Top » Catalog » Hardware » Chargers » Chargers » iCharger » ROIJS137172

440.00EUR

Jun-Si iCharger 4010 Duo
[ROIJS137172]

Product description:
The Jun-si iCharger 4010 Duo is a handy universal charger which can be used for charging and uncharging NiMH, LiPo, LiIo as well as LiFe and lead batteries.

Especially suitable for lithium cells. Necessary balancers are integrated.

Delivery contains Jun-Si iCharger 4010 Duo, 2 balancer conversion boards (Align/Dualsky system), 2 connection cables for balancer conversion boards, 2 charging cables, driver CD, USB cable, connection cable power supply and German operating manual.

Specifications:
- Input voltage: 9.0 V - 50.0 V DC
- Max. input current: 65.0 A
- Battery types: LiPo, LiIo, LiFe, NiCd, NiMH
- Charging wattage: 1,400 W each output with min. 23.5 V input voltage, 2,000W in synchronous mode
- Charging current: 40.0 A each output, 70.0 A in synchronous mode
- Discharging wattage: 130 W each output, 200 W in synchronous mode
- External discharging wattage: 1,600 W each output, 3,200W in synchronous mode over external discharging resistors
- Energetic recovery wattage: 1,400 W each output, 2,000 W in synchronous mode
- Balancer current: 1.2 A each output, 2.4 A in synchronous mode
- Cutoff method: Delta-Peak method for NiCd and NiMH batteries, constant current/constant voltage for Lithium and Pb batteries
- Display: Color TFT display
- PC link: USB port
- Storage medium: SD card
- Weight: 1,470 g (51.85 oz)
- Dimensions approx. : 210x140x80 mm (8.27x5.51x3.15 in)

Features:
- Progressive converter technology (buck-boost DC/DC converter) for high efficiency
- Very high charging wattage for up to 2,000 W
- Charging currents up to 40 A each output, with coupled charging outputs even up to 70 A
- Up to 10 cells of LiPo, LiIo and LiFe can be charged and discharged on each output. The voltages are balanced with a high balancer current of 1.2 A considering the internal resistance.
- RPM regulated van control
- Over temperature protection
- Saving of up to 64 data sets and import/export from/to SD card
- Display of all important data via color display: Current, voltage, wattage, capacity, internal cell resistance, battery temperature, charger status
- Different descharging modes: Normal and regenerative discharging, high current descharging with external resistor - Detection of single cells' internal resistance as well as battery pack's internal resistance
- Mulitple safety features for secure operating: Input and output polarity protection, current and voltage protection, battery over temperature protection, protection of over capacity

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
    Chargers->
      Gens Ace - Tattu
      Graupner
      Hitec
      iCharger
      Multiplex
      Orbit
      Others
      PowerBox
      Revolectrix
    Balacers
    Power supplies
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Servo HITEC D89 MW
62.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Prop Shaft Adapter 5 mm "long"
2 x	2,3 mm Prop Adapter M6
1 x	5 mm Prop Adapter M6
1 x	5 mm Prop Adapter M8
1 x	Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	4 mm Prop Adapter M8
1 x	4 mm Prop Adapter M8
1 x	4 mm Prop Adapter CN-Spinner
1 x	2 mm Prop Adapter M6
1 x	3.2 mm Prop Adapter M8
1 x	Prop Shaft Adapter 8 mm/M12 "long"
1 x	5 mm Prop Adapter CN-Spinner
1 x	3 mm Prop Adapter M6
1 x	2,3 mm Prop Adapter M6
1 x	10 mm Prop Adapter M12
1 x	6 mm Prop Adapter M8
1 x	3 mm Prop Adapter M6
2 x	Big Crow DLE-170M
1 x	Small Crow DLE-170M
1 x	Motor DLE 200cc Premium Muffler
1 x	Motor DLE 430 cc - Paramotors
1 x	Motor DLE 170 M- Paramotors
1 x	Silent-blocks DLE 170M
1 x	SE Ring HACKER 300 mm (2 pcs)
2 x	3,2 mm Prop Adapter M8
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	Altimeter Altis NAO
1 x	Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora
1 x	Altimeter Altis V4
1 x	USBCOM 5i
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Sanyo Eneloop AA 1,2 V 2400 mAh battery
2 x	RX Battery Eneloop 4,8 V JR 2500 mAh
2 x	Motor RACE 20 Navy 12v
2 x	Electronic fog horn
2 x	Motor ACTRO 28-4-880
1 x	Motor RACE 720 Navy 12v
2 x	ESC Actro-Marine 30A
1 x	BOX-Setup Actro-marine
1 x	Fueraborda RETRO
1 x	33,0 mm propeller (rigth propeller)
1 x	45 mm flag mast
1 x	25,0 mm 3-BL M4 hydro-propeller (left hydropropeller)
1 x	270 mm 3/3 mm shaft ship
1 x	Motor DLE 200cc Std
2 x	SUS wire 3m (nylon coated)
2 x	Cierre cabina aluminio Ø5, I=16 mm
2 x	Steering arm 12 mm Ø 4 mm
2 x	Locking cable tie 3.2x142 (uds)
2 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
2 x	Cabin latch Fox MDM1 4m (pair)
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Crimping tool
1 x	Oracover GREY Seafire Sea 2m
1 x	Conector MR-60 (pareja)
1 x	Pushrod octagone 3/2
2 x	Canopy Lock V1 M3 Blue (2 pcs)
2 x	Aluminium alloy coupler for carbon tube 6/M4
2 x	28x5 mm wires output (2 pcs)
2 x	Allen wheel collar M3x5
2 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Landing gear frontal support 29x26x13,5
2 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
2 x	Landing gear frontal support 25x32x16
1 x	PH5 adapter for 5mm M8 axi for AXI2820 y 2826
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
2 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
2 x	Cable tie mounts 4.3 (4 uds)
1 x	Pushrod octagone 4/3
2 x	Wheel collar 3 mm Ø (4 uds)
1 x	Cierre cabina aluminio Ø4, I=10 mm
2 x	Kit hydraulic brake
2 x	Pushrod greyline 3/2 with coupler M3 L: 1000 mm
1 x	Canopy Latch
1 x	11 mm Rubber pads (14 pcs)
2 x	Steering arm 16 mm Ø 4 mm (2 uds)
2 x	Wheel collar 5 mm Ø (4 uds)
2 x	Wheel collar 3.5 mm Ø (4 uds)
2 x	Cockpit plastic closing
1 x	Propeller 9x7 SlowFlyer
2 x	DYNAMOMETER S-1580
2 x	Telemetry interface ALTIS 20 cm
1 x	Sanyo TX Battery Eneloop 9,6 V Futaba
1 x	Sanyo RX Battery Eneloop RX 4,8 V Futaba
1 x	Sanyo TX Battery Eneloop 9,6 V Hitec
1 x	Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x	Battery LiFe TopFuel 3100 mAh 2s MTAG 30C
1 x	Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x	Battery LiFe TopFuel 3100 mAh 4s MTAG 30C
2 x	Jun-Si iCharger 4010 Duo
1 x	Sanyo RX Battery Eneloop 6,0 V Futaba
1 x	Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x	Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x	Sanyo RX Battery Eneloop 6,0 V FUT
1 x	Tester LiPo/LiIon/LiMn/LiFe
1 x	Sanyo RX Battery Eneloop 4,8 V JR
1 x	Robbe Modellsport ROOKIE 35 ESC FOR BRUSH MO TORS
1 x	ABS angle 2,0x2,0x1000 mm
1 x	290x4 mm M4 shaft ship
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Klumpblock (Plastik), Höhe 5 mm, 1 Rille, 20 Stück
1 x	Aqua RACE 70 (without motor)
1 x	ABS tube 18.0x16.0x1000 mm
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	290 mm M4/M4 6.0x4.0 mm shaft ship
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x	41x5,5 mm wires output (2 pcs)
1 x	Pushrod greyline 4/3 with coupler M3
1 x	Pushrod greyline 3/2 with coupler M2 L: 1000 mm
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs)
1 x	Cockpit aluminium closing 5.4g
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Window mounting channel Type H 2.5x0.5 (2 m)
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	100 mm rods + T patellas set for direction control
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Clip fixing for wing (2 pcs)
1 x	Screw-lock connector M2 (2 uds)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Press fitting for 0,5 diam. steel cable (10 pcs)
1 x	Control for forward wheel (MINI)
1 x	Komet Pump
1 x	Capstan of plastic 125x72x45 mm
1 x	Cannon 53/6 mm
1 x	Boat 43 mm (5 pcs)
1 x	Klumpblock (Plastik), Höhe 6 mm, 1 Rille, 20 Stück
1 x	Offshore-Schleppwinde Bs
2 x	Rotorshape Autogyro
1 x	Batería LiPo GENS 5000 mAh 5S 18.5V 60C (Gens Ace)
2 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs)
1 x	Pushrod octagone 4/3 with coupler M3
1 x	Pushrod octagone 3/2 with coupler M2
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Tip wing protector 28x10x12 (2 pcs)
1 x	Allen wheel collar M4x4
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs)
1 x	One touch canopy lock
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled
1 x	Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs)
1 x	250 mm / 16 mm Airbrakes
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	Lead with adhesive (2 pcs)
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	Cockpit aluminium closing
1 x	80 mm rods set for direction control
1 x	Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs)
1 x	45 mm rods + T patellas set for direction control
1 x	Cockpit latch closing I=10 mm
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Triple rod con. 3mm Pushrod (2 pcs)
1 x	140 mm rods set for direction control
1 x	Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	Wing bolts M6 Steel screw Red (2 pcs)
1 x	Snap for floding prop for 2 mm axi
1 x	Split pin 1x8 mm (10 uds)
1 x	Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs)
1 x	Window mounting channel 5m
1 x	Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x	Snap long M2 (10 uds)
1 x	Brake for 140 mm wheels
1 x	Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs)
1 x	Wing bolts M6 Steel screw Blue (2 pcs)
1 x	Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs)
1 x	Brazo Servo XTorque 52 mm HITEC 25T-6
1 x	Futaba 54 mm servo arm with ball link
1 x	Futaba 24/30 mm servo pull-pull double arm with ball link
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	46 mm Futaba servo arm tandem with ball link
1 x	Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al
1 x	17 mm servo arm with ball link DES Graupner
1 x	Adapter rotula M3
1 x	Futaba 76/92 mm servo pull-pull double arm with ball link
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	White silicone 0,25 qmm wire (150 m)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	30 cm BEC cable (male)
1 x	Allen wheel collar M4x6
1 x	Optical RPM Sensor

19,393.90EUR

Manufacturers

Notifications

Notify me of updates to Jun-Si iCharger 4010 Duo

Reviews

Write a review on this product!

Languages

Currencies

Insurance

440.00EUR

Jun-Si iCharger 4010 Duo[ROIJS137172]

under request

Jun-Si iCharger 4010 Duo
[ROIJS137172]