2 x | 800TVL CMOS camera for FPV |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
2 x | Canopy Latch |
2 x | Steering arm 12 mm Ø 4 mm |
3 x | Stainless steel cable Ø 0.62 mm (10 m) |
2 x | Locking cable tie 2.5x100 (uds) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Electric spoiler 250 mm (2 pcs) |
3 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | Ball link M3 RPA's-UAV's |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Ball link M3 (6 uds) |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | Joint with bearing M2 22x5,5 |
1 x | Socket head long ball link M3 (2 uds) |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
2 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Socket head ball link M3 (2 uds) |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | Ply-Span 450x600/13g Blue |
1 x | Straightened threaded rod M2-1m |
1 x | PPM Encoder Module |
2 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | Aceite DELUXE turbine Jet Oil 1 litro |
2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
2 x | Split pin 1x8 mm (10 uds) |
2 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Pushrod octagone 3/2 with coupler M2 |
3 x | Brazo servo MKS X8 Metal L:1.25/1.5 inc |
1 x | Allen wheel collar M3x3 |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
2 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
2 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
2 x | Snap for floding prop for 2 mm axi |
1 x | Pushrod greyline 3/2 with coupler M2 |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
2 x | Split pin 1.6x16 mm (10 uds) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
2 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Pushrod octagone 3/2 |
2 x | Cable grommet Ø 4 mm (4 uds) |
2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Cockpit plastic closing |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | 28x5 mm wires output (2 pcs) |
3 x | 41x5,5 mm wires output (2 pcs) |
1 x | Rotorshape Autogyro |
1 x | Screw M3x16 |
1 x | Blades 330mm |
1 x | Complet landing gear |
1 x | Cierva C30 Body Spain |
1 x | Head upper part |
1 x | Autogyro Cierva C30 Spain |
1 x | Head lower part New |
1 x | Bearing 3x6x2,5 |
1 x | Wheel keeper washer |
1 x | Tail tube RAINBOW |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
1 x | Servo KST X06H - 1.8Kg.cm 7mm 6g |
1 x | Futaba BLS255/272/471SV - Gear Set |
1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | 57 mm micro-mini servo cover |
1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Futaba S9650/9670SV - Upper Case |
1 x | Servo FUTABA S 3072 HV S-Bus |
1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
2 x | Servo MKS HV1220 |
2 x | SERVO DES 658 BB MG |
1 x | DYMOND VTX UBS Programming adapter |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Bags MB-339 (Wings & Elevators) |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Carbon blade 230 mm |
1 x | Cabel "Y" 15 cm |
1 x | Bags wings/rudder ODYSSEY |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Antenna holder bracket double |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Servo Dymond D 37 Eco |
1 x | Gear for D 54 |
2 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
1 x | GPS Logger Dymond |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
2 x | Adap/Exten for Futaba 12-14C |
2 x | 90 mm CFK long Spinner fixed by a central screw |
2 x | 89 mm INO spinner (carbon imitation) |
1 x | Bags de Luxe ASPIRE |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Black "FUEL VENT" round aluminum overflow socket |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Birch plywood plate 600x300x4.0 mm |
3 x | AC-10 pre-rotacion with motor |
2 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Carbon blade 3D 230 mm |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Baseplate servo |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Aluminum Fold Prop Spinner 38 mm / 5 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | 45 mm rods set for direction control |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | Split M1,2x10 (10 pcs) |
2 x | Snap pin for micro clevis (10 uds) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | 80 mm rods set for direction control |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
2 x | Cockpit aluminium closing 5.4g |
1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
2 x | Steering arm 16 mm Ø 3 mm |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
2 x | 250 mm / 16 mm Airbrakes |
1 x | One touch canopy lock |
3 x | Landing gear frontal support 25x32x16 |
1 x | Futaba 2x20 mm servo double arm |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Servo Mount S (red) |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Blade holder upper |
1 x | ESC Ripmax QUANTUM 80A SBEC |
1 x | Propeller APC 14x8.5 Electric Pusher |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | LASER 73" 1.85m (05) PILOT |
1 x | Servo KST BLS825 V8.0 HV 35Kg 8.4v |
1 x | Servo Bolt M3x8 (8 pcs) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | 140 mm rods set for direction control |
1 x | Cockpit aluminium closing |
1 x | Window mounting channel 5m |
1 x | Control for forward wheel (MINI) |
1 x | Clip fixing for wing (2 pcs) |
2 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Cockpit latch closing I=10 mm |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Snap short M2 (10 uds) |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Cockpit aluminium closing 4.7g |
2 x | Snap long M2 (10 uds) |
1 x | Cable tie mounts 4.3 (4 uds) |
2 x | Allen wheel collar M3x5 |
1 x | Wheel collar 2 mm Ø (4 uds) |
2 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | Futaba 38 mm servo arm with ball link |
1 x | XTorque CFK Servohebel 38 HITEC 25T |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Hitec 20 mm servo arm |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | 90 mm rods + T patellas set for direction control |
1 x | XCALIBUR Fuel Tank with built in UAT |
1 x | Tyres 70 mm Xclaibur (2 pcs) |
1 x | QUANTUM II 55 Brushless Motor |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Propeller POWER-PROP 13x9 |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Propeller POWER-PROP 13x9 Izda |
1 x | Propeller POWER-PROP 14x9 |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
1 x | Programador FUTABA USB CIU-3 |
1 x | Blue aluminium double servo arm HITEC 40 mm M3 F3A |
1 x | Servo DITEX TD2612S |
2 x | HV6150 Digital Servo |
2 x | Servo MKS HBL599 SL |
1 x | Connectors DEANS (T) micro |
1 x | Air pressure gauge |
1 x | Xplorer3 anemometro |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | 102 mm aluminium spinner |
1 x | Hot Glue Stick GREEN |
1 x | 89x25 mm (3.50") Type jets aluminium core wheel |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Fod Guard 94x32 mm |
1 x | Servo DITEX EL0510M |
1 x | Soporte metal para servos |
1 x | Servo MKS HV747 |
1 x | SERVO DES 568 MG |
1 x | SERVO DES 806 Pignons |
1 x | Servo MKS HV6130 |
1 x | SERVO DES 588 BB MG |
1 x | Connectors MPX male |
2 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Spinner 105 mm CFK |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | 82 mm aluminium spinner. |
1 x | Spinner 100 mm GFK |
2 x | Aluminium servo arm (2 uds) |
1 x | TS832 to Gopro AV/Power Cable |
1 x | Male connector for 16 pines AWG |
1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
1 x | Battery Protection Circuit Board 22.2v 6s |
1 x | Servo MKS HBL380 |
1 x | Servo MKS HV6120H |
1 x | SERVO DES 806 Pignons |
1 x | Servo MKS HBL550 |
2 x | SERVO DES 707 BB MG, Pignons |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Servo MKS 6100 DS |
1 x | Servo MKS HV 777A+ |
1 x | Servo MKS HV69 |
1 x | Aluminum Fold Prop Spinner 34 mm / 3 mm |
1 x | 57 mm aluminium spinner. |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
1 x | Aluminum Fold Prop Spinner 30 mm / 5.0 mm |
1 x | Angle support XT60 conector |
1 x | 70 mm aluminium spinner. |
1 x | Z Bender - S Type Tool |
1 x | Spinner 60 mm GFK |
1 x | Hot Glue Stick RED |
1 x | Xplorer1 anemometro |
1 x | 89 mm aluminium spinner. |
1 x | Spinner 140 mm GFK |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL |
1 x | 38 mm aluminium spinner. |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | Aero shocks |
1 x | Connectors DEANS (T) |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | ProgBOX MASTER Hacker |
1 x | Combo RAY C3542-1000 + ESC 60A |
1 x | Male connector for 20 pines AWG |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Partall paste 650 g |
|
8,908.27EUR |