Top » Catalog » Hardware » Power supply system/Data Recordi » Jeti » JETCB320

398.99EUR

DUPLEX 2.4EX Central Box 320
[JETCB320]

JETI Duplex 2.4EX Central Box 320

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements. The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Motor B40 9L + MAXON 4,4:1 Keramik
249.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Cable Cargador FUTABA
1 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	Long pinned hinge (6 uds)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	Small pinned hinge (12 uds)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
2 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Extension 7.5 cm
1 x	Premium servo extension 75cm
1 x	100m servo "Premium" wire (white/red/blue)
1 x	Micro flex hinge (12 uds)
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Premium servo extension 25cm
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	Futaba male 40 cm extension
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Motor mount VANQUIST 48" F3A
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	Ply-Span 450x600/13g Yellow
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	ORACOVER transparent Yellow (10 m)
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x	1/10 Pilot "Jack"
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	2,5x60 mm allen screwdriver
2 x	1/7 Pilot "Japanese"
1 x	1/12 Pilot "Fighter"
1 x	Hot Glue Stick GREEN
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Round Rod 5,0x1000 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Extinguisher CO2 - 2 Kg
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Gracia (Top Model)
1 x	Actuador lineal HLS12-100210-7.4v
1 x	10 mm gas motor standoff
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Extension PVC 150 cm (Graupner)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	Motor mount class 48"
1 x	Joint with bearing M2 22x5,5
1 x	Futaba Female 40 cm extension
1 x	Silicone red 0,25 mm² wire (25 m)
1 x	Extension silicon 30 cm female (Futaba)
1 x	Cabel "Y" 30 cm (graupner)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	18 mm reinforced hinge
1 x	aluminium servo arm V2-JR 2,0 inch M3
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Aluminium ignition bad (red)
1 x	Threaded coupler M2 (10 uds)
1 x	Fournier RF-4D
1 x	Futaba Female 40 cm extension
1 x	White silicone 0,25 mm² wire (25 m)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	M3 Maxi ball link (2 uds)
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	10 mm Quick clamp_L (6 pcs)
1 x	Glases Innovation Plus
1 x	WingFix ULTRA Black Edition
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Piloto JET 1:3,5
1 x	Oracover Verde 2 m
1 x	USB Mini Camera endoscope
1 x	1/12 Pilot "Cougar"
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Oracover Green10 m
1 x	Beech dowels 3.0 x 1000 mm
2 x	1/4 Pilot "Mike"
1 x	Spikes Band (5 m)
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Copier 2x20 cm pcs
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Support Flush MPX Conector (6 pcs)
1 x	115x29 mm (4.50") Type jets aluminium core wheel
1 x	102 mm INO spinner (carbon imitation)
1 x	Gracia Maxi ARF, spare wings (Top Model)
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	102x26 Ø6.0 mm aluminium core wheel
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Ball link M1.6 (6 uds)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Joint with bearing M3 22x5,5
1 x	Extension silicon 30 cm male (Futaba)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Premium servo extension 50cm
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	M3 Maxi ball link (2 uds)
2 x	20x1000 mm Ring Strap Back To Back
1 x	Silicone 0,50 qmm servos wire Graupner(100 m)
1 x	M2,5 5Diam metal ball link V3 (2 pcs)
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Green silicone 0,25 qmm wire (50 m)
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	Socket head ball link M3 (2 uds)
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	50 mm gas motor standoff
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Xplorer4 anemometro
1 x	Extension 90 cm (Futaba)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Fixed launching hook
1 x	Extension 100 cm (Futaba)
1 x	Silicone 0,50 qmm servos wire Graupner(5 m)
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	Albatros ,spare fuselage (Top Model)
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	ENIGMA ARF
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Threaded coupler M3 (10 uds)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Vasa model Catapult
1 x	Aero-Master (Aero-naut)
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Tow hook for tug
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	Motor mount EDGE 540 48"
1 x	Ball link M2,5 (10 pcs)
1 x	Bungee HLG Premium
1 x	15 mm reinforced hinge
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Fascination 3600 mm, Spare Wings (Top Model)
1 x	Ion Pro NG electric with flaps GREEN Fluor (JP Model)
1 x	Fascination 3600 mm (Top Model)
1 x	Challenger ARF (Top Model)
1 x	Silicone 0,35 qmm servos wire Graupner(100 m)
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	10 mm floating pad (72 pcs)
1 x	10 mm gas motor standoff
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Blue metalic ball link M2/2 azul (2 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	ASG 32 560 mm
1 x	200m servo "Premium" wire (white/red/blue)
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Flap hinge (6 pcs)
1 x	35 mm gas motor standoff
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Extension silicon 100 cm (Graupner)
1 x	M2,5 5Diam short black ball link V2 (2 pcs)
1 x	Albatros red/white (Top Model)
1 x	30 mm gas motor standoff
1 x	Xplorer2 anemometro
1 x	Socket head ball link M3 (2 uds)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Medidor ángulos y/o incidencias
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	PPM Encoder Module
1 x	Glases Flitemaster
1 x	Glases Nimbus
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Glases Stratus
1 x	Tube Pitot to PIXHAWK
1 x	Angle measurer
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Straightened threaded rod M3 - 1m
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Z Bender - S Type Tool
1 x	BALSA leading edge 8x10x1000 mm
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Marker ties (20 pcs)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Oracover Azul 2 m
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	2,0x50 mm allen screwdriver
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Oracover Yellow CUB 2 m
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	Ring 320 mm length (5 pcs)
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	Pilot "Anthony" (Slimline)
1 x	Oracover Brown 2 m
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Tape GFK 38 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Oracover GREY Seafire Sea 2m
1 x	SE Ring 450 mm (2 pcs)
1 x	Field folding model stand SebArt
1 x
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Oracover Black 10 m
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	800TVL CMOS camera for FPV
1 x	Crimping tool
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	1/12 Pilot "Tom"
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Dust collector for mould cleaning
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Piloto Jet "Red" 1/6 Scale
1 x	ORACOVER Fluor red (2 m)
1 x	Screwdriver for Hexagon 1,5mm
1 x	Cinta Goldfix 1m
1 x	Oratex Yellow Cub 10 m
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	SIMtransmitter 6 Mode 2
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	SE Ring 240 mm (2 pcs)
1 x	One touch canopy lock
1 x	Oracover Red 2 m
1 x	Tape GFK 25 mm
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Straightened rod Ø 1.0 mm x 1000 mm
2 x	1/6 Pilot "John"
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	SE Ring 330 mm (4 pcs)
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Covered closure or fairings
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	SE Ring 250 mm (2 pcs)
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Ply-Span 450x600/13g Blue
1 x	3,0x60 mm allen screwdriver
1 x	SE Ring 200 mm (2 pcs)
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Tape GFK 50 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Ply-Span 450x600/13g White
1 x	1,5x50 mm allen screwdriver
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	1/4 Pilot "Heidi"
1 x	Crimping tool
1 x	Ball Link Plier
1 x	BALSA triangular 8x8x1000 mm
1 x	Z Bender - S Type Tool
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Pilot "Goose" (Slimline)
1 x	Hot Glue Stick BLACK
1 x	Vacuum pump 12 CFM
1 x	Canopy Latch
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Oracover CHROME 2m
1 x	Oracover Yellow CADMIO 10 m
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Vacuum pump P1-N
1 x	Slave-cable USB Easy Sim
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	1/6 Pilot "Garry"
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Tube support Ø 6mm (10 pcs)
1 x	1/10 Pilot "Jimmy"
1 x	Round Rod 2,0x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Round Rod 6,0x1000 mm
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Swing 1000
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	TMM 2512-3S heli
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Gracia Maxi ARF, bags (Top Model)
1 x	110x55 mm C SLH KOVO wheel
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Ferrita 17x10x6.5 mm
1 x	102 mm aluminium spinner
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Ferrita con funda
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Support Pitot JETI
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Q-12 2000 mm Electric
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x
1 x	152x46 Ø6.0 mm aluminium core wheel
1 x	22m Fitting barb
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Gracia Maxi ARF (Top Model)
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm

16,574.49EUR