1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Piñones servo MICRO BB
1 x Ferrita 17x10x6.5 mm
1 x Bayoneta aluminio ø30×1 mm x 1m
1 x Ferrita con funda
1 x Liston ABS 1,5x2,0x1000 mm
1 x Acoplador M2,5 Ø 3 mm (10 pcs)
1 x Acople ALU M2,5 Ø 6 (2 uds)
1 x Clevis con trasmisión M3
1 x Varilla ABS 6,0x1000 mm
1 x Acoplador para cable M4 (10 pcs)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Ball link M2 (10 pcs)
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Acoplador Micro M2 Ø 1 mm (10 pcs)
1 x Ball link Aluminio M3 (2 pcs)
1 x Liston ABS 2.0x8.0x1000 mm
1 x Liston ABS 1,0x5,0x1000 mm
1 x Liston ABS 1,5x6,0x1000 mm
1 x Liston ABS 2.0x5.0x1000 mm
1 x Varilla ABS 2,0x1000 mm
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
2 x Acoplador Micro M2 Ø 0,8 mm (10 pcs)
1 x Ball link latón BS M3 V1 (10 pcs)
1 x Liston ABS 1,5x8,0x1000 mm
1 x Acople ALU M2,5 Ø 4 (2 uds)
1 x Varilla ABS 3,0x1000 mm
2 x Ball link ALU M3/2 con rodamiento (1 pcs)
1 x Varilla ABS 2,5x1000 mm
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Liston ABS I 10x5x1000 mm
1 x Acople ALU M2 Ø 4 (2 uds)
1 x Liston ABS 1,5x3,0x1000 mm
1 x Acople ALU M3 Ø 4 (2 uds)
1 x Ball link ALU M2/2 con rodamiento (1 pcs)
1 x Liston ABS H 1,5x1,5x330 mm
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Acople ALU M3 Ø 5 (2 uds)
1 x Set de Humo "S"
1 x Servo MKS 6100 DS
1 x Servo MKS HBL380
1 x Servo FUTABA BLS172 SV
1 x Brazo servo aluminio V3-Futaba 3,5" rojo
1 x Brazo servo aluminio V1-Futaba 1,0" M2 rojo
1 x Servo FUTABA BLS175 SV
1 x Gancho de lanzamiento regulable
1 x Horn aluminio roscado 6 mm con rótula
1 x Varilla carbono 1.5 mm x 2000 mm
1 x Conector ABS "L" 1.0 mm x 1000 mm
1 x Hélice POWER-PROP 7x7
1 x Tensor de riostras M2x22/35 (2pcs)
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x Servo GO-1013 MG 3.8kg
1 x Servo GO-12S69MG 26kg.cm 0.10s/60º
1 x Ancla 25 mm (2 uds)
1 x Ametralladora MG 1,8 cm (5 pcs)
1 x Ancla 35 x 22 mm (2 pcs)
1 x Ancla metal 40 mm (2 uds)
1 x Ancla Hist. 67 mm (2 uds)
1 x Base montaje Ms 12 mm
1 x Acoplador laton Ø 5 mm L: 25 mm
1 x Ancla madera 30 mm (2 uds)
1 x Acoplador laton Ø 5.0 / 4.0 mm L: 25 mm
1 x Articulación para pluma de carga, 10x5 mm (2 pcs)
1 x Ancla 16 mm (2 pcs)
1 x Ancla 80 mm (2 uds)
1 x Ancla Admiralsanker 60 mm (2pcs)
1 x Acoplador laton Ø 4.0 / 2.3 mm L: 20 mm
1 x Barandilla Ms 10x250 mm (2 pcs)
1 x Turbina XICOY X95 compact
1 x Bateria LiFe 2100 mAh 3s 25C
1 x Turbina KINGTECH K100 G4
1 x KingTech K100TP G4+ Turboprop
1 x Pasacable de goma Ø 6.4 mm (4 uds)
1 x Pasacable de goma Ø 3.2 mm (4 uds)
1 x Salida para cables 28x5 mm (2 pcs)
1 x Soporte abrazaderas 4.3 (4 uds)
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Turbina X132 H "Compact Version"
1 x Turbina X45 H "Light Version"
1 x Escapes Scale Turbo Prop K100P
1 x Turbina KINGTECH K160 G4
1 x Turbina KINGTECH K120 G4
1 x Bateria LiFe 3000 mAh 3s 25C
1 x Bayoneta aluminio/strongal D25 mm/1 m
1 x Bayoneta: Fibra de vidrio/Carbono (26.5/25 x 25/23) x 1000 mm
1 x Kwik link blanco largo (10 pcs)
1 x Terminales riostras M6x66 (2 uds)
1 x Kwik link micro 0.8mm (10 uds)
1 x Kwik link aluminio M3 L:30mm (6 uds) pinØ 1.6mm Izda
1 x Polea de bronce 14/2 (2 pcs)
1 x Pin Ø 2 mm para Kwik link MPJ2162/2163 (6 pcs)
1 x Sistema para cables (plata)
1 x Round Rod 1,0x3,5 cm
1 x Tensor de riostras M2,5x27/43 (2pcs)
1 x Kwik link y brazo de nylon M4xM2,5xL30
1 x Porta Kwik link M3 3 mm (2 pcs)
1 x Sistema para cables con tensor (negro)
1 x Liston ABS I 3,5x1,75x330 mm
1 x Kwik link micro (10 uds)
1 x Porta Kwik link M4 3 mm (2 pcs)
1 x Cono 67mm Multiplex Funracer
1 x Helice 4BL 70 mm M4 plastico Dcha
1 x Bisagra cilíndrica 2,5 Ø x 8 x 33 mm (10 pcs)
20,506.96EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas