1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
3 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
3 x Glases Aspen
2 x Glases Moritz
4 x Glases Innovation Plus
2 x Glases Nimbus "Black"
1 x BALSA trip 6.0x6.0x1000 mm
1 x Beech dowels 4.0 x 1000 mm
3 x BALSA leading edge 8x10x1000 mm
2 x Liston HAYA 3 x 10 x 1000 mm
2 x Pine wood slat 5.0x5.0x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
3 x BALSA trip 2.0x2.0x1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Walnut wood slat 1.5x1.5x1000 mm
2 x Trailing edge BALSA 35x8x1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
3 x Pine wood slat 3.0x7.0x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x BALSA triangular 6x6x1000 mm
2 x Pine wood slat 6.0x6.0x1000 mm
1 x Walnut wood slat 2.0x2.0x1000 mm
2 x BALSA trip 2.0x10.0x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
2 x Pine wood slat 3.0x10.0x1000 mm
2 x BALSA triangular 8x8x1000 mm
2 x Beech dowels 10 mm x 1000 mm
2 x Pine wood slat 3.0x5.0x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Locking cable tie 4.6x203 (uds)
1 x Field folding model stand SebArt
1 x Spinner propeller pleg. 40 mm / 3,17 mm
1 x White smoke bombs AX-9 (10 pcs)
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x 300x4 mm M4 shaft ship
2 x Glases Ace
1 x 3,2 mm Prop Adapter M8
1 x LED wire (rojo - 2pcs)
1 x Jet Afterburner Simulator NF-Jet1RY Set
1 x 16x10 tree blades propeller Master Airscrew
1 x NF-2 RC set
1 x 1000 ml sealer (DOPE)
1 x NF-3X-350 set
1 x 10 mm portholes (10 pcs)
1 x Jet Afterburner Simulator NF-Jet3 RY
1 x 11x7 tree blades propeller
3 x Glases Flitemaster
1 x 15x7 tree blades propeller LEFT
1 x 12 mm mast holder
1 x "L" servo arm 65x49 mm (2 pcs)
1 x 12 mm portholes (10 pcs)
2 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Support XT60 conector (2 pcs)
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x SE Ring 250 mm (2 pcs)
2 x Tape GFK 38 mm
1 x Motor OS 3820-1200 electric
1 x Surprise XII Rudder (Freudenthaler)
2 x SE Ring 240 mm (2 pcs)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x Extractor piñones 2.3/3.2 mm
2 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x 20x200 mm battery rings
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x Waterproof adhesive tape, width 19mm, length 25m
2 x SE Ring 400 mm (2 pcs)
2 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x SE Ring 300 mm (2 pcs)
2 x BALSA trip 8.0x8.0x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Balsa panel 1.0x100x1000 mm
2 x Beech dowels 3.0 x 1000 mm
1 x IMPULSE 2 F3F
1 x Servo FUTABA S 3071 HV S-Bus
1 x Futaba S3010 Servo - Standard BB 0.16s/6.5kg
1 x Servo FUTABA BLS175 SV
1 x Servo FUTABA BLS 272SV
1 x 34 mm Alu spinner 4 mm pleg. propeller
1 x Servoarm Aluminium SH-82
1 x Servo KST DS125MG servo ala 10mm 28g 7Kg
1 x 20-25mm Servo Arm
1 x Savox Brushless Servo SC-1267 SG
1 x SAVOX SH 0254 servo
1 x Servo SAVOX SA-1256 TG
1 x Piñones SAVOX SH-0350
1 x Actuador lineal HLS12-100210-7.4v
1 x Servo KST X20-7512 V8.0 82kg 8.4v
1 x Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
1 x Glases Stratus
1 x LED wire (green - 2pcs)
1 x LED wire (orange - 2pcs)
1 x LED blink wire flashing (blue - 2pcs)
1 x LED wire (blue - 2pcs)
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Surprise XII Horizontal Estabilizer (Freudenthaler)
1 x Adjustable brass horn threaded M3
1 x BALSA trip 4.0x4.0x1000 mm
1 x DUPLEX R7 receiver REX Assist
1 x DUPLEX RC Droid Box - DC/DS
1 x Receiver DUPLEX REX 3 2.4 GHz
1 x DUPLEX R7 REX receiver 2,4GHz A40
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Tape GFK 25 mm
1 x DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x Battery RX JETI LiIon RB 5200 7.2v
1 x LED blink wire flashing (orange - 2pcs)
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x 40 mm 1/4" Race propeller (rigth hydropropeller)
1 x Flap hinge 33x9 mm (6 pcs)
1 x Decorative caps, multicoloured
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x Servo KST BLS825 V8.0 HV 35Kg 8.4v
1 x DUPLEX R12 EPC receiver 2,4GHz
1 x VBar Control RX-Satellite
1 x DUPLEX R12 receiver REX Assist
1 x Receiver DUPLEX R9 EX 2.4 GHz
1 x Receiver DUPLEX R4H EX 2.4 GHz
1 x Receptor DUPLEX REX R9 Slim Assit
1 x DUPLEX R10 receiver REX Assist
1 x DUPLEX Satellite receiver Rsat 900
1 x SE Ring 480 mm (2 pcs)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring HACKER 300 mm (2 pcs)
1 x Cinta Goldfix 1m
1 x SE Ring 330 mm (4 pcs)
1 x 20x1000 mm Ring Strap Back To Back
1 x 
1 x SE Ring 200 mm (2 pcs)
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Spikes Band (5 m)
1 x Tape GFK 50 mm
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Balsa panel 1.5x100x1000 mm
1 x Gracia (Top Model)
1 x DSM 10 Dual Switch Mixer
1 x DUPLEX 2.4EX Satellite receiver Rsat 2
1 x Car Charger DC/DS-16
1 x DUPLEX 2.4EX MULi 6s M
2 x Mixers smoke bombs AX-60 (5 pcs)
1 x DUPLEX 2.4EX MU 3 Sensor
1 x DUPLEX R7 REX receiver 2,4GHz
1 x DUPLEX 2.4EX MFlow2 Gas 800
1 x AddCAP 10AS capacitors
1 x DUPLEX 2.4EX Central Box 210
8,408.21EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies