1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x CNC FPV Display screen&Transmitter Holder Vertical
2 x APM2.6 Power module with 5.3V DC BEC
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
1 x Motor 2212 (1000KV) Quadcopter F450
1 x LA500 pilot-seat set
1 x LA500 rotor head shaft
1 x LA500 pre-rotation gear
1 x Motor rotor LA-500
1 x Ferrita 17x10x6.5 mm
1 x T-Motor MN705-S Kv125 (pack 2 uds)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x Interface Realflight Simulator
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x RF9 Flight Simulator with Spektrum Controller
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x ESC ALPHA 60A HV
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Fixed launching hook
1 x Slave-cable USB Easy Sim
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Horn 6/20 with M3 Bearing
1 x Cable control set
1 x USB Mini Camera endoscope
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x 1/6 Pilot "John"
1 x 30 cm DEANS female connector
1 x LA500 Autogyro
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x LOWER TOW HOOK
1 x Straightened threaded rod M2-1m
1 x Horn DU-BRO 1/2 (2 pcs)
1 x 6 mm aluminium horn with patella
1 x Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x Brass control horn M4 short for wire (4 pcs)
1 x Horn for flap control (1 pcs)
1 x Horn 6/35 with M3 Bearing
1 x Pilot "Duke" Legends Series (Slimline)
1 x Pilot "Adolf" Legends Series (Slimline)
1 x 1/6 Pilot "Cindy"
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x Medidor ángulos y/o incidencias
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Piloto Jet "Green" 1/6 Scale
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x Conector BEC male (10 pcs)
1 x XH female balance (5S) connector (2 pcs)
1 x Gold antispark 5,5 mm plug
1 x Connectors banna gold 5,5 mm (M/F)
1 x Connectors banna oro 6,0 mm (M/F)
1 x 2 mm male connector (2 pcs) with safety connector
1 x Wing connector 8pin with pin strip, plug & socket
1 x Carbon plate 350x150x3.0 mm
1 x Spare Part Frame Set for EACHINE RACER 250
1 x F9F COUGAR Grey ARF 1.562 mm
1 x 50N turbine start protection tube
1 x Motor Mega AC 16/25/03
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x HDT Jet Central
1 x Telemetry adapter JestMunt
1 x FOD guard for VT80BL, M90, M100K, M100XBL, M140K, M140XBL and M
1 x Turbina JetsMunt M122 NG
1 x BULL MØ1 2.600mm "McLAREN-GULF"
1 x Set stickers JEEMO "Andy"
1 x BULL MØ1 2.600mm ORANGE
1 x L-39 Albatros 1:4.75, Electric retract landing gear
1 x F-4 Phantom Scale 1:7, Electric retract landing gear
1 x BULL MØ1 2.600mm BLUE
1 x F-16 Falcon Black Knights 1:6 (1630 mm)
1 x BOEING 727 kit
1 x Motor Mega AC 16/07/08
1 x F-16 Scale 1:6 (1.630mm)
1 x Electric Landing Gear GALEB G4
1 x TX 250 mW especial GOPRO
1 x Double aluminium servo arm V1-Futaba 2,5 inch M3 (red)
1 x Red aluminium servo arm V1-Futaba 15 mm iM2
1 x Ferrita 27x14x7 mm
1 x Red aluminium servo arm V2-Futaba 17 mm iM2
1 x Gold aluminium servo arm V2-JR 1,0" inch M3
1 x Blue aluminium double servo arm HITEC 40 mm M3 F3A
1 x Blue aluminium servo arm V2-Hitec 1,0 inch M3
1 x Red aluminium servo arm V2-Futaba 1,25" inch M3
1 x Red aluminium double servo arm FUTABA 40 mm M3 F3A
1 x Red aluminium servo arm V2-Futaba 1,75" inch M3
1 x Red aluminium servo arm V1-Futaba 1,5" inch M3
1 x Blue aluminium servo arm V1-Hitec 1,25" inch M3
1 x Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x Red aluminium servo arm V1-Futaba 1,0" inch M2
1 x Red aluminium servo arm V1-Futaba 20 mm M2
1 x Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A
26,733.94EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies