.32 mm
1 x	Extension 5 lipos JST - JST/C
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Opto Gas Engine Kill Switch
1 x	Female connector JST SH 1.0mm with 10 cm wire
1 x	MAX BEC 2D plus EX
1 x	MPS Gas-Cap-Powerswitch
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Extension 2/3 lipos JST/C
1 x	SBEC 40
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	CC 03
1 x	Male Prolonger TP 4/5S
1 x	MAX BEC 2
1 x	Opto Gas Engine Kill Switch
1 x	JETImodel DPS 40
1 x	30 cm BEC cable (female)
1 x	CC 05
1 x	Selfstart electronic switch
1 x	Connector Sub-D 2+5 Female

8,640.09EUR